In stock
SKU
EFLA1030B

30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

$44.99

Features:

  •     Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
  •     3.5A continuous current, 5V Switch-Mode BEC Circuit
  •     Stronger BEC for support of most 3-axis stabilization systems
  •     Drive up to 7 analog or 6 digital standard-size servos with the BEC
  •     3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  •     Programmable motor braking
  •     Safe power-arm mode prevents accidental starts
  •     Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
  •     Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  •     Programmable soft start for helis and airplanes
  •     Auto motor shut down if signal is lost or there is interference
  •     Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
  •     Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Overview:

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Specifications:

  • Continuous Maximum Current: 30A (proper cooling required)
  • Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
  • Input Connector Types: 16 AWG leads with E-flite EC3 Connector
  • Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
  • Momentary Peak Current: 35A (15 sec)
  • Length: 51.0mm (2.00 in)
  • Width: 28.0mm (1.10 in)
  • Height: 8.70mm (0.35 in)
  • Weight: 31.0 g (1.10 oz)
  • Wire Gauge: 16 AWG

Features:

  •     Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
  •     3.5A continuous current, 5V Switch-Mode BEC Circuit
  •     Stronger BEC for support of most 3-axis stabilization systems
  •     Drive up to 7 analog or 6 digital standard-size servos with the BEC
  •     3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  •     Programmable motor braking
  •     Safe power-arm mode prevents accidental starts
  •     Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
  •     Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  •     Programmable soft start for helis and airplanes
  •     Auto motor shut down if signal is lost or there is interference
  •     Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
  •     Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Overview:

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Specifications:

  • Continuous Maximum Current: 30A (proper cooling required)
  • Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
  • Input Connector Types: 16 AWG leads with E-flite EC3 Connector
  • Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
  • Momentary Peak Current: 35A (15 sec)
  • Length: 51.0mm (2.00 in)
  • Width: 28.0mm (1.10 in)
  • Height: 8.70mm (0.35 in)
  • Weight: 31.0 g (1.10 oz)
  • Wire Gauge: 16 AWG
More Information
SKU EFLA1030B
Model N/A
Product Manufacturer N/A
Write Your Own Review
Only registered users can write reviews. Please, Sign in or create an account
To Top