In stock
SKU
EFLA1040LB

40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

$69.99

Features:

  •     Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  •     5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  •     Stronger BEC for support of most 3-axis stabilization systems
  •     Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  •     3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  •     Programmable motor braking
  •     Safe power-arm mode prevents accidental starts
  •     Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  •     Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  •     Programmable soft start for helis and airplanes
  •     Auto motor shut down if signal is lost or there is interference
  •     Programmable timing—5 user-selectable ranges, use with a large variety of brushless motors

Overview:

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Specifications:

  • Continuous Maximum Current: 40A (Proper cooling and airflow required)
  • Input Connector Types: 13 AWG with E-flite EC3 Connector
  • Output Connector Types: 16 AWG with 3.5mm Gold Bullet Connectors
  • Length: 66.0mm (2.60 in)
  • Width: 31.0mm (1.20 in)
  • Height: 12.0mm (0.47 in)
  • Weight: 48.0 g (1.70 oz)
  • Cells w/BEC: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd

Features:

  •     Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  •     5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  •     Stronger BEC for support of most 3-axis stabilization systems
  •     Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  •     3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  •     Programmable motor braking
  •     Safe power-arm mode prevents accidental starts
  •     Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  •     Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  •     Programmable soft start for helis and airplanes
  •     Auto motor shut down if signal is lost or there is interference
  •     Programmable timing—5 user-selectable ranges, use with a large variety of brushless motors

Overview:

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Specifications:

  • Continuous Maximum Current: 40A (Proper cooling and airflow required)
  • Input Connector Types: 13 AWG with E-flite EC3 Connector
  • Output Connector Types: 16 AWG with 3.5mm Gold Bullet Connectors
  • Length: 66.0mm (2.60 in)
  • Width: 31.0mm (1.20 in)
  • Height: 12.0mm (0.47 in)
  • Weight: 48.0 g (1.70 oz)
  • Cells w/BEC: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
More Information
SKU EFLA1040LB
Model N/A
Product Manufacturer N/A
Write Your Own Review
Only registered users can write reviews. Please, Sign in or create an account
To Top