JET MODEL PRODUCTS

JET MODEL PRODUCTS
Desc

1 Item

View as Grid List
per page
  1. JMP MK-30 Retract Set
    $775.00
    JMP MK-30 Retract Set

    MK-30 Retract Gear System by Jet Model Products

    The MK-30 Retract Gear System was designed to meet the specific requirements of turbine models in the 20-35 lb. weight range.  Light, but tough enough for models operating from rough grass fields, the MK-30 retract gear are CNC machined from aircraft grade aluminum with an emphasis on simplicity of design.  Down locks and up locks are used with a 90 degree retraction angle as standard.  Massive ¾” bored pivot blocks receive and clamp the upper strut body.  The main gear struts retract away from the actuating cylinder and provide a high retracted strut center line.  The nose gear strut can retract over the cylinder or away from the cylinder.  The retract unit dimensions are as follows.  Height 1.375”-Width 2.5”-Length 5.0”

    A 2-way valve driven by a standard JR or Futaba mini servo controls the retract gear system.  Installations that include gear doors utilize the JMP Gear Door Sequencer.  The gear retraction and door closing is timed by the Sequencer.  Also available is the Air Line Manifold which maintains equal line pressure and simplifies air line routing.

    The actual weight limitation on the gear is somewhere around 35 lbs. of aircraft weight, but this largely depends on the strut length, field conditions, and ultimately piloting techniques.

    Learn More
Desc

1 Item

View as Grid List
per page
To Top