COMPLETE GEAR COMBO

COMPLETE GEAR COMBO

THESE PACKAGES INCLUDE ALL REQUIRED LANDING GEAR INSTALL COMPONENTS.

 

Desc

Items 1-9 of 64

View as Grid List
per page
  1. Dreamworks Ventrix Sport Jet Landing Gear Package
    $875.00
    Dreamworks Ventrix Sport Jet Landing Gear Package

    Dreamworks Ventrix Sport Jet Landing Gear Package

    • Full Pro-Link Electric Retract/Brake Landing Gear Package
    Learn More
  2. Pro-Link Xcalibur PLUS Electric Combo Basic
    $1,125.99
    Pro-Link Xcalibur PLUS Electric Combo Basic

    Pro-Link Xcalibur PLUS Electric Combo - Basic

    Dreamworks is pleased to present our Pro-Drive HL "Heavy Lift" electric retract systems. Over two years in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Our Pro-Drive HL series actuators are planetary gearing, providing outstanding torque and durability. The HL series offers 2.5 times more torque than our previous version actuators and transit time is only about 1.5 seconds longer. The larger planetary gearbox is practically bullet proof! We also offer two distinct versions of our electric gear system control module.

    The "Basic" system includes our durable T6 Hercules series retract frame and trunion, our Pro-Drive Hercules specific actuators and our feature packed "Basic" system control module.

    All Hercules Series Retracts are reversible!

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Xcalibur PLUS struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    BASIC Features:

    • Direct control of 3 motors in bidirectional and regulated mode up to 2,5A
    • Control of electric brake, fully proportional, brake deactivation when gear-up
    • Steering servo processor. Servo deactivation with gear-up activation
    • Small size and lightweight.

     

    Our Pro-Link "Xcalibur PLUS" Electric Combo Basic includes:

    • Pro-Link Xcalibur PLUS Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut
    • Pro-Link Hercules Series Machined Retract Set with 95° Nose
    • Pro-Drive Electric Brake Set
    • Pro-Link Basic Landing Gear Controller
    • 3 1/2" Main Wheels
    • 2 5/8" Nose Wheel
    • Steering Tiller
    • Dubro 4/40 Pull-Pull Kit
    • Three Male-Male Module to Rx Leads
    • Instruction Manual

    Nose Strut Specs:

    • Length: 5.75" / 146mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3oz

    Main Strut Specs:

    •     Length: 6.25" / 158.75mm (including the .75" step that enters Trunion)
    •     Wheel Sizing: 3.5" / 89mm (MAX)
    •     Attachment: 1/2" Trunion Lock
    •     Offset: .750"
    •     Axle: 1/4"
    •     Brake Flange: .50"
    •     Material: T-6 Aluminum
    •     Weight: 8.4oz (pair)

    Hercules Series Retract Specs:

    • Length - 4.25"
    • Frame Width - 1.13"
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 2.25" 
    • 90 Degree Main Extension - 95 Degree Nose
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • Reversible

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  3. Pro-Link Xcalibur PLUS Electric Combo Pro
    $1,165.99
    Pro-Link Xcalibur PLUS Electric Combo Pro

    Pro-Link Xcalibur PLUS Electric Combo - Pro

    Dreamworks is pleased to present our Pro-Drive HL "Heavy Lift" electric retract systems. Over two years in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Our Pro-Drive HL series actuators are planetary gearing, providing outstanding torque and durability. The HL series offers 2.5 times more torque than our previous version actuators and transit time is only about 1.5 seconds longer. The larger planetary gearbox is practically bullet proof! We also offer two distinct versions of our electric gear system control module.

    The "PRO" system includes our durable T6 Hercules series retract frame and trunion, our Pro-Drive Hercules specific actuators and our feature packed "PRO" system control module. Our PRO Control System offers a host of features over our "Basic" module.

    All Hercules Series Retracts are reversible!

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Xcalibur PLUS struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    PRO Features:

    -Control by Single channel (Gear operation and brake operation combined on single channel) or separate channels for gear and brake.

    -Control 3 landing gears. Programmable independent delay for each gear in UP and DOWN sequence.

    -Control of electric brake:

    •  Proportional and adjustable maximum brake force
    •  Continuous operation or pulsed mode for "ABS" effect, 10 levels of pulse ratio.
    •  Brake Limiter to set max brake force

    -Control of steering servo

    • Allow to use same channel as the rudder despite different center, independant travel gain and direction on steering servo from rudder servo. The steering servo center, travel and sense of movement can be adjusted.
    • The steering servo is centered and deactived during gear operation and gear UP phase.

    -Door control output:

    • 3 independent servo outputs for door control.
    • Each output can be programmed in 3 different positions (Gear UP, Gear Down and Gear Moving phase).
    • Servo Switch-off. Door servos can be deactivated after movement to prevent the posibility of servo burnout on a jammed door. Deactivation time can be programmed.

    -Manual mode:

    • Provides the ability cycle the gear manually for testing during setup phase, movement can be stopped and reasumed in any position.
    • Each drive motor can be independently run in any direction and stopping in any position for checking clearance, etc.

    -Motor Log:

    • Cycle counter for scheduled maintenance.

    -Easy setup:  All adjustments are done through a Xicoy data terminal.

    -Electronic switch for the main battery.

    Note:

    •  The unit can be programmed using the onboard LED and switch like our Basic controller (options limited using this program method)
    •  Data terminal for full programming not included. Compatible with all Xicoy SBus style data terminals used with Xicoy brand ECUS.

     

     

    Our Pro-Link "Xcalibur PLUS" Electric Combo Pro includes:

    • Pro-Link Xcalibur PLUS Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut
    • Pro-Link Hercules Series Machined Retract Set with 95° Nose
    • Pro-Drive Electric Brake Set
    • Pro-Link Pro Landing Gear Controller
    • 3 1/2" Main Wheels
    • 2 5/8" Nose Wheel
    • Steering Tiller
    • Dubro 4/40 Pull-Pull Kit
    • Three Male-Male Module to Rx Leads
    • Instruction Manual

    Nose Strut Specs:

    • Length: 5.75" / 146mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3oz

    Main Strut Specs:

    •     Length: 6.25" / 158.75mm (including the .75" step that enters Trunion)
    •     Wheel Sizing: 3.5" / 89mm (MAX)
    •     Attachment: 1/2" Trunion Lock
    •     Offset: .750"
    •     Axle: 1/4"
    •     Brake Flange: .50"
    •     Material: T-6 Aluminum
    •     Weight: 8.4oz (pair)

    Hercules Series Retract Specs:

    • Length - 4.25"
    • Frame Width - 1.13"
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 2.25" 
    • 90 Degree Main Extension - 95 Degree Nose
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • Reversible

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  4. Boomerang Turbinator V2 Combo
    $849.99
    Boomerang Turbinator V2 Combo

    Boomerang Jets Turbinator V2 - Standard Combo

    Our Boomerang Turbinator struts feature a brushed anodized finish, steel axle with locking nut.  There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    The Taurus series Machined T-6 aluminum retracts feature oversized high quality leak free cylinders, brass t-bar slider and heavy duty machined trunions with 1/2" clamp lock strut mounting make the Pro-Link series retracts the strongest, most reliable retracts on the market.

    Our Pro-Link "Boomerang Turbinator" Standard combo includes:

    • Pro-Link Turbinator Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut - Long Version
    • Pro-Link Taurus Series Machined Retract Set
    • 2 Standard Air Tanks
    • 2 Air Fill Valves
    • 3" Main Wheels and Brakes
    • 2 1/4" Nose Wheel
    • 3 Packs Heavy Duty Airline Tubing
    • Brake Line Tubing
    • 4 Airline Tee Fittings
    • 2 Air Gauges
    • Adjustable Rate Retract Valve
    • Ultra Precision UP-6 Brake Valve

    Nose Strut Specs:

    • Length: 6.25" / 158.75mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3.2oz

    Main Strut Specs:

    • Length: 6.625" / 168.2mm
    • Wheel Sizing: 3" on up
    • Attachment: 1/2" Trunion Lock
    • Offset: .0"
    • Axle: 1/4"
    • Brake Flange: .50
    • Material: T-6 Aluminum
    • Weight: 6.8oz (pair)

    Taurus Narrow Series Retract Specs:

    • Length - 4.25"
    • Frame Width - .88
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 1.75"
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • 90 Degree Extension
    • Reversible

     

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  5. Boomerang Turbinator V2 Combo Deluxe
    $949.99
    Boomerang Turbinator V2 Combo Deluxe

    Boomerang Jets Turbinator V2 - Deluxe Combo

    Our Turbinator struts feature a brushed anodized finish, steel axle with locking nut.  There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    The Taurus series Machined T-6 aluminum retracts feature oversized high quality leak free cylinders, brass t-bar slider and heavy duty machined trunions with 1/2" clamp lock strut mounting make the Pro-Link series retracts the strongest, most reliable retracts on the market.

    Our Pro-Link "Boomerang Turbinator" Deluxe combo includes:

    • Pro-Link Turbinator Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut - Long Version
    • Pro-Link Taurus Series Machined Retract Set
    • 2 Standard Air Tanks
    • 2 Air Fill Valves
    • 3" Main Wheels and Brakes
    • 2 1/4" Nose Wheel
    • 3 Packs Heavy Duty Airline Tubing
    • Brake Line Tubing
    • 4 Airline Tee Fittings
    • 2 Air Gauges
    • Electronic Dual Action Retract Valve
    • Electronic Single Action Brake Valve

    Nose Strut Specs:

    • Length: 6.25" / 158.75mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3.2oz

    Main Strut Specs:

    • Length: 6.625" / 168.2mm
    • Wheel Sizing: 3" on up
    • Attachment: 1/2" Trunion Lock
    • Offset: .0"
    • Axle: 1/4"
    • Brake Flange: .50
    • Material: T-6 Aluminum
    • Weight: 6.8oz (pair)

    Taurus Narrow Series Retract Specs:

    • Length - 4.25"
    • Frame Width - .88
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 1.75"
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • 90 Degree Extension
    • Reversible

     

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  6. Boomerang Turbinator V2 Electric Gear Combo Basic
    $984.99
    Boomerang Turbinator V2 Electric Gear Combo Basic

    Pro-Link Boomerang Turbinator - Electric Gear Combo - BASIC

    Dreamworks is pleased to present our Pro-Drive electric retract systems. Over a year in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Using our highly regarded Pro-Link retract units, we developed a strong and reliable drop-in electric drive actuator along with two distinct versions of our gear system control module.

    The "Basic" system includes our durable T6 Taurus series retract frame and trunion, our Pro-Drive Taurus specific actuators and our exceptional "Basic" system control module. Our Basic system offers 3 gear cycling, fully proportional electric brake control and steering servo control. Intuitive programming makes setup a breeze.

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Boomerang Turbinator V2 struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    Basic Features:

    • Direct control of 3 motors in bidirectional and regulated mode up to 2.5A
    • Control of Electric Brake, fully proportional, brake deactivaction when gear-up.
    • Steering servo processor.  Servo deactivation when gear-up.
    • Small size and lightweight.

     

     

    Our Pro-Link "Boomerang Turbinator V2" Electric Combo Basic includes:

    • Pro-Link Turbinator V2 Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut - Long Version
    • Pro-Drive Taurus Series Machined Electric Retract Set
    • Pro-Drive Electric Brake Set
    • Pro-Link Basic Landing Gear Controller
    • 3" Main Wheels
    • 2 1/4" Nose Wheel
    • Steering Tiller
    • Dubro 4/40 Pull-Pull Kit
    • Three Male-Male Module to Rx Leads
    • Instruction Manual

    Nose Strut Specs:

    • Length: 6.25" / 158.75mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3.2oz

    Main Strut Specs:

    • Length: 6.625" / 168.2mm
    • Wheel Sizing: 3" on up
    • Attachment: 1/2" Trunion Lock
    • Offset: .0"
    • Axle: 1/4"
    • Brake Flange: .50
    • Material: T-6 Aluminum
    • Weight: 6.8oz (pair)

    Taurus Narrow Series Retract Specs:

    • Length - 4.25"
    • Frame Width - .88
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 1.75"
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • 90 Degree Extension
    • Reversible

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  7. Boomerang Turbinator V2 Electric Gear Combo Pro
    $1,024.99
    Boomerang Turbinator V2 Electric Gear Combo Pro

    Pro-Link Boomerang Turbinator V2 - Electric Gear Combo - PRO

    Dreamworks is pleased to present our Pro-Drive electric retract systems. Over a year in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Using our highly regarded Pro-Link retract units, we developed a strong and reliable drop-in electric drive actuator along with two distinct versions of our gear system control module.

    The "PRO" system includes our durable T6 Taurus series retract frame and trunion, our Pro-Drive Taurus specific actuators and our feature packed "PRO" system control module. Our PRO Control System offers a host of features over our "Basic" module.

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Boomerang Turbinator struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    PRO Features:

    -Control by Single channel (Gear operation and brake operation combined on single channel) or separate channels for gear and brake.

    -Control 3 landing gears. Programmable independent delay for each gear in UP and DOWN sequence.

    -Control of electric brake:

    •  Proportional and adjustable maximum brake force
    •  Continuous operation or pulsed mode for "ABS" effect, 10 levels of pulse ratio.
    •  Brake Limiter to set max brake force

    -Control of steering servo

    • Allow to use same channel as the rudder despite different center, independant travel gain and direction on steering servo from rudder servo. The steering servo center, travel and sense of movement can be adjusted.
    • The steering servo is centered and deactived during gear operation and gear UP phase.

    -Door control output:

    • 3 independent servo outputs for door control.
    • Each output can be programmed in 3 different positions (Gear UP, Gear Down and Gear Moving phase).
    • Servo Switch-off. Door servos can be deactivated after movement to prevent the posibility of servo burnout on a jammed door. Deactivation time can be programmed.

    -Manual mode:

    • Provides the ability cycle the gear manually for testing during setup phase, movement can be stopped and reasumed in any position.
    • Each drive motor can be independently run in any direction and stopping in any position for checking clearance, etc.

    -Motor Log:

    • Cycle counter for scheduled maintenance.

    -Easy setup:  All adjustments are done through a Xicoy data terminal.

    -Electronic switch for the main battery.

    Note:

    •  The unit can be programmed using the onboard LED and switch like our Basic controller (options limited using this program method)
    •  Data terminal for full programming not included. Compatible with all Xicoy SBus style data terminals used with Xicoy brand ECUS.

     

    Our Pro-Link "Boomerang Turbinator V2" Electric Combo PRO includes:

    • Pro-Link Turbinator V2 Trailing Link Main Struts
    • Pro-Link Large Trailing Link Nose Strut - Long Version
    • Pro-Drive Taurus Series Machined Electric Retract Set
    • Pro-Drive Electric Brake Set
    • Pro-Link PRO Landing Gear Controller
    • 3" Main Wheels
    • 2 1/4" Nose Wheel
    • Steering Tiller
    • Dubro 4/40 Pull-Pull Kit
    • Three Male-Male Module to Rx Leads
    • Instruction Manual

    Nose Strut Specs:

    • Length: 6.25" / 158.75mm
    • Wheel Sizing: 2-5/8" / 66mm (MAX)
    • Attachment: 1/4" Pin - 1/2" Bushing
    • Offset: 1.5"
    • Axle: 3/16"
    • Material: T-6 Aluminum
    • Weight: 3oz

    Main Strut Specs:

    • Length: 6.625" / 168.2mm
    • Wheel Sizing: 3" on up
    • Attachment: 1/2" Trunion Lock
    • Offset: .0"
    • Axle: 1/4"
    • Brake Flange: .50
    • Material: T-6 Aluminum
    • Weight: 6.8oz (pair)

    Taurus Narrow Series Retract Specs:

    • Length - 4.25"
    • Frame Width - .88
    • Depth - 1.25"
    • Frame Rail mount length - 2.225"
    • Frame Rail Mount Width - 1.75"
    • 1/2" Steering Bushing with 1/4" Steering Pin
    • 90 Degree Extension
    • Reversible

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  8. Pro-Link Modellbau Tornado New V3/F86D Electric Gear Combo Pro
    $879.99
    Pro-Link Modellbau Tornado New V3/F86D Electric Gear Combo Pro

    Pro-Link Modellbau Tornado New V3/F86D Sabre Dog Electric Gear Combo - Pro

     Dreamworks is pleased to present our Pro-Drive electric retract systems. Over two years in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Using our highly regarded Pro-Link retract units, we developed a strong and reliable drop-in electric drive actuator along with two distinct versions of our gear system control module.

    The "PRO" system includes our durable T6 Sidewinder series retract frame and trunion, our Pro-Drive Sidewinder specific actuators and our feature packed "PRO" system control module. Our PRO Control System offers a host of features over our "Basic" module.

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Modellbau Tornado New V3/F86D Sabre Dog struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    PRO Features:

    -Control by Single channel (Gear operation and brake operation combined on single channel) or separate channels for gear and brake.

    -Control 3 landing gears. Programmable independent delay for each gear in UP and DOWN sequence.

    -Control of electric brake:

         Proportional and adjustable maximum brake force
         Continuous operation or pulsed mode for "ABS" effect, 10 levels of pulse ratio.
         Brake Limiter to set max brake force

    -Control of steering servo

        Allow to use same channel as the rudder despite different center, independant travel gain and direction on steering servo from rudder servo. The steering servo center, travel and sense of movement can be adjusted.
        The steering servo is centered and deactived during gear operation and gear UP phase.

    -Door control output:

        3 independent servo outputs for door control.
        Each output can be programmed in 3 different positions (Gear UP, Gear Down and Gear Moving phase).
        Servo Switch-off. Door servos can be deactivated after movement to prevent the posibility of servo burnout on a jammed door. Deactivation time can be programmed.

    -Manual mode:

        Provides the ability cycle the gear manually for testing during setup phase, movement can be stopped and reasumed in any position.
        Each drive motor can be independently run in any direction and stopping in any position for checking clearance, etc.

    -Motor Log:

        Cycle counter for scheduled maintenance.

    -Easy setup:  All adjustments are done through a Xicoy data terminal.

    -Electronic switch for the main battery.

    Note:

         The unit can be programmed using the onboard LED and switch like our Basic controller (options limited using this program method)
         Data terminal for full programming not included. Compatible with all Xicoy SBus style data terminals used with Xicoy brand ECUS.

    The Pro-Link Modellbau Tornado New V3/F86D Sabre Dog Electric Combo includes the following components:

    •         Pro-Link Tornado V3/F86 Trailing Link Main Struts
    •         Pro-Link Tornado V3/F86 Trailing Link Nose Strut
    •         Pro-Drive Sidewinder Series Machined Electric Retract Set
    •         Pro-Drive Electric Brake Set
    •         Pro-Link Pro Landing Gear Controller
    •         2 5/8" Main Wheels
    •         2 1/4" Nose Wheel
    •         Dubro 4/40 Pull-Pull Kit
    •         Three Male-Male Module to Rx Leads
    •         Instruction Manual 

      Nose Strut Specs:

    •         Length: 4.8" / 122mm
    •         Wheel Sizing: 2-1/4" / 57mm (MAX)
    •         Attachment: 1/4" Pin - 7/16" Bushing
    •         Offset: 1.5"
    •         Axle: 3/16"
    •         Material: T-6 Aluminum
    •         Weight: 1.8oz

    Main Strut Specs:

    •         Length: 5.25" / 133mm
    •         Wheel Sizing: 2.25" on up
    •         Attachment: 7/16" Trunion Lock
    •         Offset: .125"
    •         Axle: 3/16"
    •         Brake Flange: .375
    •         Material: T-6 Aluminum
    •         Weight: 4oz (pair)
       

    Sidewinder Electric Series Retract Specs:

    •     Length - 3.75"
    •     Frame Width - .85
    •     Depth - .95"
    •     Frame Rail mount length - 1.38"
    •     Frame Rail Mount Width - 1.63"
    •     90 Degree Extension
    •     7/16" Steering Bushing with 1/4" Steering Pin

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
  9. Pro-Link Modellbau Tornado New V3/F86D Electric Gear Combo Basic
    $829.99
    Pro-Link Modellbau Tornado New V3/F86D Electric Gear Combo Basic

    Pro-Link Modellbau Tornado New V3/F86D Sabre Dog Electric Gear Combo - Basic

     Dreamworks is pleased to present our Pro-Drive electric retract systems. Over two years in development, our new electric series retracts and control modules are the most advanced electric gear systems available. Using our highly regarded Pro-Link retract units, we developed a strong and reliable drop-in electric drive actuator along with two distinct versions of our gear system control module.

    The "Basic" system includes our durable T6 Sidewinder series retract frame and trunion, our Pro-Drive Sidewinder specific actuators and our exceptional "Basic" system control module. Our Basic system offers 3 gear cycling, fully proportional electric brake control and steering servo control. Intuitive programming makes setup a breeze.

    Eliminating the need for air tanks, tubing, valves and gauges, our Pro-Brake system requires only one wire lead per wheel. Since the Pro-Brake system uses magnetic field to create braking force, brake application is matched at each wheel. No longer do you have to deal with wheel pull or flat spotting!

    Our Tornado New V3/F86D Sabre Dog struts where developed from the ground up and feature a brushed anodized finish, steel axle with locking nut and over-sized machined shoulder bolt. There is no need to shim, bush, drill or machine your struts & axles in order to make them “fit”. There is also no more fear of wheels flying off during take-off or landings with the bullet-proof axle design. Although suited for grass field ops, our Trailing Link gear design proves to be invaluable for those occasional not-so-perfect landings on the tarmac as well.

    Basic Features:

    •     Direct control of 3 motors in bidirectional and regulated mode up to 2.5A
    •     Control of Electric Brake, fully proportional, brake deactivaction when gear-up.
    •     Steering servo processor.  Servo deactivation when gear-up.
    •     Small size and lightweight.
       

    The Pro-Link Modellbau Tornado New V3/F86D Sabre Dog Electric Combo includes the following components:

    •     Pro-Link Tornado V3/F86 Trailing Link Main Struts
    •     Pro-Link Tornado V3/F86 Trailing Link Nose Strut
    •     Pro-Drive Sidewinder Series Machined Electric Retract Set
    •     Pro-Drive Electric Brake Set
    •     Pro-Link Basic Landing Gear Controller
    •     2 5/8" Main Wheels
    •     2 1/4" Nose Wheel
    •     Dubro 4/40 Pull-Pull Kit
    •     Three Male-Male Module to Rx Leads
    •     Instruction Manual  

     Nose Strut Specs:

    •     Length: 4.8" / 122mm
    •     Wheel Sizing: 2-1/4" / 57mm (MAX)
    •     Attachment: 1/4" Pin - 7/16" Bushing
    •     Offset: 1.5"
    •     Axle: 3/16"
    •     Material: T-6 Aluminum
    •     Weight: 1.8oz

    Main Strut Specs:

    •     Length: 5.25" / 133mm
    •     Wheel Sizing: 2.25" on up
    •     Attachment: 7/16" Trunion Lock
    •     Offset: .125"
    •     Axle: 3/16"
    •     Brake Flange: .375
    •     Material: T-6 Aluminum
    •     Weight: 4oz (pair)

    Sidewinder Electric Series Retract Specs:

    •     Length - 3.75"
    •     Frame Width - .85
    •     Depth - .95"
    •     Frame Rail mount length - 1.38"
    •     Frame Rail Mount Width - 1.63"
    •     90 Degree Extension
    •     7/16" Steering Bushing with 1/4" Steering Pin

    Dont be fooled by imitations! When only the best will do, Go Pro-Link!

    Learn More
Desc

Items 1-9 of 64

View as Grid List
per page
To Top