Hanger 9 Models

Hanger 9 Models
Desc

Items 1-9 of 11

View as Grid List
per page
  1. Hanger 9 P3 Revolution 60cc ARF
    $649.99
    Hanger 9 P3 Revolution 60cc ARF

    Features:

        Designed by world class RC pilot, Mike McConville
        Exclusive, officially licensed P3 Revolution model
        Engineered to deliver 3D performance in a precision biplane platform
        Two-piece, plug-in wings with carbon-fiber joiner tube
        Two-piece, plug-in horizontal stabilizers with carbon-fiber joiner tube
        Laser-cut, all-wood construction that’s lightweight
        Pre-hinged ailerons and elevators (pre-drilled rudder)
        Genuine UltraCote® film finish with complex graphics applied
        Pre-drilled firewall that’s ready to mount your 60cc-size gas/petrol engine
        Color-matching fiberglass cowl and wheel pants
        Painted, high-strength aluminum landing gear
        Complete, high-quality hardware pack, plus fuel tank included
        Ball-link connectors and dual-plate fiberglass control horns
        Painted pilot figure included


    Overview:

    Product Training Video: https://youtu.be/nqzvj2Hmjs0


    The Hangar 9® P3 Revolution 60cc giant scale biplane is an exclusively licensed model of the radical new aircraft design for Skip Stewart Airshows. Like the full-size, the outline of the P3 Revolution 60cc is unconventional in practically every aspect. The actual aircraft Skip Stewart will fly in the very near future gets its lightweight specifications from advanced composite construction. World-class RC pilot, Mike McConville, has engineered this model using lightweight all-wood construction. It’s a level of durability that’s critical to hardcore 3D performance in this size class, plus it allows genuine UltraCote® film to deliver a finish that’s resilient as it is beautiful.

    One look at the enormous double-beveled control surfaces and it’s easy to tell this airplane was purpose built for outrageous 3D maneuverability. In contrast, the stretched fuselage and high-aspect ratio of its tapered wings suggests precision aerobatics is within the performance envelope. When matched with the recommended Spektrum electronics and 60cc-size gas engine, you can tune this unique biplane any way you like. You’ll get vertical pull to yank this big bipe out of a hover, and the precision to wail through crank-shaft rollers and hard snap in ways that would red-eye any pilot in the full-scale world.

    Convenience features like plug-in wings and stabilizers mean that getting the P3 Revolution to the field is no problem. Completed features like factory-hinged ailerons and elevators, a pre-drilled firewall, and a complete high-quality hardware package mean you won’t be at the work bench very long. Even a pilot figure with the likeness of Skip Stewart is included so you can experience the future of airshow aerobatics right at your home field.

    Exclusive License
    The P3 Revolution 60cc model is produced with an exclusive license by Skip Stewart Airshows and features the same complex graphics as the original with a Genuine UltraCote® film finish. To top it off, even the included pilot figure looks like Skip Stewart.

    Mike McConville Design
    World class RC pilot, Mike McConville designed this model to offer breakthrough performance to 3D pilots looking for the advantages an advanced biplane design can deliver.

    Plug-in Wings and Tail
    The two-piece, plug-in wings feature carbon-fiber joiner tubes and simple I-strut installation. The two-piece, plug-in horizontal stabilizers also have a carbon-fiber joiner tube and simply bolt to the fuselage side.

    Highly Pre-Fabricated
    The all-wood structure features lightweight laser-cut construction with locations for all the accessories already cutout. To further speed the assembly process, hinges for the aileron and elevators have been factory installed.

    Fiberglass Cowl and Wheel Pants
    The fiberglass cowl and wheel pants color match the vibrant trim scheme. The landing gear is fabricated from high-strength aluminum and also have a matching black paint finish.

    Complete Hardware Package
    The high-quality hardware pack features heavy-duty ball-link connectors and dual-plate fiberglass control horns that help make final pushrod adjustments simple. Even the fuel tank is included.


    Tech Notes:
    You will need...

    • 6+ Channel, full-range transmitter and receiver
    • 60–70cc 2-stroke gas/petrol engine
    • 7 × High torque servos
    • 2 × Standard servos
    • 3 × Batteries for radio and engine ignition
    • 4.5-Inch spinner
    • Propeller

    Specifications:

    • Wingspan: 78 in (1982mm)
    • Overall Length: 78.7 in (2000mm)
    • Wing Area: 1817 sq in (117.2 sq dm)
    • Flying Weight: 19 lbs (8.6kg)
    • Engine Size: 62cc Gas
    • Radio: 6 channel minimum
    • Servos: 7 high torque and 2 standard required
    • Trim Scheme Colors: Black, silver, true red
    • Spinner Size: 4.5 in (114mm)
    • Assembly Time: 20+Hours
    • Is Assembly Required: Yes
    • International customers please note: This kit is too large to ship via US Postal Service. We can only ship this kit via UPS, please review shipping charges using this method before finalizing the order.

      **Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

    Learn More
  2. Hanger 9 DHC-2 Beaver 30cc ARF
    $659.99
    Hanger 9 DHC-2 Beaver 30cc ARF

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

    •     Accurate scale outline and appearance
    •     Functional scale cockpit doors with spring-loaded latches
    •     Corrugated scale surface detail on the flight controls
    •     Instrument panel and seat details included
    •     High-quality wood construction with laser-cut parts
    •     Two-piece, plug-in wings and stabilizers with aluminum tube joiner
    •     Quick connect/disconnect struts simplify field assembly
    •     Painted aluminum landing gear with scale fiberglass fairings
    •     Scale color scheme finished with genuine UltraCote® covering
    •     Painted fiberglass cowl with scale dummy engine
    •     Ready to accept the recommended Evolution® 33GX gas engine
    •     Adjustable EP motor box included
    •     Preassembled fuel tank and complete high-quality hardware package included
    •     Functional flaps for enhanced flight characteristics and realism
    •     Ready to accept Hangar 9® 1/4-scale floats (HAN454512)—sold separately



    Overview:

    Primarily known as a “bush plane,” the de Havilland Beaver is distinguished for its ability to excel deep within territory where neither surface vehicle nor average pilot would venture lightly. The Hangar 9® DHC-2 Beaver 30cc ARF is built with the scale RC pilot in mind who wants a giant-scale model that’s as versatile as it is realistic. Its impressive stance begins with a huge 110-inch wingspan, but you’ll enjoy great performance using just a 30cc gas engine. Construction is an evolution of Hangar 9 tradition where only the best materials in balsa and plywood are selected for use with our modern processes, form assembly, tab alignment rigidity and laser-cut part accuracy. The result is an aircraft in final form that has sacrificed the least amount of scale authenticity to achieve the best appearance and most especially flight performance.

    Scale Outline
    The easy flying characteristics, plus the outstanding attention to scale detail and outline make the Hangar 9 DHC-2 Beaver 30cc an excellent model for first-time and expert giant-scale pilots alike.

    Excellent Low-speed Performance
    The operational flaps offer short field operation and are a popular for intermediate and expert pilots who want to replicate full-scale performance.

    Working Doors
    Both sides of the fuselage feature scale-shape doors that open wide to allow generous access to the interior where included scale details such as pilot seats and an instrument panel can be found. We recommend the Hangar 9 1/5-scale civilian pilot figure (HAN9119) for an accurate appearance in flight.

    Corrugated Control Surfaces
    Corrugated surface detail is factory applied to simulate the aluminum sheeting used on the full-size rudder, elevator, ailerons and flaps for control surface rigidity.

    Fiberglass Details
    The radial cowl and landing gear fairings are painted to match the Hangar 9 UltraCote® covering. The sculpted shape of the wing tips is also replicated in fiberglass.

    Two-piece Wing and Horizontal Stabilizer
    The two wing panels that make up the 110-inch wingspan slide on over an aluminum joiner tube and pin into the fuselage sides with rods and a nylon thumb-screw. Each airfoil shaped wing-strut adds to the structural support and secures in place with a quick-release mechanism. Each half of the horizontal stabilizer connects to the tail section with an aluminum joiner tube to provided support, assembly and storage options that make the DHC-2 easier to maintain and transport.

    Genuine UltraCote Finish
    The all-wood airframe of the Beaver is finished in genuine Hangar 9 UltraCote covering which is well known for its durable finish, brilliant looks and ease of maintenance.

    Optional Floats and Strut Set
    The DHC-2 Beaver 30cc can be converted into a float plane when you add the optional float strut set (HAN454512) and floats (HAN4580)—sold separately.

    Tech Notes
    You will need...

    Gas (Petrol) Setup
    - 6+ channel transmitter and receiver
    - (7) sport digital servos
    - Receiver pack
    - Engine
    - Ignition battery
    - Propeller
    - Battery charger

    Electric Setup
    - 6+ channel transmitter and receiver
    - (6) sport digital servos
    - Brushless outrunner motor
    - Speed controller
    - Flight battery
    - Receiver pack
    - Propeller
    - Battery charger

     

    Specifications:

    • Wingspan: 110 in (280 cm)
    • Overall Length: 66.0 in (168 cm)
    • Wing Area: 1485 sq. in. (95.8 sq. dm.)
    • Flying Weight: 16.5-17.25 lb (7.5-8.3 kg)
    • Engine Size: 30cc 2-stroke gas
    • Motor Size: Power 160
    • Radio: 5+ channel radio system
    • Trim Scheme Colors: UltraCote White (U870), True Red (U866), Black (U874)
    • CG (center of gravity): 3-3/8 to 4-1/8 in (86-105mm) behind leading edge of wing
    • Prop Size: 17 x 8 - 18 x 8
    • Spinner Size: 1 inch hub
    • Speed Control : 80-amp brushless
    • Recommended Battery: 37.0V 10S 5000mAh LiPo pack
    • Flaps: Yes
    • Retracts: No
    • Control Throw (Ailerons): Low: 5/8 in (16mm) up, 9/16 in (14mm) down, 10% expo; High: 13/16 in (21mm) up, 3/4 in (19mm) down, 10% expo
    • Control Throw (Elevator): Low: 13/16 in (21mm) up/down, 10% expo; High: 1 in (25mm) up/down, 10% expo
    • Control Throw (Rudder): Low: 1 in (25mm) right/left, 15% expo; High: 1-1/4 in (32mm) right/left, 15% expo
    • Control Throw (Flaps): Mid: 1-7/16 in (36mm); Full: 2-13/16 in (76mm)
    • Minimum Age Recommendation: 14 years
    • Experience Level: Intermediate
    • Recommended Environment: Outdoor
    • Assembly Time: 15-20 Hours
    • Is Assembly Required: Yes

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  3. Hanger 9 P-51D Mustang 60cc ARF (2 Boxes)
    $669.99
    Hanger 9 P-51D Mustang 60cc ARF (2 Boxes)

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

    •     True scale outline with accurate details
    •     3-piece, plug-in wing design with center-section landing gear support
    •     Two-piece, plug-in horizontal stabilizers
    •     Working inner gear doors, outer gear doors and tailwheel doors
    •     Easily accepts E-flite® P-51 giant-scale electric main and tail wheel retracts—sold separately
    •     Fiberglass chin cowl and scale exhaust detail
    •     Painted full-depth cockpit with sliding canopy
    •     Includes 2 sets of decals (Glamorous Glen III and Gentleman Jim)
    •     Includes wing pylons that accept the optional E-flite remote payload release system
    •     Complete high-quality hardware package featuring fiberglass control horns
    •     Optional bombs and drop tanks—sold separately
    •     Available 5-1/4" P-51 wheels with CNC aluminum hubs—sold separately
    •     Scale flaps for an authentic appearance


    Overview:

    The Hangar 9® P-51D Mustang 60cc ARF is a remarkable replica of America’s favorite warbird. Modeled after the Mustangs used by the 357th Fighter Squadron during WWII, it’s constructed in 1/5-scale with lightweight balsa and plywood featuring full balsa-sheeting to maintain a strict scale appearance that’s also durable. Very few details were sacrificed in order to maintain a high-level of performance. So you get a correctly located tail wheel and other outline characteristics in a way that makes modern scale modeling worth while. The functioning flaps facilitate scale takeoffs and landings while the internally mounted power switches help preserve the scale effect. One of the greatest convenience features is the three-piece wing, which features plug-in outer panels so that the center panel with the landing gear can stay attached to the fuselage—making assembly and transport super convenient. The airfoiled horizontal tail sections are removable as well.

    This P-51D Mustang comes out of the box with all kinds of details that have been finished for you, including a removable scale antenna, gun details, and much more. In addition, the inner gear doors have been fashioned to sequence in a scale manner using common components. The steerable tail wheel also features doors and a retractable electric tail wheel assembly (sold separately) that is a bolt-in option. Genuine UltraCote® covering delivers an easy to maintain finish that offers a realistically painted appearance similar to the way you’d see a professionally restored full-size P-51D today.

    Just about everything Hangar 9 product developers could think of has been done to make set up convenient. The included sliding canopy and full-depth cockpit is provided as inspiration for you to take the scale experience as far as you’d like. Plus, you get two sets of marking decals; “Glamorous Glen III” as flown by Captain Chuck Yeager and “Gentleman Jim” as flown by Captain Jim Browning for an extra sense of authenticity and realism you can match up with aircraft still flying to this day.

    Hangar 9 engineering excellence means you can count on great handling on the ground, in the air and during every hot strafing run in between. The P-51D Mustang 60cc can be powered for warbird performance using gas or electric power. This means you can enjoy what the Hangar 9 P-51D Mustang was truly meant for—blazing through the sky with authority just like the heroes of our past.

    Specifications:

    • Wingspan: 89.0 in (226 cm)
    • Overall Length: 77.5 in (197 cm)
    • Wing Area: 1420 sq. in. (96.1 sq. dm.)
    • Flying Weight: 26.0-28.5 lb (11.8-13.0 kg)
    • Engine Size: 50-60cc
    • Radio: 8+ channel radio system
    • Servos: (3) high-torque servos (flaps/rudder); (2) proportionial retract servos (main gear doors); (3) standard servos (ailerons, throttle); (2) mini servos (elevators)
    • Trim Scheme Colors: UltraCote Silver (U881), Black (U874), White (U870), Deep Red (U871), Olive Drab (U904), Cub Yellow (U884)
    • CG (center of gravity): 6.5-7.0 in (165-178mm) back from the leading edge at wing root
    • Wing Loading: 40.6-43.8 oz/sq ft
    • Prop Size: 22 x 8 to 24 x 10
    • Spinner Size: 5.50 in (140mm)
    • Recommended Battery: 6.6V 2S 2200mAh LiFe receiver battery
    • Flaps: Yes
    • Retracts: Required (not included)
    • Control Throw (Ailerons): Low: Up 0.59 in (15mm), Down 0.44 in (11mm) High: Up 0.88 in (22mm), Down 0.66 in (17mm)
    • Control Throw (Elevator): Low: Up 0.38 in (10mm), Down 0.38 in (10mm) High: Up 1.0 in (25mm), Down 1.0 in (25mm)
    • Control Throw (Rudder): Low: Left 1.19 in (30mm), Right 1.19 in (30mm) High: Left 2.16 in (55mm), Right 2.16 in (55mm)
    • Control Throw (Flaps): Mid flap 1.0 in (25mm), Landing flap 2.81 in (72mm)
    • Minimum Age Recommendation: 14 years
    • Experience Level: Advanced
    • Recommended Environment: Outdoor
    • Assembly Time: 20+Hours
    • Is Assembly Required: Yes

     

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • This Kit will ship via TRUCK (ground freight), and will require signature upon delivery.
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  4. Hanger 9 3.1m Sukhoi SU-26MM ARF (3 Boxes)
    $1,549.99
    Hanger 9 3.1m Sukhoi SU-26MM ARF (3 Boxes)

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    The world’s first world-class competitive Sukhoi.

    Features:

    •     The world’s first world-class competitive SU-26 model
    •     Double spar box wing construction
    •     Perfectly sized for a 150 – 170cc engine
    •     Flush fit factory painted fiberglass cowl, glassed and painted canopy hatch on fuselage
    •     Strong yet light weight balsa/plywood construction
    •     Carbon fiber wing and stab tubes
    •     Painted pilot and all hardware included
    •     Tuned pipe or canister exhaust ready
    •     Mike McConville signature trim scheme
    •     This model is one of the many available for the Phoenix RC Flight Simulator


    Overview:

    Hangar 9 is proud to introduce the Sukhoi SU-26MM 3.1m ARF: the first world-class competitive Sukhoi model. The Sukhoi SU-26MM 3.1m is a Pro-Class giant scale aerobatic model designed for IMAC competition and 3D pilots with class-leading performance. This new contest-proven precision and 3D aerobatic aircraft is the latest edition to the Hangar 9 product line.

    Designed by world-class competition pilot and designer Mike McConville, this Sukhoi SU-26MM 3.1m is constructed from durable, lightweight balsa and plywood and covered with an attention-getting UltraCote® trim scheme in purple, orange, and white. The visual appearance of this Sukhoi is finished off with a high quality, lightweight fiberglass cowling, canopy hatch and wheel pants.

    The Sukhoi SU-26MM 3.1m has low wing loading and excellent aileron authority enabling the plane to perform fast rolls and extreme 3D maneuvers. This aircraft is perfectly matched for high-powered performance with a 150-170cc engine for excellent vertical performance. The Sukhoi SU-26MM 3.1m comes out of the box with plug-in wings and pre-painted fiberglass cowl and wheel pants allow you to spend less time building and more time flying. Looking for a thrill? Look no further.

    Tech Notes:
    You will need...

    • 4 Channel minimum Radio System (Transmitter and Receiver)
    • Engine (Tuned Pipe and Canister optional)
    • Propeller
    • Spinner
    • 8 to 13 Ultra Torque Servos + 1 Standard servo for throttle
    • 2 Receiver packs (4000mAh recommended)
    • 1 Ignition pack (2000mAh recommended)
    • 4 JR MatchBox

    Specifications:

    • Wingspan: 122 in (3.1m)
    • Overall Length: 117 in (3.0m)
    • Wing Area: 2770 sq in (179 sq dm)
    • Flying Weight: 38.0 - 42.0 lb (17.2-19.1kg)
    • Engine Size: 150cc - 170cc Gas Engine
    • Radio: 4 channel radio system minimum
    • Servos: 9 to 14
    • Trim Scheme Colors: Cream (U878), Orange (U877), Pearl Purple (U847), Silver (U881)
    • Wing Loading: 33 oz/sq ft
    • Prop Size: 30-32 inch
    • Spinner Size: 5 inch
    • Recommended Battery: Two (2) 4000mAh receiver batteries
    • Flaps: No
    • Retracts: No
    • Control Throw (Ailerons): Low: 22°, 40% expo; High: 35°, 55% expo
    • Control Throw (Elevator): Low: 12°, 40% expo; High: 45°, 70% expo
    • Control Throw (Rudder): Low: 25°, 40% expo; High: 40°, 45% expo
    • Scale: 38%
    • Minimum Age Recommendation: 14 years
    • Experience Level: Advanced
    • Recommended Environment: Outdoor
    • Assembly Time: 20+Hours
    • Is Assembly Required: Yes

     

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • This Kit will ship via TRUCK (ground freight), and will require signature upon delivery.
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  5. Hanger 9 1/4 Scale PA-18 Super Cub PNP
    $1,199.99
    Hanger 9 1/4 Scale PA-18 Super Cub PNP

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

        Includes an Evolution® 33GX gas engine with muffler
        Spektrum™ digital aircraft servos installed
        Top quality balsa/light plywood construction
        Genuine Hangar 9® UltraCote® film covering
        Functional flaps
        Folding wing struts for easy transport
        Full-body pilot figure
        Functional cockpit door
        Realistic Super Cub wheels
        Functional, bungee-type suspension on main gear
        Scale, painted aluminum spinner
        Painted fiberglass cowl with molded panel lines
        Realistic instrument panel
        All hardware included
        Float ready (Hangar 9 ¼-scale Cub float kit-sold separately)


    Overview:

    Back country airstrips, remote mountain lakes, alpine glider ports - wherever adventure requires wings, chances are the Piper Super Cub is there. Since 1949 its rugged construction, impressive payload and marvelous short-field performance have made it a mainstay for bush pilots. Even now, over half a century later, it remains the plane of choice for many who follow the road less traveled.

    This beautiful, ¼-scale Plug-N-Play® version of the Super Cub has been expertly modeled in stunning detail. Almost every line and curve mirrors the real thing, right down to the shape of the fillet where the fuselage meets the vertical stab. Every control surface, including the flaps, features a metal-gear Spektrum™ digital servo so that setup is easy. The included Evolution® 33GX gas engine is ready to bolt into place with the provided in-cowl exhaust so you get reliability that offers power to spare.

    All you need to provide are the batteries, receiver and transmitter to enjoy great flight performance. Like the full-scale version, this model has functional flaps that give it amazing short-field takeoff and landing abilities. It also possesses the same easy-going flight characteristics, but will eagerly perform sport aerobatics, even when using the optional Hangar 9 floats.

    The ¼-Scale PA-18 Super Cub PNP is part of the complete line of top-quality Hangar 9® aircraft and accessories. All are engineered and crafted to exacting standards and feature the finest components and materials. Plus, every Hangar 9 product comes with the after-sale service and technical support you need to succeed.

    FOLDING WING STRUTS
    The accurately modeled wing struts fold up against the wing when disconnected for easy transport. Quick-connect strut pins are used so that no tools are needed for field assembly.

    SCALE LANDING GEAR WITH WORKING SUSPENSION
    This working recreation of the o-ring bungee landing gear used on the full-scale Super Cub will soak up bumps during ground operations just like the real thing.

    FUNCTIONAL FLAPS
    The functional flaps allow you to enjoy the same short-field takeoff and landing performance that full-scale Super Cub pilots do.

    PAINTED FIBERGLASS COWL AND ALUMINUM SPINNER
    Both the incredibly detailed cowl and scale-looking aluminum spinner come painted like you see here.

    WORKING, SPLIT-FOLD COCKPIT DOOR
    The magnetically secured cockpit door can be left open during flight, just like on the full-scale version. Through the lower cockpit door, the factory installed radio and ignition switches can be easily reached.

    BUILT-IN MOUNTS FOR OPTIONAL FLOAT KIT
    Hard points for mounting the Hangar 9 ¼-scale Cub float kit (sold separately) are already built into the fuselage.

    OPTIONAL FULL-DEPTH COCKPIT
    Your Super Cub will really stand out on the ramp when you add the optional full-depth cockpit (sold separately).

    OPTIONAL LED LIGHTS
    The model's wing and fuselage have been designed to make it easy to route the wiring for LED lights (sold separately). Clear light covers are also included.

     

    Tech Notes

    You will need...

    7+ channel, full-range transmitter and receiver radio system
    Receiver and ignition battery
    Charger for batteries

    Specifications:
     

    • Wingspan: 106 in (269 cm)
    • Overall Length: 68 in (173 cm)
    • Wing Area: 1630 sq. in. (150 sq. dm.)
    • Flying Weight: 16.6-18.5 lb (7.5-8.4 kg)
    • Engine Size: Evolution 33GX
    • Radio: 7+ channel radio system
    • Servos: Installed
    • Trim Scheme Colors: White, Deep Blue
    • CG (center of gravity): 4-4.75 in (102-121mm) back from the leading edge at wing root
    • Wing Loading: 23.0-26.0 oz, sq. ft.
    • Prop Size: 17x8
    • Spinner Size: 2.5-in (64mm)
    • Recommended Battery: 2700mAh 6.0V HiMH
    • Flaps: Yes
    • Experience Level: Intermediate
    • Assembly Time: 7-9 Hours
    • Is Assembly Required: Yes

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  6. Hanger 9 Cirrus SR22T 30cc
    $629.99
    Hanger 9 Cirrus SR22T 30cc

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

        Officially licensed
        Scale-inspired SR22T paint scheme
        Authentic scale outline and contours
        Fiberglass fuselage, all-wood wings, and foam-core stabilizer
        Shares the same solid handling and performance characteristics as the full size
        Removable right and left access doors and tinted windows installed
        Two-piece, plug-in wing with carbon fiber tube spar
        Authentic flap system and airfoil-shaped tail surfaces
        Fiberglass, flush mounted cowl and fiberglass wheel pants
        Includes scale aluminum spinner (optional three-blade spinner available)
        Includes installation options for gas and electric power


     

    Overview:

    A clear leader in modern civil airplane design, Cirrus® Aircraft creations are as stylish as they are advanced. Their modern engineering methods offer performance conventionally-built aircraft can't match, especially when combined with a premium level of comfort and functionality. The latest SR22T offers single-engine aircraft enthusiasts a contemporary and luxurious beauty true to its trend-setting heritage.

    The Hangar 9® Cirrus® SR22T 30cc ARF is a officially licensed, giant-scale reproduction of this aviation star. With the modern civilian scale RC pilot in mind, this stylish IMAA legal model matches every refined curve as well as the character of the full-size airplane perfectly. The fiberglass fuselage construction and fully balsa-sheeted wings and control surfaces deliver amazing flight characteristics that are both smooth and stable. Additional convenience features, including removable doors for easy internal access, factory-located hinges, slotted flaps, plus an aluminum spinner, contribute to its scale accuracy and modern appeal. Both the recommended 33cc gas engine and electric power system easily mount inside the cowling, plus the high-quality hardware package is complete so that you can enjoy a distinctive civilian aircraft flight experience as soon as possible.

    Tech Notes

    You will need...

    Gas Power
    - 6+ channel transmitter and receiver radio system
    - Gas engine
    - Propeller
    - 9 servos
    - Receiver battery
    - Ignition battery

    Electric Power
    - 6+ channel transmitter and receiver radio system
    - Receiver battery
    - 8 servos
    - Brushless outrunner motor
    - Speed controller
    - (2) 5S LiPo battery packs
    - Propeller

     

    Specifications

    • Wingspan: 96.8 in (246 cm)
    • Overall Length: 65.8 in (167 cm)
    • Motor Size: Power 160
    • CG (center of gravity): 2.83-3.15 in (72-80mm) back from the leading edge at wing root
    • Wing Loading: 39-45 oz/sq ft (119-137 g/sq dm)
    • Prop Size: 18 x 6 2-blade (26cc gas), 18 x 10 2-blade (EP)
    • Spinner Size: 3.0 in (76mm)
    • Speed Control : 80-amp brushless high-voltage ESC
    • Recommended Battery: 37.0V 10S (5S x2) 5000mAh LiPo
    • Flaps: Yes
    • Retracts: No
    • Control Throw (Ailerons): Low: 15mm up, 13mm down, 22% expo; High: 17mm up, 15mm down, 22% expo
    • Control Throw (Elevator): Low: 14mm up/down, 20% expo; High: 17mm up/down, 20% expo
    • Control Throw (Rudder): Low: 28mm right/left, 28% expo; High: 38mm right/left, 28% expo
    • Control Throw (Flaps): Mid: 30mm down; Full: 60mm down
    • Scale: 21%
    • Minimum Age Recommendation: 14 years
    • Experience Level: Intermediate
    • Recommended Environment: Outdoor
    • Assembly Time: 15-20 Hours
    • Is Assembly Required: Yes
    • Servos: 9 servos for gas, 8 for EP (2 are micro servos for elevator)
    • Flying Weight: 16.3-18.0 lb (7.4-8.2 kg)
    • Radio: 6+ channel radio system
    • Engine Size: 33cc 2-stroke gas
    • Wing Area: 930 sq. in. (60.0 sq. dm.)

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  7. Hanger 9 Valiant 30cc ARF
    $599.99
    Hanger 9 Valiant 30cc ARF

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

        Giant-scale versatility with an executive look
        Outstanding performance with a wide speed envelope
        Top quality balsa and plywood construction that’s strong and light
        Genuine Hangar 9® UltraCote® film covering
        Functional flaps that significantly expand the flight envelope
        Two-piece, plug-in cantilever wing
        Removable horizontal and vertical tail surfaces
        Finished fiberglass cowl and wheel pants in matching colors
        Painted aluminum landing gear
        Tinted windows and windshield
        Pre-drilled or pre-slotted control surface hinge locations
        Ready to mount the Evolution® 33GX gas engine
        Electric motor mount kit (sold separately) makes conversion easy
        Complete high-grade hardware package included
        Optional float kit and tundra-style landing gear (available)


    Overview:

    The Hangar 9® Valiant™ 30cc ARF airplane is everything you liked about the classic high-wing model that nursed you through your first solo flights and everything you wish it had when you became more experienced. By retaining the cabin-model looks, the friendly high-mounted wing design creates a natural stability, as does the stretched fuselage and over-sized tail surfaces. However, instead of a box with wings, handsome looks and fine details combine make this a versatile airplane with the finished appearance of an executive aircraft.

    Even more impressive is the sheer size of the Valiant and that it only needs a 30cc-class gas/petrol engine to deliver outstanding performance. Lightweight design, combined with high-grade balsa and plywood construction, is used with laser accuracy to provide everything you could want in a giant scale model. Its cantilever wing features two-piece, plug-in convenience along with a generous amount of flap area and large ailerons for crisp performance at a wide range of airspeeds. The elevator and rudder have been sized to offer sport performance with an extra "kick" as well.

    An Evolution® 33GX 33cc gas engine will easily mount completely enclosed inside the streamlined cowling. All combined, you’ll enjoy great performance and the power to add the optional floats. You can also exercise its STOL capability from just about any landing zone with the recommended Tundra-style landing gear setup (sold separately). If you’re looking for a big sport airplane that looks great and can do it all, the Valiant 30cc airplane will answer the call.

    The Valiant 30cc ARF is part of the complete line of top-quality Hangar 9® aircraft and accessories. All are engineered and crafted to exacting standards and feature the finest components and materials. Plus, every Hangar 9 product comes with the after-sale service and technical support you need to succeed.

    Plug-In Wings
    The cantilever wing is a two-piece, plug-in design featuring a large aluminum joiner tube for support without the need for complex external struts.

    Easy Assembly
    The locations for the hinges are pre-drilled or slotted, and pre-installed blind nuts are used wherever possible. The vertical and horizontal stabilizers are removable as a unit to ease transportation.

    Large Top Hatch
    Interior access through the cabin hatch reveals the simple nylon thumb-screw wing attachment points and helps make battery changes quicker.

    Float Ready
    Hard points are located in the fuselage so you can easily convert the Valiant™ 30cc to a seaplane using Hangar 9 ¼-scale floats-sold separately.

    Functional Flaps
    Operational flaps expand the flight envelope and shorten takeoff and landing distances. Each flap surface features independent servo control for deployment that’s precise and reliable.

    Fully Enclosed Engine
    The Evolution® 33GX gas engine mounts inside the sleek fiberglass cowling with almost no protrusions. The available Hangar 9 EP Mount Set (sold separately) makes electric conversion simple.

    Landing Gear Options
    The finished aluminum gear with fiberglass wheel pants completes the executive look. For increased rough-field durability, the optional Tundra setup features shock absorption and big 6-inch wheels.

    A Brilliant Finish
    The all-wood airframe is finished in genuine Hangar 9 UltraCote® film covering that’s long lasting and easy to maintain. The painted fiberglass cowl, wheel pants and aluminum landing gear feature matching paint that’s fuel proof.

    Tech Notes

    You will need...
    Internal Combustion
    - 6+ channel Transmitter and Receiver radio system
    - (8) standard digital servos
    - Receiver and ignition pack
    - Engine
    - Propeller
    - Engine kill switch
    - Spinner

    Electric Power
    - 6+ channel Transmitter and Receiver radio system
    - (7) standard digital servos
    - Motor
    - ESC
    - Propeller
    - Motor battery
    - EP mount set
    - Spinner


    Specifications:

    • Wingspan: 108.3 in (275 cm)
    • Overall Length: 78.2 in (199 cm)
    • Wing Area: 1663.0 sq. in. (107.3 sq. dm.)
    • Flying Weight: 16.5 - 17.5 lb ( 7.48 - 7.94 kg)
    • Engine Size: 33cc
    • Motor Size: Power 160
    • Radio: 6+ channel
    • Servos: Gas/Petrol: 8 servos EP: 7 servos
    • Trim Scheme Colors: White, Silver, True Red
    • CG (center of gravity): 4-1/8 - 4-3/4 in (105-121 mm) behind leading edge at wing root..
    • Wing Loading: 23-24 oz/sq ft.
    • Prop Size: Gas/Petrol: 17-18x8, EP: 18x10
    • Spinner Size: 3.25 in (83 mm)
    • Speed Control : 80A HV
    • Recommended Battery: EP: 37.0V 10S (5S x2) 5000mAh LiPo RX: 6.6V 2S 2200 - 3000mAh Li-Fe
    • Flaps: Yes
    • Control Throw (Ailerons): Low: 15/16 in Up, 13/16 in Down, High: 1-1/8 in Up, 15/16 in Down
    • Control Throw (Elevator): Low: 1-38 in Up and Down, High: 1-3/4 in Up and Down
    • Control Throw (Flaps): 3.0 in Full, 1-1/2 in Mid
    • Recommended Environment: Outdoor
    • Assembly Time: 15-20 Hours
    • Is Assembly Required: Yes
    • Is Assembly Required: Yes
    • Experience Level: Intermediate
    • Control Throw (Rudder): Low: 2-1/8 in Left and Right Hight: 2-3/4 in Left and Right

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  8. Hanger 9 F4U-1D Corsair 60cc ARF
    $999.99
    Hanger 9 F4U-1D Corsair 60cc ARF

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

    •     Superb flying characteristics, plus an accurate scale outline
    •     Convenient three-piece wing assembly with aluminum blade spar
    •     Pitot tube, guns and leading-edge stall strip details
    •     Functional three-panel flaps deploy using internal linkages
    •     Fiberglass wing center section
    •     Optional genuine Robart electric or pneumatic main and tail retracts and wheels
    •     Sliding clear canopy with painted frame and magnetic closure
    •     Full-depth cockpit and instrument panel included (pilot not included)
    •     Finished in genuine Hangar 9® UltraCote® covering
    •     Markings included offer four different squadron customization choices
    •     Fiberglass cowl features panel line and cowl flap detail
    •     Designed to fit a wide variety of 2- and 4-stroke engine options
    •     Radial dummy engine included
    •     Optional 5-inch aluminum wheels are available with a matching white powder-coat finish
    •     Hangar 9 steerable and retractable tail gear mounts easily into the scale location (HAN476024)
    •     Drop tanks, bombs and navigation lights available separately
    •     Ordnance pylons can be equipped with the optional E-flite servoless payload release mechanism (EFLA405)


    Overview:

    Designed to operate from aircraft carriers and/or land-based facilities, the F4U-1D Corsair was a force to be reckoned with to the Japanese during WWII. With its gull wing design, impressive looks and power, the Corsair was one of the most recognizable WWII aircraft.

    The Hangar 9® F4U-1D Corsair is a giant-scale masterpiece for 60cc power plants that delivers scale details worthy of being called competition grade. Its scale outline, impressive scale appearance, and Hangar 9 performance, make this an exciting warbird to show off at the field. The construction is primarily wood with fully balsa-sheeted areas, but the outer wing panels and control surfaces (except the three-panel flaps) feature exposed ribs like was done with the full-scale fighter. The three-piece wing features a robust fiberglass structure in the center which houses the custom main retracts built by Robart Mfg. (sold separately). A retractable tail wheel option is available from Hangar 9 as well as aluminum spoke wheels that set off this amazing model in an inspirational way.

    Out of the box, it comes finished in genuine UltraCote® covering, fiberglass cowling and wing center section that are painted to match. You also get scale details like a full depth cockpit, hidden tail and flap control linkages, scale rib detail, scale 3-panel flaps, dummy radial engine, sliding canopy and so much more. Optional scale accessories include scale tail wheel, main wheels and retracts that operate with pneumatic or electric mechanisms, droppable bombs or fuel tanks, scale 3-blade display prop and optional navigation lights. A wide range of choices are available for power; there’s the ease and economy of a 50–60cc two-stroke gas engine, sound and torque of a twin-cylinder 57cc four-stroke, or the realism of an Evolution 777 four-stroke radial. The hardware package included is very high-quality and complete as possible no matter power system you favor so you can get to flying this magnificent warbird quickly.

    Few World War II fighters inspired awe in both friend and foe like the F4U-1A Corsair. This impressive scale giant offers top gun scale looks, while delivering the Hangar 9 design reputation for superior flying performance.

    Specifications:

    • Wingspan: 85.5 in (217 cm)
    • Overall Length: 70.0 in (177 cm)
    • Wing Area: 1380 sq. in. (89.0 sq. dm.)
    • Flying Weight: 28.5-31.0 lb (12.9-14.0 kg)
    • Radio: 8-channel radio system minimum
    • Servos: (4) precision standard, (2) ultra torque standard, (2) standard servos
    • Trim Scheme Colors: UltraCote Corsair Blue (U905)
    • CG (center of gravity): 4.70-5.30 in (120-135mm) back from leading edge at wing root
    • Prop Size: 22 x 10 - 23 x 10
    • Spinner Size: 1-1/2 inch, Corsair style
    • Recommended Battery: 6.0V 2700mAh NiMH receiver pack (2)
    • Flaps: Yes
    • Retracts: Required (not included)
    • Control Throw (Ailerons): Low: 12mm up/down, 10% expo; High: 22mm up/down, 10% expo
    • Control Throw (Elevator): Low: 17mm up, 12mm down, 15% expo; High: 30mm up, 22mm down, 15% expo
    • Control Throw (Rudder): Low: 30mm right/left, 15% expo; High: 55mm right/left, 15% expo
    • Control Throw (Flaps): Mid: 30mm down; Landing: 70mm down
    • Minimum Age Recommendation: 14 years
    • Experience Level: Advanced
    • Recommended Environment: Outdoor
    • Assembly Time: 20+Hours
    • Is Assembly Required: Yes
    • Engine Size: 50-60cc 2-stroke gas; 57cc 4-stroke twin-cylinder gas; 77cc 7-cylinder 4-stroke glow radial

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
  9. Hanger 9 1/4 Scale PA-18 Super Cub
    $619.99
    Hanger 9 1/4 Scale PA-18 Super Cub

     Now Offering Free Shipping in the Continental U.S.!!!

    See Details Below

    Features:

    •     Functional, bungee-type suspension on main gear
    •     Functional flaps
    •     Folding wing struts for easy transport
    •     Full-body pilot figure included
    •     Functional cockpit door
    •     Realistic Super Cub wheels
    •     Scale, painted aluminum spinner
    •     Painted fiberglass cowl with molded panel lines
    •     Realistic instrument panel
    •     Float-ready—hard points for mounting the Hangar 9® ¼-scale Cub float kit (sold separately) are already built into the fuselage
    •     All hardware included


    Overview:

    Back country airstrips, remote mountain lakes, alpine glider ports – wherever adventure requires wings, chances are the Piper Super Cub is there. Introduced in 1949, its rugged construction, impressive payload and marvelous short-field performance quickly made it a mainstay of the bush flying fleet. Even now, over half a century later, it remains the plane of choice for many who follow the road less traveled.

    This beautiful, 1/4-scale ARF of the Super Cub has been expertly modeled in stunning detail. Almost every line and curve mirror the real thing, right down to the shape of the fillet where the fuselage meets the vertical stab. Other scale touches include functional bungee-type landing gear, a realistic instrument panel and a full-body pilot figure.

    This same attention to detail has been applied to the flight performance. Like the full-scale version, the model has functional flaps that give it amazing short-field takeoff and landing abilities. It also possesses the same easy-going flight characteristics, but will eagerly perform sport aerobatics using any of the recommended power choices.

    Tech Notes

    You will need...

    Internal Combustion
    - 5+ channel transmitter and receiver radio system
    - (8) standard digital servos
    - Receiver pack
    - Engine
    - Propeller

    Electric Power
    - 5+ channel transmitter and receiver radio system
    - (7) standard digital servos
    - Motor
    - ESC
    - Propeller
    - Motor battery

     

    Specifications:

    • Wingspan: 106 in (269 cm)
    • Overall Length: 68.0 in (173 cm)
    • Wing Area: 1630 sq in (150 sq dm)
    • Flying Weight: 16.5–18.5 lb (7.5–8.4 kg)
    • Engine Size: 1.20–1.60 2-stroke glow; 1.20–1.80 4-stroke glow; 20–26cc 2-stroke gas; 30cc 4-stroke gas
    • Motor Size: Power 110
    • Radio: 5-channel radio system minimum
    • Servos: 8 standard servos (7 for EP)
    • Trim Scheme Colors: UltraCote White (U870), Deep Blue (U873)
    • CG (center of gravity): 4-4.75 in (102-121mm) back from the leading edge at wing root
    • Wing Loading: 23.5-26.2 oz/sq ft
    • Prop Size: 16 to 18 in
    • Spinner Size: 2.5 in painted CNC spinner (included)
    • Recommended Battery: 8S or 9S 5000mAh Li-Po pack (4S + 5S in series)
    • Flaps: Yes
    • Retracts: No
    • Control Throw (Ailerons): Low: 3/4 in (19mm) up, 9/16 in (14mm) down; High: 1 in (25mm) up, 7/8 in (21mm) down; 20-25% expo
    • Control Throw (Elevator): Low: 1-5/16 (33mm) up/down; High: 1-3/4 in (45mm) up/down; 20-25% expo
    • Control Throw (Rudder): Low: 1-3/4 in (45mm) right/left; High: 2-3/8 in (60mm) right/left; 25-30% expo
    • Control Throw (Flaps): Mid/takeoff: 1-1/8 in (29mm); Landing: 2-5/8 in (67mm)
    • Minimum Age Recommendation: 14 years
    • Experience Level: Intermediate
    • Recommended Environment: Outdoor
    • Assembly Time: 15-20 Hours
    • Is Assembly Required: Yes

    Important Note:

    • Free Shipping Applies to the Lower 48 U.S. only (No Alaska, Puerto Rico, etc.)
    • Customers in all other locations must contact us for an accurate Shipping Quote.
    • Some remote locations require lift-gate and subsequent fees for truck delivery.  We will contact you for further instruction should this occur.
    • Shipping boxes are Oversized.
    • Due to dimensional weight calculations, shipping quotes may vary and additional shipping charges may apply. Unable to ship to some countries, International customers must contact us for a shipping quote!

     

    Learn More
Desc

Items 1-9 of 11

View as Grid List
per page
To Top