POWER DISTRIBUTION SYSTEMS

Desc

Items 1-9 of 62

View as Grid List
per page
  1. Advanced Radio Smart Bus Extreme 3S with Pin Switch
    $260.00
    Advanced Radio Smart Bus Extreme 3S with Pin Switch

    Smart Bus extreme 3s unlocks your models potential.
    Proud to provide the first 3s capable power expander, now you can run use 3S batteries regulated to 8.4 volts giving you faster and more powerful servos, crisper response and perfect centring. Ensure both you and your model can handle this increase in power as it is not for the faint of heart, or those with slow reactions.

    Regulated voltage gives you precise, repeatable, results.
    It is hard to be the best with a model that changes. With our high powered 260A regulators we remove the change and give you pure constant regulation. As batteries are used their voltage drops, changes in voltage mean changes in speed and power of your servos. Regulating ensures your model is the same time after time.


    The Next standard in servo Matching.
    In the Rc industry precision is key. How can you expect to be precise when no two servos are identical, giving you varied results no matter how well you mechanically match them. Match your servos across 15 individual points, with 8000 step resolution and you can finally achieve matched perfection on your elevators, flaps, multi-engines and more. Take the hassle out of your new setup and have a model that raises your skills.


    Sub-trim and reverse on all major outputs
    Ever spent hours, mechanically matching servos and never being able to get them just right or had to use a separate channel on your receiver, just to reverse a servo. With our intuitive and simple setup you can easily sub-trim at the centre and end-points of all your major outputs. Using Smart Bus you can individually reverse your servos at a touch of a button.


    12 inputs and 26 outputs.
    Looking at that next big project and wondering how you’re going to power all those servos, if you have enough channels on a receiver to power servos, retracts, flaps, brakes, ailerons, dual rudders, dual turbines or engines. With 26 outputs and up to 12 inputs, your system will always have more than enough outputs.


    Vibrant colour touch screen display.
    Gone are the days of fiddly buttons and frustrations, no more bind plugs and small screw drivers needed. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.


    Dual battery redundancy, power management you can trust.
    Ever wondered how many flights you have left before a charge, what about the health of your packs. Ensure that your model is safe and ready to fly with our dual battery redundancy technology. Using perfect diode technology, we link the batteries together, giving your model a powerful system capable of more flights before a recharge and with the addition of the Smart Screen you can directly monitor the voltage and milliamps used from you batteries. Models are expensive, ensure yours is in good condition to fly.


    Remote Switch, power at your fingertips.
    Imagine being able to power your model with the press of a button on a remote FOB. No more bending down, or removing a pin. No longer do you have to fiddle around with mechanical switches. With the optional AR remote Switch, powering your model is a breeze. By using the same technology that cars have for years. Our short range Remote Switch gives you a wireless key to power your model.

    SPECIFICATIONS:
    * Works with single or dual battery configuration.
    * Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD.
    * Smart Bus is capable of handling input voltages up to 12volts.
    * Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
    * 2 x 100 amp independent circuits.
    * Screen 2.4inch diagonal touch screen with 64k colour
    * Screen case dimensions 3.4 x 2.0 x 0.5 inches (86 x 50 x 12)mm
    * Smart Bus dimensions 4.2 x 3.0 x 0.9 inches (107 x 78 x 23)mm
    *Vibrant Colour touch Screen
    *Triple regulator design with dual power regulator 100A FETS or 260A FETS (Extreme 3S version).
    *Active regulator cooling for the most demanding applications.
    *Multi-match technology
    *Optional optical ignition

    Learn More
  2. XS Power 1700mAh LiFE Receiver Pack
    $31.95
    XS Power 1700mAh LiFE Receiver Pack

    XS Power 1700mAh LiFE Smart Balanced Receiver Pack

    XS Power LiFE packs. the perfect scale model battery and also ready for high current high energy manoeuvers.

    From the years of success with our Booma RC self balancing range of receiver batteries we are proud to announce the XS Power range of receiver packs. Battery chemistry design keeps progressing and so should you.

    Our new prism cell LiFeP04 packs offer much higher energy density and lower weight (lighter models fly better) but still remain a very safe chemistry to trust in your expensive model.

    Safe, More Power, Lighter and even easier to use. Demand the best out of your RX packs Demand XS-Power.

    With a 20C discharge rate, Advance Radio XS Power batteries are designed specifically for the growing demands of the RC market. The XS Power range packs a new punch, surpassing your RX and ECU needs.

    Lighter and thinner than previous packs, the XS Power range is easy to mount in any model. Don’t let the size fool you, XS Power Packs have a bigger capacity, giving you longer flight times with a thinner, lighter pack.

    Available in a wide range of sizes, the XS Power range covers packs from 1700mAh, 3400mAh, 2200mAh and 3800mAh. This large range of sizes offer maximum flexibility for a wide range of uses. Giving you the perfect battery for your model.

    High current means bigger wires and we have some of the best. The XS Power Range comes standard with 14AWG wire for high powered models and 20AWG with JR connector for charging and secondary powering.

    If you need to mount your packs deep inside the model, have a I-Charger or simply don't want the hassle of connecting a balance lead then you can choose the optional self balancing circuit. You then simply plug the cell balancing lead into the self balancing circuit and you are ready to go.

    Features:

    •      High C Rated packs
    •      Ultra safe chemistry
    •      Light weight
    •      Stardard with JST-XH plug
    •      Pre-soldered reciever plug w/ EC3 connectors
    •      Optional self balancing circuit or traditional balance lead.
    •      Trusted and proven quality

     

    Specification:

    Batteries For RX Battery

    Battery Discharge Rate:

    • 20C

    Battery Cells:

    • 2S 6.6V

    Battery Capacity:

    • 1700mAh

    Light Weight:

    • 95 g
    • 3.35 oz

    Dimensions:

    • 91 x 12 x 42mm
    • 3.58 x 0.47 x 1.65Inches
    Learn More
  3. XS Power 3800mAh 9.6volt LiFE ECU Pack MPX Connector
    $74.00
    XS Power 3800mAh 9.6volt LiFE ECU Pack MPX Connector

    XS Power LiFE packs. High current ready. 3800mAh - MPX

    Demand the best out of your RX and ECU packs Demand XS-Power.

    With a 20C discharge rate, Advance Radio XS Power batteries are designed specifically for the growing demands of the RC market. With a capable bust of 40C, The XS Power range packs a new punch, surpassing your RX and ECU needs.

    Lighter and thinner than previous packs, the XS Power range is easy to mount in any model. Don’t let the size fool you, XS Power Packs have a bigger capacity, giving you longer flight times with a thinner, lighter pack.

    Available in a wide range of sizes, the XS Power range covers packs from 1700mAh, 3400mAh, 2200mAh and 3800mAh. This large range of sizes offer maximum flexibility for a wide range of uses. Giving you the perfect battery for your model.

    High current means bigger wires and we have some of the best. The XS Power Range comes standard with 14AWG wire for high powered models and 20AWG for charging and secondary powering.

    Features:

                 -High C Rated packs
                 -Ultra safe chemistry
                 -Light weight
                 -Stardard with JST-XH plug
                 -pre-soldered reciever plug
                 -Trusted and proven quality

    Specification:

    Batteries For Turbine ECU Battery

    Battery Discharge Rate

    • 20/40C

    Battery Cells

    • 3S 9.9V

    Battery Capacity

    • 3800mAh

    Weight

    • 310g
    • 11.0oz

    Dimensions

    • 140 x 25 x 42mm
    • 5.5 x 1.0 x 1.65 inches
    Learn More
  4. Powerbox OLED-Display for PowerBox Mercury SRS Screen
    $70.00
    Powerbox OLED-Display for PowerBox Mercury SRS Screen

    Powerbox OLED-Display for PowerBox Mercury SRS

    • With Cable
    Learn More
  5. PowerBox Royal SRS minus GPS
    $710.00
    PowerBox Royal SRS minus GPS

    Description:

    Model 4720: PowerBox Royal SRS inc. iGyro, USB cable. Does not include GPS.

    Here at PowerBox Systems we have developed a new High-End product designed to provide supreme functionality and security for the demanding pilot.

    Current requirements obliged us to adopt many new ideas during the development period: these include the triple-axis iGyro as well as our new PowerBus technology which is destined to introduce fundamental changes in the electronic layout of large-scale models as a whole.

    In other respects we have retained proven concepts in further developed form. For example, the new Royal SRS is fully programmable using a menu system, controlled with the SensorSwitch and a blue backlit LCD screen; as usual, all battery-specific and flight-relevant data can be displayed on-screen after each flight.

    The door sequencer function and the internal iGyro both feature integral set-up assistants which make it possible to complete the essential set-up procedures in very short order.

    Over the last two years developments in serial receiver bus systems have brought them to the forefront of current technology and the new Royal SRS features these inputs.                        

    The Royal SRS features no fewer than four high-performance voltage regulators allowing the use of both HV servos and conventional 6 V types. With dual security in mind, each pair of regulators can be set to an output voltage of 5.9 V or 7.4 V.

    The Servo-Match and Fail-Safe functions have also been expanded: the software now provides adjustment facilities for all 24 outputs individually, covering servo centre, travels, fail-safe and hold-mode. Servo reverse is available with a single button-press.

    Five different radio control systems - Spektrum, Futaba, Multiplex, Hott and Jeti - can be bound to the Royal SRS, some providing telemetry output of battery-relevant data.

    The Royal SRS can be updated using the USB adapter and is therefore equipped to cope with new systems in the pipeline and possible future expansions.

    Features:

    •         Integral iGyro: triple-axis gyro system with heading function and set-up assistant
    •         Six independent gyro outputs for: 2 x ailerons, 2 x elevators, 2 x rudders
    •         GPS-regulated gyro gain
    •         Special regulatory algorithm for fixed-wing model aircraft
    •         Extremely accurate triple-axis MEMS sensor
    •         Integral Delta and V-tail mixer
    •         Door sequencer: six freely programmable outputs with set-up assistant
    •         PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
    •         Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
    •         SRS: Serial Receiver System provides the facility to use receivers with serial interface: Spektrum DSM2 and DSMX, Multiplex M-Link, Futaba S-Bus, HoTT, JR X-BUS and Jeti R-SAT2
    •         Unrestricted channel assignment for all 24 PowerBox outputs
    •         Graphic LCD screen with 128 x 64 pixels
    •         Extremely user-friendly menu-based programming using the SensorSwitch
    •         Up to 18 channels - depending on the radio control system in use
    •         Signal amplification and interference suppression for all 24 outputs
    •         Flight recorder, recording of lost frames, fail-safe events and all battery data
    •         Variable frame rate, range 9ms – 21ms
    •         Two 16-bit processors for fast, high-resolution signal processing
    •         2 x double-regulated output voltages for receivers and servos
    •         2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
    •         Connection facilities for Spektrum, HoTT and Multiplex MSB downlink bus systems
    •         Direct transmission of battery voltage and capacity to the transmitter
    •         Separate voltage and capacity display for each battery
    •         Minimum value memory alerts the user to voltage collapses
    •         Large-area heat-sinks for high regulator performance
    •         Regulator monitoring, regulator error indicator
    •         Support for three battery types: LiPo, NiMH / NiCd, LiFePo
    •         Suppression of any servo feedback currents which may occur
    •         Updateable with PowerBox Systems USB Interface connectors

    Technical Data:

        Operating voltage            4.0V - 9.0V
        Power supply      2S LiPo, 2S LiFePo, 5S NiCd/NiMH
        Current drain Power-on state       185mA (with LCD)

    •     Current drain Standby      30µA
    •     Maximum load current    Peak 4x20A
    •     Drop-out voltage              0.3V
    •     Output voltage   5.9V and/or 7.4V regulated
    •     Signal input         serial
    •     Supported RC systems     Spektrum, Futaba, HoTT, M-Link, Jeti, JR
    •     Receiver redundancy       SRS
    •     Channels              18
    •     Servo sockets     24
    •     Programmable servo outputs       24
    •     Servo signal resolution    0.5µs
    •     Signal frame rate              9ms, 12ms, 15ms, 18ms, 21ms
    •     Integral gyro system        iGyro
    •     Gyro regulation Heading- and Normalmode
    •     Gyro sensor type              MEMS
    •     Number of sensor axes   3
    •     Screen   LCD, backlite
    •     Integral door sequencer                yes
    •     Supported telemetry systems       Spektrum, HoTT, M-Link
    •     Dimensions         136 x 82 x 20 mm
    •     Weight 160g
    •     Weight Sensor Switch      15g
    •     Weight of LCD screen      65g
    •     Temperature range          -30°C bis +75°C

     

    Learn More
  6. PowerBox Mercury SRS without GPS
    $409.99
    PowerBox Mercury SRS without GPS

    PowerBox Mercury SRS Model 4120 with OLED-Display  - Does not include GPS.


    Features:

    •     Integral iGyro: Triple-axis gyro system with attitude assist function
    •     Expanded setup assistant for ultra-simple operation
    •     Special regulatory algorithm for fixed-wing model aircraft
    •     Six independent gyro outputs for: 2 x ailerons, 2 x elevators, 2 x rudders
    •     Special thrust vector support
    •     GPS-regulated gyro gain
    •     Extremely accurate six-axis MEMS sensor
    •     Integral Delta and V-tail mixer
    •     Door sequencer: freely programmable outputs with set-up assistant
    •     Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs


    Product description:

    The PowerBox Mercury SRS is a new power management system which combines all the experience and findings we have gained over the last few years, together with customer requests, in a single compact unit. Never before has so much functionality been crammed into such a small space! The Mercury SRS is ideal for any application requiring an airborne system which provides an uncompromising level of high performance. Integral iGyro, dual receiving system, telemetry, door sequencer and servo matching are just a few of the highlights which this small, lightweight device provides.

    In its development we paid particular attention to simplicity of operation. For example, the integral Assistant guides you through the entire basic setup procedure. Channel assignments and gyro settings are entered in just a few minutes with the help of the external OLED screen. Thanks to the new six-axis sensor, the unit learns its installed orientation when the owner simply raises or lowers the model's tail. The user enters the model type and desired method of working for the iGyro: for example, it is possible to select automatic torque roll, thrust vector control or various settings with and without attitude assist function.

    One highlight is the iGyro's new Test-fly Assistant: a combination of the iGyro 3e and the iGyro SRS reduces the in-flight setup procedure to a single rotary knob. Two or three passes suffice to complete the gyro adjustments, and the various flight phases can be called up by a switch, as previously defined using the Setup Assistant.

    As with the Royal SRS, an optional addition is the proven GPS II, which provides automatic gyro gain adjustment according to the model's airspeed.
     

    To ensure maximum security, two receivers (four satellites with Spektrum systems) can be connected to the installed SRS. Battery, receiver and GPS data are available for telemetry with virtually all radio control systems.

    An integral Assistant is also available for setting up the door sequencer. Any modeller who knows how tiresome the adjustment procedure can be with conventional door sequencers will be surprised how quick it can be to set up a retract system including four wheel doors; it takes just a few minutes.

    The servo match function is available for all outputs. This facility enables various functions - such as the left and right landing flaps - to be controlled using just one channel. It is also used to synchronise multiple servos operating on a single control surface. Incidentally, the servo output assignment is also pre-defined using the Setup Assistant. The assignment varies according to the model type you select; multiple outputs can be assigned per channel, and the system 'learns' the landing flap and throttle channels. The powerful 16-bit processor and the system's update facility guarantee a future-proof device; updates with new functions can be installed at any time using PowerBox Terminal or our BlueCom adapter. PowerBox pilots know: their systems always reflect the latest state of technology!


     
    Technical Data:

    • Operating voltage  4.0V - 9.0V
    • Power supply  2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
    • Current drain Power-on state  99mA (with OLED)
    • Current drain Standby  3µA
    • Maximum load current  Peak 2x20A
    • Drop-out voltage  0.3V
    • Output voltage  5.9V or 7.4V regulated
    • Signal input  serial
    • Supported RC systems  Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
    • Receiver redundancy  SRS
    • Channels  15 (18)
    • Servo sockets  15
    • Programmable servo outputs  15
    • Servo signal resolution  0.5µs
    • Signal frame rate  12ms, 15ms, 18ms, 21ms
    • Integral gyro system  iGyro
    • Gyro regulation  Attitude assist and Normalmode
    • Gyro sensor type  MEMS
    • Number of sensor axes  6
    • Screen  OLED
    • Integral door sequencer  yes
    • Supported telemetry systems  Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
    • Dimensions  93 x 67 x 19 mm
    • Weight  85g
    • Weight Sensor Switch  15g
    • Weight of LCD screen  15g
    • Temperature range  -30°C bis +75°C
    Learn More
  7. Jeti Central Box 400 Power Distribution Combo with R3/RSW Rx
    $695.00
    Jeti Central Box 400 Power Distribution Combo with R3/RSW Rx

    Jeti Central Box 400 Power Distribution Combo with R3/RSW Receivers (3)


    The Central Box 400 is fully programmable switchboard with two (2) independent, stabilized power voltage regulators (30A Continues/230A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Central Box 400 has a unique design that provides power management, servo assignment, telemetry data stream, and overload protection for each one of the servo outputs. The Central Box 400 can manage up to two batteries and fully supports the Jeti EX telemetry data stream. Up to two receivers with serial (PPM, EX Bus, UDI) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy. In addition the Central Box 400 has up to four (4) independent Ext1/Ext4 telemetry inputs and two (2) stabilized BEC outputs for additional electronic devices. For more safety, the Central Box 400 contains two switching regulators connected in parallel. The adjustable voltage at the BEC output is always the same as voltage supplied to the servos. Voltage for the servo can be adjusted from 5V to 8V in 0.1V steps.

    Power Management (Standard/Advanced)
    The power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box 400 is provided only from one battery, it can be connected via either battery (BATT1/2) inputs.

    In advance power setting you can independently adjust power input voltages. This way the battery with higher voltage can be used only as power battery backup and you can avoid constant charging and cycling both receiver battery packs.

    With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

    Included
    (1) Jeti Central Box 400
    (3) Jeti Duplex EX R3/RSW 2.4GHz Receiver
    (3) Servo Installation Bracket w/Screws
    (2) BEC Installation Bracket w/Screws
    (2) Multiplex Connector
    (1) Mini USB to USB PC Cable

    Data Recording & Download
    Central Box 400 is equipped with 8MB internal memory. The memory is used to store the telemetry data from the Central Box and from all connected sensors. The data log file uses standard FAT32 system, all files containing the telemetry data are located in the Log. directory. The telemetry recording starts automatically if the Central Box detects a receiver signal providing the information on Rx1 or Rx2 channels. The recording stops automatically when the Central Box is switched OFF.

    If you connect Central Box to the PC using the USB port. The PC detects Central Box as a mass storage device. After the Central Box is connected to the PC, it becomes inactive and can be used only for data reading.

    JetiBox Configuration
    The JetiBox monitor/programmer can be used for parameter setting and retrieving data. After connecting to the Central Box (Ext4), a startup screen appears that contains identification of the device in the first line of the JetiBox display. The second line contains the data showing the consumed capacity of batteries. By pushing the R button (to the right) on the JETIBOX, you get to the expander menu.

    Magnetic Switch (Optional)
    The magnetic switch is used to turn the Central Box ON/OFF and is connected to a separate slot labeled "Switch". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.

    Wireless Switch R3/RSW (Included)
    State-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON/OFF with simple flipping of the switch wirelessly from the Jeti DC/DS transmitters.

    Features:
    - Solid, CNC Cut Aluminum Case with Fully Integrated Voltage Regulators
    - Control Management with Full Individually Configurable Servo Outputs
    - Fully Redundant Power Management with Two Independent Battery Inputs
    - Two Independent Power Voltage Regulators (Transmitter Wirelessly Adjustable)
    - Firmware Updatable via USB Port
    - Jeti Duplex EX Bus, UDI or PPM Compatible
    - Wirelessly Programmable Using DC/DS Tx Device Explorer
    - Two Independent Programmable 15A Power Outputs (BEC1, BEC2)
    - Independent Receiver Signal Inputs (SAT1, SAT2)
    - Up to 24x Servo Outputs with Overload Protection
    - Up to 4x Telemetry Sensors Inputs (Ext1 - Ext4)
    - Input for Included Magnetic or R3/RSW Wireless Switch
    - Input Voltage: 6-17V (2S-4S)
    - Output Current: 30A Continues/230A Peak
    - Output Voltage: 5-8V (0.1V Steps)
    - Dimensions/Weight: 131mm x 88mm x 19mm/270g

     

    Fail-Safe Setting
    Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
    Jeti Central Box 400 Power Distribution Combo with R3/RSW Receivers (3)

    Servo Mapping
    Servo No. - Assigning outputs of the transmitter to the Central Box outputs.
    Group - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.

    Jeti Central Box 400 Power Distribution Combo with R3/RSW Receivers (3)

    Duplex Telemetry
    Temperature - Temperature of the Central Box
    Shorted Outputs No. - Number of Overloaded Outputs
    Voltage In - Voltage of Individual Outputs of the Central Box
    Current - Current Drawn from the Battery
    Capacity - Capacity Taken from the Batteries
    BEC Voltage - BEC Power Output Voltages (BEC1, BEC2)
    Output Voltage - Voltage Supplied to the Servos

    Jeti Central Box 400 Power Distribution Combo with R3/RSW Receivers (3)

    Telemetry Min/Max
    Clear Min/Max Switch - Place where you can assign a control (switch, stick or knob) on the DC/DS transmitter which clears the recorded data and minimum/maximum values.
    Clear Now - Allows you to immediately clear the recorded data and minimum/maximum values.

    Jeti Central Box 400 Power Distribution Combo with R3/RSW Receivers (3)

    Data Recording
    File Size - Size of the data file.
    Free Memory - Remaining empty space for data storage.
    Record Central Box telemetry - Enables/Disables telemetry data recording.
    Record Ext. Telemetry - Enables/Disables telemetry data recording from sensors connected to Ext1-4.
    Format the Internal Storage - Internal memory deletion.

    Learn More
  8. Powerbox MicroMatch
    $26.99
    Powerbox MicroMatch

    Product description

    The PowerBox MicroMatch is the ideal solution for models where there is no space for a PowerBox, or where the PowerBox in use does not include the MicroMatch’s functions.
    The MicroMatch provides a very simple method of fine-tuning the servo travels and centre positions of both outputs. Its main application is for systems where two servos operate a single control surface; the unit can match them electronically to run exactly in parallel. This prevents the servos counteracting each other, and allows the torque and speed of both servos to be exploited to the full. A further positive effect is a significant reduction in current drain and servo wear.

     

    The MicroMatch includes a servo reverse function which changes the direction of rotation of the servos with a single click. This is ideal for elevator servos which are installed as a mirror-image pair, allowing them to be operated using just one channel. Further applications are twin rudders or steerable nosewheels.
    All adjustments can be carried out using the USB interface (Jeti and MPX adapters can also be used) or a BlueCom adapter. The BlueCom option offers one very practical feature: it is possible to make direct adjustments at the servo output arm, and alter the settings conveniently using a mobile phone and a Bluetooth link!
    The MicroMatch includes an update facility, allowing for possible future expansions to the range of functions.


    Features

    •     Servo-match function on both outputs
    •     Servo reverse, accurate adjustment of centre and end-points
    •     Programmable using a telephone app (BlueCom) or a PC (USB)
    •     Quick reverse function
    •     16-bit processor for high-speed signal processing
    •     4096-step resolution to suit the latest generation of servos
    •     Interference suppression and signal amplifier function
    •     Ultra-high current capacity: limited only by the plug and socket connection
    •     Can be updated using BlueCom or the USB Interface Adapter


    Technical Data

    • Operating voltage  4.0V - 9.0V
    • Current drain Power-on state  22mA
    • Maximum load current  >10A
    • Signal input  PWM
    • Channels  1
    • Programmable servo outputs  2
    • Servo signal resolution  4096
    • Signal frame rate  12ms, 15ms, 18ms, 21ms
    • Dimensions  33 x 10 x 5.5 mm
    • Weight  7.5g
    • Temperature range  -30°C to +75°C
    Learn More
  9. PowerBox Mercury SRS
    $489.99
    PowerBox Mercury SRS

    PowerBox Mercury SRS


    Features:

    •     Integral iGyro: Triple-axis gyro system with attitude assist function
    •     Expanded setup assistant for ultra-simple operation
    •     Special regulatory algorithm for fixed-wing model aircraft
    •     Six independent gyro outputs for: 2 x ailerons, 2 x elevators, 2 x rudders
    •     Special thrust vector support
    •     GPS-regulated gyro gain
    •     Extremely accurate six-axis MEMS sensor
    •     Integral Delta and V-tail mixer
    •     Door sequencer: freely programmable outputs with set-up assistant
    •     Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs


    Product description:

    The PowerBox Mercury SRS is a new power management system which combines all the experience and findings we have gained over the last few years, together with customer requests, in a single compact unit. Never before has so much functionality been crammed into such a small space! The Mercury SRS is ideal for any application requiring an airborne system which provides an uncompromising level of high performance. Integral iGyro, dual receiving system, telemetry, door sequencer and servo matching are just a few of the highlights which this small, lightweight device provides.

    In its development we paid particular attention to simplicity of operation. For example, the integral Assistant guides you through the entire basic setup procedure. Channel assignments and gyro settings are entered in just a few minutes with the help of the external OLED screen. Thanks to the new six-axis sensor, the unit learns its installed orientation when the owner simply raises or lowers the model's tail. The user enters the model type and desired method of working for the iGyro: for example, it is possible to select automatic torque roll, thrust vector control or various settings with and without attitude assist function.

    One highlight is the iGyro's new Test-fly Assistant: a combination of the iGyro 3e and the iGyro SRS reduces the in-flight setup procedure to a single rotary knob. Two or three passes suffice to complete the gyro adjustments, and the various flight phases can be called up by a switch, as previously defined using the Setup Assistant.

    As with the Royal SRS, an optional addition is the proven GPS II, which provides automatic gyro gain adjustment according to the model's airspeed.
     

    To ensure maximum security, two receivers (four satellites with Spektrum systems) can be connected to the installed SRS. Battery, receiver and GPS data are available for telemetry with virtually all radio control systems.

    An integral Assistant is also available for setting up the door sequencer. Any modeller who knows how tiresome the adjustment procedure can be with conventional door sequencers will be surprised how quick it can be to set up a retract system including four wheel doors; it takes just a few minutes.

    The servo match function is available for all outputs. This facility enables various functions - such as the left and right landing flaps - to be controlled using just one channel. It is also used to synchronise multiple servos operating on a single control surface. Incidentally, the servo output assignment is also pre-defined using the Setup Assistant. The assignment varies according to the model type you select; multiple outputs can be assigned per channel, and the system 'learns' the landing flap and throttle channels. The powerful 16-bit processor and the system's update facility guarantee a future-proof device; updates with new functions can be installed at any time using PowerBox Terminal or our BlueCom adapter. PowerBox pilots know: their systems always reflect the latest state of technology!


     
    Technical Data:

    • Operating voltage  4.0V - 9.0V
    • Power supply  2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
    • Current drain Power-on state  99mA (with OLED)
    • Current drain Standby  3µA
    • Maximum load current  Peak 2x20A
    • Drop-out voltage  0.3V
    • Output voltage  5.9V or 7.4V regulated
    • Signal input  serial
    • Supported RC systems  Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
    • Receiver redundancy  SRS
    • Channels  15 (18)
    • Servo sockets  15
    • Programmable servo outputs  15
    • Servo signal resolution  0.5µs
    • Signal frame rate  12ms, 15ms, 18ms, 21ms
    • Integral gyro system  iGyro
    • Gyro regulation  Attitude assist and Normalmode
    • Gyro sensor type  MEMS
    • Number of sensor axes  6
    • Screen  OLED
    • Integral door sequencer  yes
    • Supported telemetry systems  Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
    • Dimensions  93 x 67 x 19 mm
    • Weight  85g
    • Weight Sensor Switch  15g
    • Weight of LCD screen  15g
    • Temperature range  -30°C bis +75°C
    Learn More
Desc

Items 1-9 of 62

View as Grid List
per page
To Top