BOOMA RC

BOOMA RC
Desc

5 Items

View as Grid List
per page
  1. Advanced Radio Smart Bus Extreme 3S with Pin Switch
    $260.00
    Advanced Radio Smart Bus Extreme 3S with Pin Switch

    Smart Bus extreme 3s unlocks your models potential.
    Proud to provide the first 3s capable power expander, now you can run use 3S batteries regulated to 8.4 volts giving you faster and more powerful servos, crisper response and perfect centring. Ensure both you and your model can handle this increase in power as it is not for the faint of heart, or those with slow reactions.

    Regulated voltage gives you precise, repeatable, results.
    It is hard to be the best with a model that changes. With our high powered 260A regulators we remove the change and give you pure constant regulation. As batteries are used their voltage drops, changes in voltage mean changes in speed and power of your servos. Regulating ensures your model is the same time after time.


    The Next standard in servo Matching.
    In the Rc industry precision is key. How can you expect to be precise when no two servos are identical, giving you varied results no matter how well you mechanically match them. Match your servos across 15 individual points, with 8000 step resolution and you can finally achieve matched perfection on your elevators, flaps, multi-engines and more. Take the hassle out of your new setup and have a model that raises your skills.


    Sub-trim and reverse on all major outputs
    Ever spent hours, mechanically matching servos and never being able to get them just right or had to use a separate channel on your receiver, just to reverse a servo. With our intuitive and simple setup you can easily sub-trim at the centre and end-points of all your major outputs. Using Smart Bus you can individually reverse your servos at a touch of a button.


    12 inputs and 26 outputs.
    Looking at that next big project and wondering how you’re going to power all those servos, if you have enough channels on a receiver to power servos, retracts, flaps, brakes, ailerons, dual rudders, dual turbines or engines. With 26 outputs and up to 12 inputs, your system will always have more than enough outputs.


    Vibrant colour touch screen display.
    Gone are the days of fiddly buttons and frustrations, no more bind plugs and small screw drivers needed. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.


    Dual battery redundancy, power management you can trust.
    Ever wondered how many flights you have left before a charge, what about the health of your packs. Ensure that your model is safe and ready to fly with our dual battery redundancy technology. Using perfect diode technology, we link the batteries together, giving your model a powerful system capable of more flights before a recharge and with the addition of the Smart Screen you can directly monitor the voltage and milliamps used from you batteries. Models are expensive, ensure yours is in good condition to fly.


    Remote Switch, power at your fingertips.
    Imagine being able to power your model with the press of a button on a remote FOB. No more bending down, or removing a pin. No longer do you have to fiddle around with mechanical switches. With the optional AR remote Switch, powering your model is a breeze. By using the same technology that cars have for years. Our short range Remote Switch gives you a wireless key to power your model.

    SPECIFICATIONS:
    * Works with single or dual battery configuration.
    * Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD.
    * Smart Bus is capable of handling input voltages up to 12volts.
    * Full Dual Battery Redundancy - If one battery fails the other battery takes full control.
    * 2 x 100 amp independent circuits.
    * Screen 2.4inch diagonal touch screen with 64k colour
    * Screen case dimensions 3.4 x 2.0 x 0.5 inches (86 x 50 x 12)mm
    * Smart Bus dimensions 4.2 x 3.0 x 0.9 inches (107 x 78 x 23)mm
    *Vibrant Colour touch Screen
    *Triple regulator design with dual power regulator 100A FETS or 260A FETS (Extreme 3S version).
    *Active regulator cooling for the most demanding applications.
    *Multi-match technology
    *Optional optical ignition

    Learn More
  2. XS Power 1700mAh LiFE Receiver Pack
    $31.95
    XS Power 1700mAh LiFE Receiver Pack

    XS Power 1700mAh LiFE Smart Balanced Receiver Pack

    XS Power LiFE packs. the perfect scale model battery and also ready for high current high energy manoeuvers.

    From the years of success with our Booma RC self balancing range of receiver batteries we are proud to announce the XS Power range of receiver packs. Battery chemistry design keeps progressing and so should you.

    Our new prism cell LiFeP04 packs offer much higher energy density and lower weight (lighter models fly better) but still remain a very safe chemistry to trust in your expensive model.

    Safe, More Power, Lighter and even easier to use. Demand the best out of your RX packs Demand XS-Power.

    With a 20C discharge rate, Advance Radio XS Power batteries are designed specifically for the growing demands of the RC market. The XS Power range packs a new punch, surpassing your RX and ECU needs.

    Lighter and thinner than previous packs, the XS Power range is easy to mount in any model. Don’t let the size fool you, XS Power Packs have a bigger capacity, giving you longer flight times with a thinner, lighter pack.

    Available in a wide range of sizes, the XS Power range covers packs from 1700mAh, 3400mAh, 2200mAh and 3800mAh. This large range of sizes offer maximum flexibility for a wide range of uses. Giving you the perfect battery for your model.

    High current means bigger wires and we have some of the best. The XS Power Range comes standard with 14AWG wire for high powered models and 20AWG with JR connector for charging and secondary powering.

    If you need to mount your packs deep inside the model, have a I-Charger or simply don't want the hassle of connecting a balance lead then you can choose the optional self balancing circuit. You then simply plug the cell balancing lead into the self balancing circuit and you are ready to go.

    Features:

    •      High C Rated packs
    •      Ultra safe chemistry
    •      Light weight
    •      Stardard with JST-XH plug
    •      Pre-soldered reciever plug w/ EC3 connectors
    •      Optional self balancing circuit or traditional balance lead.
    •      Trusted and proven quality

     

    Specification:

    Batteries For RX Battery

    Battery Discharge Rate:

    • 20C

    Battery Cells:

    • 2S 6.6V

    Battery Capacity:

    • 1700mAh

    Light Weight:

    • 95 g
    • 3.35 oz

    Dimensions:

    • 91 x 12 x 42mm
    • 3.58 x 0.47 x 1.65Inches
    Learn More
  3. XS Power 3800mAh 9.6volt LiFE ECU Pack MPX Connector
    $74.00
    XS Power 3800mAh 9.6volt LiFE ECU Pack MPX Connector

    XS Power LiFE packs. High current ready. 3800mAh - MPX

    Demand the best out of your RX and ECU packs Demand XS-Power.

    With a 20C discharge rate, Advance Radio XS Power batteries are designed specifically for the growing demands of the RC market. With a capable bust of 40C, The XS Power range packs a new punch, surpassing your RX and ECU needs.

    Lighter and thinner than previous packs, the XS Power range is easy to mount in any model. Don’t let the size fool you, XS Power Packs have a bigger capacity, giving you longer flight times with a thinner, lighter pack.

    Available in a wide range of sizes, the XS Power range covers packs from 1700mAh, 3400mAh, 2200mAh and 3800mAh. This large range of sizes offer maximum flexibility for a wide range of uses. Giving you the perfect battery for your model.

    High current means bigger wires and we have some of the best. The XS Power Range comes standard with 14AWG wire for high powered models and 20AWG for charging and secondary powering.

    Features:

                 -High C Rated packs
                 -Ultra safe chemistry
                 -Light weight
                 -Stardard with JST-XH plug
                 -pre-soldered reciever plug
                 -Trusted and proven quality

    Specification:

    Batteries For Turbine ECU Battery

    Battery Discharge Rate

    • 20/40C

    Battery Cells

    • 3S 9.9V

    Battery Capacity

    • 3800mAh

    Weight

    • 310g
    • 11.0oz

    Dimensions

    • 140 x 25 x 42mm
    • 5.5 x 1.0 x 1.65 inches
    Learn More
  4. Advanced Radio AR1232 Power Bus Distribution System
    $179.00
    Advanced Radio AR1232 Power Bus Distribution System

    Welcome to the Advanced Radio AR1232 Power Bus distribution system. - XT60

    We were approached by many RC pilots and asked if we would could produce a high quality low cost Power Distribution system. We took a great deal of input from our advisors and came up what we see as a first in power distribution systems at an affordable price. Simple usability and style in design played important roles in the final product and we believe the specification is one of the best in the industry for it's class. Many thanks to all our contributors.

    Here are the details.

    12 Inputs and 32 Outputs - The AR1232 is a high quality power distribution system featuring 12 input channels and 32 output channels. Simply connect your receiver (up to 12 Channels) to the AR1232 and you have immediate access to 32 fully buffered output channels capable of driving long cable lengths for up to 32 servos.

    Intelligent Battery Management System (IBMS) - AR1232 also features our unique IBMS technology. With IBMS, dual receiver batteries are monitored 100% of the time and are balanced as they are used so you get the highest output power from both batteries all the time. IBMS monitors each battery with zero voltage drop so you get no parasite energy wasted in heat giving you the optimum power from your battery packs all the time. IBMS also features Battery Backup and fail safe. In the case of a battery failing it will be switched out of circuit and then the other battery takes over to bring your prized model home.

    3 High Bright Blue Indicator LEDs -  The AR1232 features 3 high bright blue LEDs to give clear feedback of regulated receiver power and battery performance. The LED mounted at the inputs shows 5volt receiver activity while the LEDS at the Battery connection end show the status of each battery usage. If a battery LED is glowing then the battery is supplying power.

    Regulated Receiver Voltage - AR1232 comes with a separate 2 amp 5 volt regulated input bus for the receiver power while the main Output Power Bus sees the full voltage of your selected batteries.

    All Battery Chemistries - AR1232 was designed to accommodate all types of servos from low voltage to todays modern high voltage servos. The type of servos used depends on the selected battery chemistry. AR1232 is suitable with all battery chemistries like (Nicd, NiMh, LiFe, Lion, LiPo). See battery details below.

    Choice of Fail Safe Switching - AR1232 comes ready to use with the optional Advanced Radio Pin Flag switch/remote LED pack. AR1232 can also be used with any other mechanical or electronic switching system like our Intelliswitch, or Wallaby switch.

    Stylish Design - The stylish design of the AR1232 allows you to mount your receiver either on the top plate of the AR123 or remotely elsewhere in your model.

    Choice of Power Connectors - The AR1232 can be tailored to suit your requirements with a choice of three industry standard power connectors.

    Supplied with all the female to female conncting cables to connect to your receiver.

    100% Compatible with the Advanced Radio Intellimatch automatic servo matching system.

    Read on for the full list of features.

    See PDF below for Manual.

    AR1232 Power Bus  Features:
    - 12 Input Channels & 32 output channels
    - 2 x independent Intelligent Battery Matching  System (IBMS).
    - Dual LED indication for each battery.
    - Recommended battery chemistry
        Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),
        Nimh(5 cells).
    - Maximum input voltage 10 volts.
    - Minimum input voltage 5 volts.
    - Max continuous current across 32 outputs:
        2 x 10 Amp (20 Amp), 
        2 x 15 Amp (30 Amp for 15 sec),
    - Max instantaneous current 2 x 20 Amp.
    - 5 volt 2amp regulator for Receiver supply.
    - Weight 72 grams.
    - Length 90 mm x width 64 mm x Height 17.3 mm
    - Designed to work with Intellegent Servo Matching System ISMS TM


    Intelligent Servo Matching Accessories:
    If you are building a scale model that uses multiple servos to control surfaces then consider adding our Intellimatch TM Automatic servo matching system to your Power Bus AR1232.

    Video of Intellimatch with the AR Power Bus system.

    Here are some model examples:

    Model Example 1 - 100cc Scale Aero Model:
    2 Aileron Servos per aileron
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories
    2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

    Model Example 2 - 150cc Scale Aero Model:
    3 Aileron Servos per aileron
    2 Elevator Servo per elevator
    3 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = 1 x IM22 for Elevators
    2 x IM14 = for Ailerons
    1 x IM14 = for Rudder

    Model Example 3  - Large Jet:
    2 Aileron Servos per aileron
    2 Flap Servos
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = for right side Ailerons and Flaps
    1 x IM22 = for left side Ailerons and Flaps
    1 x IM22 = for Rudder

    Model Example 4  - Giant Scale Glider:
    2 Aileron Servos per aileron
    2 Flap Servos
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = for right side Ailerons and Flaps
    1 x IM22 = for left side Ailerons and Flaps
    1 x IM22 = for Rudder

    Learn More
  5. Advanced Radio AR824 Power Bus Distribution System
    $159.00
    Advanced Radio AR824 Power Bus Distribution System

    Welcome to the Advanced Radio AR824 Power Bus distribution system. - XT60

    We were approached by many RC pilots and asked if we would could produce a high quality low cost Power Distribution system. We took a great deal of input from our advisors and came up what we see as a first in power distribution systems at an affordable price. Simple usability and style in design played important roles in the final product and we believe the specification is one of the best in the industry for it's class. Many thanks to all our contributors.

    Here are the details.

    8 Inputs and 24 Outputs - The AR824 is a high quality power distribution system featuring 8 input channels and 24 output channels. Simply connect your receiver (up to 8 Channels) to the AR832 and you have immediate access to 24 fully buffered output channels capable of driving long cable lengths for up to 24 servos.

    Intelligent Battery Management System (IBMS) - AR824 also features our unique IBMS technology. With IBMS, dual receiver batteries are monitored 100% of the time and are balanced as they are used so you get the highest output power from both batteries all the time. IBMS monitors each battery with zero voltage drop so you get no parasite energy wasted in heat giving you the optimum power from your battery packs all the time. IBMS also features Battery Backup and fail safe. In the case of a battery failing it will be switched out of circuit and then the other battery takes over to bring your prized model home.

    3 High Bright Blue Indicator LEDs -  The AR824 features 3 high bright blue LEDs to give clear feedback of regulated receiver power and battery performance. The LED mounted at the inputs shows 5volt receiver activity while the LEDS at the Battery connection end show the status of each battery usage. If a battery LED is glowing then the battery is supplying power.

    Regulated Receiver Voltage - AR824 comes with a separate 2 amp 5 volt regulated input bus for the receiver power while the main Output Power Bus sees the full voltage of your selected batteries.

    All Battery Chemistries - AR824 was designed to accommodate all types of servos from low voltage to todays modern high voltage servos. The type of servos used depends on the selected battery chemistry. AR824 is suitable with all battery chemistries like (Nicd, NiMh, LiFe, Lion, LiPo). See battery details below.

    Choice of Fail Safe Switching - AR824 comes ready to use with the optional Advanced Radio Pin Flag switch/remote LED pack. AR824 can also be used with any other mechanical or electronic switching system like our Intelliswitch, or Wallaby II switches.

    Stylish Design - The stylish design of the AR824 allows you to mount your receiver either on the top plate of the AR824 or remotely elsewhere in your model.

    Choice of Power Connectors - The AR824 can be tailored to suit your requirements with a choice of three industry standard power connectors.

    Supplied with all the female to female conncting cables to connect to your receiver.

    100% Compatible with the Advanced Radio Intellimatch Automatic Servo Matching System.

    Read on for the full list of features.

    See PDF Below for Manual.

    AR824 Power Bus  Features:

    - 8 Input Channels & 24 output channels
    - 2 x independent Intelligent Battery Matching  System (IBMS).
    - Dual LED indication for each battery.
    - Recommended battery chemistry
        Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),
        Nimh(5 cells).
    - Maximum input voltage 10 volts.
    - Minimum input voltage 5 volts.
    - Max continuous current across 32 outputs:
        2 x 10 Amp (20 Amp), 
        2 x 15 Amp (30 Amp for 15 sec),
    - Max instantaneous current 2 x 20 Amp.
    - 5 volt 2amp regulator for Receiver supply.
    - Weight 62 grams.
    - Length 75 mm x width 64 mm x Height 17.3 mm
    - Designed to work with Intellegent Servo Matching System ISMS TM

    Intelligent Servo Matching Accessories:
    If you are building a scale model that uses multiple servos to control surfaces then consider adding our Intellimatch TM Automatic servo matching system to your Power Bus AR824.

    Video of Intellimatch with the AR Power Bus system.

     

    Here are some examples:

    Model Example 1 - 100cc Scale Aero Model:
    2 Aileron Servos per aileron
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories
    2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

    Model Example 2 - 150cc Scale Aero Model:
    3 Aileron Servos per aileron
    2 Elevator Servo per elevator
    3 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = 1 x IM22 for Elevators
    2 x IM14 = for Ailerons
    1 x IM14 = for Rudder

    Model Example 3  - Large Jet:
    2 Aileron Servos per aileron
    2 Flap Servos
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = for right side Ailerons and Flaps
    1 x IM22 = for left side Ailerons and Flaps
    1 x IM22 = for Rudder

    Model Example 4  - Giant Scale Glider:
    2 Aileron Servos per aileron
    2 Flap Servos
    1 Elevator Servo per elevator
    2 Rudder servos
    Suggested Power Bus Intellimatch Accessories:
    1 x IM22 = for right side Ailerons and Flaps
    1 x IM22 = for left side Ailerons and Flaps
    1 x IM22 = for Rudder

     

    Learn More
Desc

5 Items

View as Grid List
per page
To Top