BATTERY ACCESSORIES

BATTERY ACCESSORIES

Volt Meters - Load Testers - Dischargers - Charge Leads

Desc

Items 1-9 of 97

View as Grid List
per page
  1. Cell Master-7 Digital Battery Capacity Checker
    $25.00
    Cell Master-7 Digital Battery Capacity Checker

    Cell Master-7 Digital Battery Capacity Checker

    Learn More
  2. BatShare ULTRA
    $39.95
    BatShare ULTRA

    The Smart-Fly BatShare enables you to use two battery packs and two switches to provide Dual-Redundant security to your airborne system, just like in full-size aircraft. With the Smart-Fly BatShare, you can tolerate a single failure (open-circuit, short-circuit, low voltage) in either battery pack, or switch, or battery wiring, without losing radio control.

    The Smart-Fly BatShare continually monitors both battery packs and switches for the one with the higher voltage, and routes that to your Rx and servos. You may combine different size packs. In practice, with two good packs, the BatShare draws power equally from both packs, adding their individual capacities. I.e., if Battery #1 is a 6V/1350mAH pack, and Battery #2 is a 6V/2700mAH pack, you will have 4050mAH power supply onboard, with at least 1350mAH to fly on, in case of a failure.

    The Batshare can be used with battery packs with a minimum voltage of 5.5V up to a maximum voltage of 30V.  4.8V NiCd/NiMH will NOT work with the BatShare.

    BatShareUltra Features:

    •     8A continuous current per input (dissipation limited)
    •     Very Low Voltage Drop, 0.47V @ 6A, 0.55V @ 12A
    •     Visual power indicator (LED)
    •     18ga wrie with Deans UltraPlug on inputs
    •     18ga wire with Deans UltraPlug on output

     

    Learn More
  3. Great Planes Charge Lead Banana Plugs/Star Deans Male
    $6.99
    Great Planes Charge Lead Banana Plugs/Star Deans Male

    Great Planes Charge Lead Banana Plugs/Star Deans Male

    This is the Great Planes Charge Lead
    with Banana Plugs and Star Plug Male Ultra Connector.

    FEATURES

    Charges a battery with a Star Plug Female Ultra connector

    INCLUDES

    One Great Planes Charge Lead with Banana Plugs and Star Plug

    REQUIREMENTS

    Connecting between battery and charger

    SPECIFICATIONS

    • Maximum Recommended Current: 10A
    • Connector #1: Banana Plugs
    • Connector #2: Star Plug
    • Wire: 14AWG 150mm (5.9") long
    • Weight: 26.45g (.93oz)
    Learn More
  4. ElectroDynamics EDR-207L NanoTest A123 BatteryTester
    $29.95
    ElectroDynamics EDR-207L NanoTest A123 BatteryTester

    ElectroDynamics EDR-207L NanoTest A123 BatteryTester

    Measures individual cell voltages under a 300mA load to a precision of ± 0.005V.

    • Aslo Balance A123, Li-Ion, Li-Po

    See attached PDF for Details

    Learn More
  5. Integy XT60 Charge Lead
    $9.99
    Integy XT60 Charge Lead

    XT60 Male-to-Banana Male Conn Adapter 300mm Harness, Charge Lead

    Learn More
  6. Balancer Board for 2S to 8S TP/JST-XH Balancer
    $12.99
    Balancer Board for 2S to 8S TP/JST-XH Balancer

    Balancer Board for 2S to 8S TP/JST-XH Balancer

    Learn More
  7. ElectroDynamics Pow'r Back'R Redundant Battery System
    $49.95
    ElectroDynamics Pow'r Back'R Redundant Battery System

    The EDR-108 Pow'R Back'R uses two 6.0 - 6.6V Battery Packs and two Switches to provide Dual-Redundant security to your airborne system, just like in full-size aircraft.

    With the EDR-108 Pow'R Back'R, you can tolerate a single failure (open-circuit, short-circuit, low voltage) in either battery pack, or switch, or battery wiring, without losing radio control.

    The EDR-108 Pow'R Back'R continually monitors both battery packs and switches for the one with the higher voltage, and routes that to your Rx and servos.

    You may combine different size packs. In practice, with two good packs, the EDR-108 draws power equally from both packs, adding their individual capacities.
    I.e., if Battery #1 is a 6V/600mAH pack, and Battery #2 is a 6V/1200mAH pack, you will have an 1800mAH power supply onboard, with at least 600mAH to fly on, in case of a failure. 

    TECH NOTE:


    Our EDR-108 Pow'R Back'R is STILL the ONLY Redundant Battery system currently on the market that offers TRUE "ground isolation" between the two batteries.

    This means that you can safely use any multi-output charger, or, two DC field chargers connected to the same 12V field box battery, to charge your two redundant batteries thru the switch harnesses, hassle-free.

    Without this feature exclusive to the EDR-108, your chargers may become confused by the "common ground" between the batteries, and the batteries may end up being improperly charged.  We all know what THAT means!

    Without our EDR-108?  The only safe way to charge those two batteries is to unplug one of them from the switch harness...  or, use two separate, single-output AC chargers.  What a hassle!

    FAQs:

    How much current can the EDR-108 handle?

        The EDR-108 is capable of handling up to 6 Amps continuous DC, and 20 Amps pulse (20ms ON / 40ms OFF).  That's more than RC system wiring and connectors can handle.  RC connectors are rated to handle a max. of 3 Amps

    Learn More
  8. PIK Extension with Multiplex MPX Connectors 40cm
    $17.50
    PIK Extension with Multiplex MPX Connectors 40cm

    PIK Extension with Multiplex Connectors - 40cm (15.74")

    New high quality extensions made with patented process

    Featuring:
    • No more broken solder joints
    • No more corroded terminals
    • Very easy to disconnect
    • With both male and female Multiplex connectors
    • 14 gauge (1.5mm) silicone wire, available in different lengths

    Learn More
Desc

Items 1-9 of 97

View as Grid List
per page
To Top