POWERBOX BATTERIES

POWERBOX BATTERIES

Powerbox Systems Batteries

Desc

8 Items

View as Grid List
per page
  1. Powerbox Mounting Frame for 1500 Battery
    $12.95
    Powerbox Mounting Frame for 1500 Battery

    Powerbox Mounting Frame for 1500 Battery.

    Learn More
  2. Powerbox Mounting Frame for 2800 Battery
    $12.95
    Powerbox Mounting Frame for 2800 Battery

    Powerbox Mounting Frame for 2800 Battery.

    Learn More
  3. Powerbox Mounting Frame for 3200 and 4000 Battery
    $12.95
    Powerbox Mounting Frame for 3200 and 4000 Battery

    Powerbox Mounting Frame for 3200 and 4000 Battery.

    Learn More
  4. PowerBox Battery 1500
    $110.00
    PowerBox Battery 1500

    PowerBox Battery 1500 MPX-PIX, 0.75mm cable

    Key Features

    • LiPo charger matched to the batteries in use
    • Temperature sensor
    • Low voltage monitor
    • Balancer for both LiPo cells
    • Charge state detector

    Overview

    The PowerBox Battery System, offering battery capacities of 1500 mAh, 2800 mAh and 4000 mAh, is yet another in-house development, designed specifically and exclusively for use as receiver and servo power supplies. They represent a pioneering approach to batteries for modeling applications. They were introduced in 2004, and remain the most modern system available. Sophsticated security electronics, controlled by an IC specially developed for the application and supported by an SMT temperature sensor, manage the entire charge process by monitoring the battery voltage, temperature and charge time. The monitor protects your valuable Lithium-Polymer battery.

    To charge your valuable Lithium-Polymer cells safely and reliably all you need is our mains PSU or 12 V car adapter. A robust case protects your Lithium-polymer battery, in particular from external influences and mechanical stress in the model. Operational security is further enhanced by the use of the battery mounting frame, developed specifically for this application. Each PowerBox Battery (2800, 1500 or 4000) is supplied complete with mounting frame and fixings, and the frames are also available separately for use in other models.

    Specifications:

    • Capacity: 1500 mAh / 7.40 Volt
    • Final charge voltage: 8.40 Volt
    • End of discharge: at 6.0 Volt
    • Charge voltage for internal charger: 10.5 - 17.0 Volt
    • Temperature range during discharge: 0° C to + 40° C
    • Weight incl. cables and connectors: 95 grammes
    • Dimensions: 88 x 46 x 17 mm (L x W x H)
    • Length of connecting lead: 270 mm
    • Weight of battery mount: 15 grammes

     

    Learn More
  5. PowerBox Li-FePo4 Battery 3200mah
    $145.00
    PowerBox Li-FePo4 Battery 3200mah

    The PowerBox Battery System has been developed specifically for use as receiver and servo power supplies.

    A sophisticated electronic safety circuit monitors battery voltage, temperature, charge current and charge time. The integral balancer monitors and regulates the voltage of the individual cells.

    All you need for safe, efficient charging of our high-quality LiPo and LiFePo4 cells is the 110 / 220 V main PSU or 12 V car adapter. This eliminates any danger of incorrect charging due to entering the wrong cell-count or battery type in the charge program. The PowerBox Battery can be left connected to the charger for long periods without suffering damage.
     

    The battery also includes an integral voltage monitor. The external plug-in LED allows the user to detect an imminent low-voltage condition even when the battery is not in use.

    A robust case protects the PowerBox Battery from all external influences and loads in the model. The mounting frame supplied as standard is installed permanently in the model, and ensures that the battery can never shift in flight. Mounting frames are also available separately. Since the PowerBox Battery can be removed from the frame quickly and easily, a single battery can be used in multiple models.

    After a few years the cells in the PowerBox Battery may become exhausted, but we offer a low-cost cell replacement service, which also includes a check of the electronics.

    Features:

        Integrated charge technology of the latest type
        Integral balancer
        Can be left in the model for charging
        Only a simple mains PSU is required for charging
        Integral monitoring of cell voltage, charge current and battery temperature
        Integral voltage monitor with external LED
        Strong external case provides protection from external influences
        Mounting frame holds the battery with completely reliability
        Mounting frame enables rapid battery swap
        Low-cost cell replacement service

    Battery type  LiFePo4
    Capacity  3200mAh
    Nominal voltage  6.6V
    Final charge voltage  7.2V
    Charge voltage  9V - 17V
    Weight  232g
    Weight, mounting frame  22g

    Temperature range, discharge  0°C to 60°C

    Learn More
  6. PowerBox Battery Charging Extension 50 cm
    $24.00
    PowerBox Battery Charging Extension 50 cm

    PowerBox Battery Charging Extension, 50 cm

    With an extension charge lead you have even greater freedom in positioning the PowerBox Battery in your model. Extension charge leads are available in 50 cm lengths.

    Learn More
  7. PowerBox Battery 2800
    $140.00
    PowerBox Battery 2800

    PowerBox Battery 2800 MPX-PIX, 0.75mm cable

    Key Features

     

    • LiPo charger matched to the batteries in use
    • Temperature sensor
    • Low voltage monitor
    • Balancer for both LiPo cells
    • Charge state detector

    Overview

    The PowerBox Battery System, offering battery capacities of 1500 mAh, 2800 mAh and 4000 mAh, is yet another in-house development, designed specifically and exclusively for use as receiver and servo power supplies. They represent a pioneering approach to batteries for modeling applications. They were introduced in 2004, and remain the most modern system available. Sophsticated security electronics, controlled by an IC specially developed for the application and supported by an SMT temperature sensor, manage the entire charge process by monitoring the battery voltage, temperature and charge time. The monitor protects your valuable Lithium-Polymer battery.

    To charge your valuable Lithium-Polymer cells safely and reliably all you need is our mains PSU or 12 V car adapter. A robust case protects your Lithium-polymer battery, in particular from external influences and mechanical stress in the model. Operational security is further enhanced by the use of the battery mounting frame, developed specifically for this application. Each PowerBox Battery (2800, 1500 or 4000) is supplied complete with mounting frame and fixings, and the frames are also available separately for use in other models.

    Specifications:

    • Capacity: 2800 mAh
    • Final charge voltage: 8.40 Volts
    • Final discharge voltage: 5.0 Volts
    • Charge voltage for internal charger:
      10,5 – 17,0 Volts
    • Temperature range during charge process:
      0° to +40° C
    • Weight including cables: 152 grammes
    • Dimensions: 106 x 65 x 16 mm (L,W,H)
    • Length of connecting lead: 270 mm
    • Weight of mounting frame: 18 grammes
    Learn More
  8. PowerBox Battery 4000
    $150.00
    PowerBox Battery 4000

    PowerBox Battery 4000 MPX-PIC, 0.75mm2 cable

    Key Features

    • LiPo charger matched to the batteries in use
    • Temperature sensor
    • Low voltage monitor
    • Balancer for both LiPo cells
    • Charge state detector

    Overview

    The PowerBox Battery System, offering battery capacities of 1500 mAh, 2800 mAh and 4000 mAh, is yet another in-house development, designed specifically and exclusively for use as receiver and servo power supplies. They represent a pioneering approach to batteries for modeling applications. They were introduced in 2004, and remain the most modern system available. Sophsticated security electronics, controlled by an IC specially developed for the application and supported by an SMT temperature sensor, manage the entire charge process by monitoring the battery voltage, temperature and charge time. The monitor protects your valuable Lithium-Polymer battery.

    To charge your valuable Lithium-Polymer cells safely and reliably all you need is our mains PSU or 12 V car adapter. A robust case protects your Lithium-polymer battery, in particular from external influences and mechanical stress in the model. Operational security is further enhanced by the use of the battery mounting frame, developed specifically for this application. Each PowerBox Battery (2800, 1500 or 4000) is supplied complete with mounting frame and fixings, and the frames are also available separately for use in other models.

    Specifications:

    • Capacity: 4000 mAh
    • Final charge voltage: 8.40 Volt
    • Entladeschluss-Spannung: 6.0 Volt
    • Charge voltage for internal charger:
      10.5 – 17.0 Volt
    • Temperature range during discharge process:
      0° C bis + 40° C
    • Weight including cables 258 grammes: 249 Gramm
    • Dimensions: 115 x 72 x 23 mm (L,B,H)
    • Length of connecting lead: 270 mm
    • Weight of mounting frame: 24 Gramm
    Learn More
Desc

8 Items

View as Grid List
per page
To Top