REGULATORS

REGULATORS
Desc

Items 1-9 of 15

View as Grid List
per page
  1. Booma RC IntelliReg HD
    $89.00
    Booma RC IntelliReg HD

    Booma RC IntelliReg HD

    IntelliReg Dual Heavy Duty regulator with battery voltage monitoring, built-in LCD, forced cooling and joystick control.

    Welcome to the worlds most intelligent regulator for Radio Controlled models and Robotics.

    IntelliReg HD (Heavy Duty with fan forced cooling) was designed for giant scale RC and Robotics enthusiasts by a giant scale RC and Robotics enthusiast.

    IntelliReg HD offers features never seen before in Radio Control applications in a compact, light weight and affordable package. Now you can see the voltage, monitor the voltage and make settings with ease using IntelliRegs built in joystick controller.
    IntelliReg was developed using medical industrial standards and here is the specification list.
    * High Quality 7oz PCB
    * Mag-Lev high quality forced cooling fan (see images for details).
    * High quality and long life Tantalum output filtering capacitors (see images for details).
    * Stainless Steel mounting bolts (see images for details).
    * Joystick control for easy setup and system monitoring (See images for details).

     

    IntelliReg HD Version 2 Features:

    • Microprocessor control - of 2 x independent high powered digital switching circuits into a high powered regulation circuit.
    • Works with all RC battery chemistries.
    • Regulation voltage between 4.8 and 8.4 volts (depending on battery chemistry).
    • Fail Safe Switching of both batteries.
    • DualBat Battery Redundancy - if a battery fails the other battery takes over.
    • Battery Voltage Monitoring of each battery.
    • Lowest Battery Voltage since last battery connection.
    • Temperature of the internal components.
    • Time of Last Flight or usage time.
    • Built in Flight Log - Displays the number of flights (races etc) on your models frame.
    • Selectable Battery Type - for monitoring of LifeP04, LiPo and Lion battery chemistries.
    • Low Voltage Alarm via LCD indication.
    • 2 x 15 Amp constant current capability with (dual 50A FETS for actual regulation).
    • Micro-Power design less than 0.4mA in standby mode.
    • Input Voltage 6v to 10v.
    • Weight 48 grams.
    • Dimensions 50mm x 69mm (2.0 x 2.7 inches).
    • Works with all switches including Intelliswitch, Wallaby Switch and our Pinflag Switch.
    Learn More
  2. Sahara Regulator EC3 In / 2 JR Out
    $54.00
    Sahara Regulator EC3 In / 2 JR Out

    The all new Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Sahara is capable of 9amps of continuous current. The new Sahara, is as light as the old retired "the Regulator" that used to be offered by Fromeco. Weighing in at 1.4oz's with 9"Deans and 2 JR out puts, and about 1.1oz with the "standard" JR in and out.  The new increased current capacity that the Sahara can handle makes it an excellent choice for the new power hungry servos in todays market.  

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, **3 out put leads, and a massive heat sink, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
  3. Super Sahara Regulator - Multiplex In /1 JR Out
    $67.50
    Super Sahara Regulator - Multiplex In /1 JR Out

    Super Sahara Regulator - Multiplex In / JR Out

    Providing One Multiplex Input ~ One JR Output

    The all new Super Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Super Sahara is capable of 25amps of continuous current. The Super Sahara is a perfect match for a fully 8711, or 5955 outfitted 35% to 40%.   Weighing in at 2.2oz's with 9"Deans and 2 JR out puts. 

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Super Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, 3 out put leads, and a massive heat sink and fan, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
  4. PowerBox  Voltage Regulator 5.9 volt
    $36.40
    PowerBox Voltage Regulator 5.9 volt

    PowerBox  Voltage Regulator - 5.9 volt

    Great little linear regulator for 5.9 volt applications.

    Good to 5 amps.

    Light weight (0.4 oz)and small size make it a great choice for in-line applications.

    Voltage Regulator (linear)

    The voltage regulator is designed to prevent excessive voltages reaching receivers and servos, and is a compact, lightweight device with an excellent performance.

    The unit enables the modeller to use modern Lithium-Polymer and LiFe batteries (two-cell 8.4 V packs) in models. It can also be used to limit the excess voltage of a five-cell NC battery.

    Any servo feedback currents which may arise are reliably absorbed by an electrolytic capacitor of generous capacity.

    Since the voltage regulator is so light (just 12.0 grammes), it can be fitted to any small to medium-sized model aircraft without increasing the airframe weight significantly.

    The unit is fitted with Uni, JR or Futaba connectors, as fitted to your battery. The connector is polarised: centre positive, both outer pins negative.
    Connecting the battery offset to one side will instantly ruin the regulator.
    The connecting lead attached to the voltage regulator can be plugged directly into the receiver socket.
    If you wish to use a switch in the power supply circuit, we recommend that you fit it between the voltage regulator and the batteries.

    Of course, the voltage regulator can also be used to complement other devices. For example, it is feasible to connect it to our switch backer or other non-regulated backer if you wish to use Lithium cells. The regulator can supply 3 - 5 Ampere (according to cooling efficiency), and this level of performance makes it suitable for use in models fitted with 6 - 8 standard servos or 5 - 6 digital servos.

    Since any voltage regulating device generates waste heat (varying according to current drain), the unit must always be housed in an open position in the model, i.e. not enclosed.
    The regulator is completely encapsulated using a modern "hot melt" process, with the result that it is totally protected from vibration and damp of all kinds.

           Specifications:  

    • Weight:  12.0 grammes
    • Voltage range:  4.0 - 9.0 Volts
    • Regulated voltage:    5.9 volts
    • Performance:  regulated 2.0 - 5.0 A according to cooling; peak (brief) 10 A
    • Regulator losses:  0.14 Volts
    Learn More
  5. PowerBox  Voltage Regulator 5.3 volt
    $36.40
    PowerBox Voltage Regulator 5.3 volt

    PowerBox  Voltage Regulator - 5.3 volt

    Great little linear regulator for 5.3 volt applications.

    Good to 5 amps.

    Light weight (0.4 oz)and small size make it a great choice for in-line applications.

    Voltage Regulator (linear)

    The voltage regulator is designed to prevent excessive voltages reaching receivers and servos, and is a compact, lightweight device with an excellent performance.

    The unit enables the modeller to use modern Lithium-Polymer and LiFe batteries (two-cell 8.4 V packs) in models. It can also be used to limit the excess voltage of a five-cell NC battery.

    Any servo feedback currents which may arise are reliably absorbed by an electrolytic capacitor of generous capacity.

    Since the voltage regulator is so light (just 12.0 grammes), it can be fitted to any small to medium-sized model aircraft without increasing the airframe weight significantly.

    The unit is fitted with Uni, JR or Futaba connectors, as fitted to your battery. The connector is polarised: centre positive, both outer pins negative.
    Connecting the battery offset to one side will instantly ruin the regulator.
    The connecting lead attached to the voltage regulator can be plugged directly into the receiver socket.
    If you wish to use a switch in the power supply circuit, we recommend that you fit it between the voltage regulator and the batteries.

    Of course, the voltage regulator can also be used to complement other devices. For example, it is feasible to connect it to our switch backer or other non-regulated backer if you wish to use Lithium cells. The regulator can supply 3 - 5 Ampere (according to cooling efficiency), and this level of performance makes it suitable for use in models fitted with 6 - 8 standard servos or 5 - 6 digital servos.

    Since any voltage regulating device generates waste heat (varying according to current drain), the unit must always be housed in an open position in the model, i.e. not enclosed.
    The regulator is completely encapsulated using a modern "hot melt" process, with the result that it is totally protected from vibration and damp of all kinds.

           Specifications:  

    • Weight:  12.0 grammes
    • Voltage range:  4.0 - 9.0 Volts
    • Regulated voltage:    5.3 Volts
    • Performance:  regulated 2.0 - 5.0 A according to cooling; peak (brief) 10 A
    • Regulator losses:  0.14 Volts
    Learn More
  6. Sahara Regulator Multiplex in /2 JR Out
    $50.50
    Sahara Regulator Multiplex in /2 JR Out

    Sahara Regulator - Multiplex in /2 JR Out

    The all new Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Sahara is capable of 9amps of continuous current. The new Sahara, is as light as the old retired "the Regulator" that used to be offered by Fromeco. Weighing in at 1.4oz's with 9"Deans and 2 JR out puts, and about 1.1oz with the "standard" JR in and out.  The new increased current capacity that the Sahara can handle makes it an excellent choice for the new power hungry servos in todays market.  

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, **3 out put leads, and a massive heat sink, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
  7. Sahara Regulator - Deans In /2 JR Out
    $50.50
    Sahara Regulator - Deans In /2 JR Out

    Sahara Regulator - Deans In /2 JR Out

    The all new Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Sahara is capable of 9amps of continuous current. The new Sahara, is as light as the old retired "the Regulator" that used to be offered by Fromeco. Weighing in at 1.4oz's with 9"Deans and 2 JR out puts, and about 1.1oz with the "standard" JR in and out.  The new increased current capacity that the Sahara can handle makes it an excellent choice for the new power hungry servos in todays market.  

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, **3 out put leads, and a massive heat sink, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
  8. Sahara Regulator - Deans In / Deans Out
    $54.00
    Sahara Regulator - Deans In / Deans Out

    Sahara Regulator - Deans In / Deans Out

    The all new Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Sahara is capable of 9amps of continuous current. The new Sahara, is as light as the old retired "the Regulator" that used to be offered by Fromeco. Weighing in at 1.4oz's with 9"Deans and 2 JR out puts, and about 1.1oz with the "standard" JR in and out.  The new increased current capacity that the Sahara can handle makes it an excellent choice for the new power hungry servos in todays market.  

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, **3 out put leads, and a massive heat sink, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
  9. Sahara Regulator - EC3 In / EC3 Out
    $54.00
    Sahara Regulator - EC3 In / EC3 Out

    The all new Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Sahara is capable of 9amps of continuous current. The new Sahara, is as light as the old retired "the Regulator" that used to be offered by Fromeco. Weighing in at 1.4oz's with 9"Deans and 2 JR out puts, and about 1.1oz with the "standard" JR in and out.  The new increased current capacity that the Sahara can handle makes it an excellent choice for the new power hungry servos in todays market.  

    Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

    Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, **3 out put leads, and a massive heat sink, as standard equipment and you have a regulator like few others in the market.

    The Sahara Heat Sink

    As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured the Heat Sink is capable of shedding large amounts of heat.

    Pictured, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration.

    The "Inside" on Fromeco's Current Ratings

    Fromeco believes very strongly that our Equipment be rated no higher than it's weakest component. In the case of The Regulator this would be the "Hobby Type" connectors we all have to use to interface with our RX's. These connectors are only Rated @3amps per connector. Because of this Fromeco offers options on the input and out put of our Regulators.

    Regulator with standard connectors     3amps

    Regulator with Deans or PowerPoles and
    2 JR out puts.                  6amps

    Regulator with Deans or PowerPoles and
    3 JR out puts.                  9amps

    Deans in and Deans out would be considered and unlimited rating for RC RX uses.

    Learn More
Desc

Items 1-9 of 15

View as Grid List
per page
To Top