In stock
SKU
P-SPH5

JetCat SPH5 Helicopter Engine

$4,095.00
The operation of the SPH engines is analogous to the SPT engines, but instead of a planetary gear, a 90 degree bevel gear is mounted, which drives in the normal case in a directly mounted centrifugal clutch.

CALL TO ORDER

JetCat SPH5 twin-shaft helicopter engines
The operation of the SPH engines is analogous to the SPT engines, but instead of a planetary gear, a 90 degree bevel gear is mounted, which drives in the normal case in a directly mounted centrifugal clutch. A Hall sensor measures the transmission output speed. The respective gear ratios are freely programmable in the ECU (gear output to main rotor, main rotor to tail rotor). The user can thus directly program the desired main rotor speed, the rest is done by the software of the ECU. The JetCat SPH engines are preferably used in helicopters. An ECU software specially developed for this application allows the free programming of up to three main rotor speeds, which can then be switched on the transmitter side via a 3-position switch.

Pressure ratio    2
Mass flow (kg / s)    0.14
Fuel consumption full load (ml / min)    260
Fuel consumption idling (ml / min)    95
Weight [g]    2200
Dimensions / Diameter (mm)    83
Length (including starter) (mm)    375 x 140
Weight set in box (g)    
Dimensions cardboard (LxWxH; cm)    
Exhaust temperature (° C)    480-730
Idle speed 1st shaft (rpm)    50000
Full load speed 1st shaft Max Rpm (1 / min)    170000
Maximum speed 1st shaft (1 / min)    170000
Gear ratio (2nd wave)    3.45
Idle speed 2nd shaft (rpm)    6200
propeller    -
Full load speed 2nd shaft (1 / min) (under load)    17000 to 21000
Maximum speed of main rotor shaft (1 / min)    -
2nd shaft torque (Ncm)    377

Heli Turbines are special order only. Please call for delivery times.

More Information
SKU P-SPH5
Write Your Own Review
Only registered users can write reviews. Please, Sign in or create an account
To Top