In stock
SKU
PBX-3125

Powerbox Gemini II with Magnet

$125.00

Want to switch the unit with a SensorSwitch? Or a magnet? With the new PowerBox Gemini II the choice is yours!

Product description:

The Gemini II is the logical development of the PowerBox Gemini, which we have produced unchanged since 2005. The revised design incorporates ideas gleaned from customer requests and our own experience. The Gemini II has a considerably higher performance than the earlier model, since the case now consists of a high-quality machined aluminium heat-sink. Numerous supplementary features have also been added. For example, the pilot now has two options for activating the system: either by push-button using the SensorSwitch, or using a magnet. This also allows the implementation of a concealed installation; in this case an integral buzzer indicates the ON and OFF state.
 

Like all power supply systems from PowerBox Systems, the Gemini II boasts consistent redundant construction: two regulators, two controllers and two integral Hall sensors ensure a totally reliable power supply. The external SensorSwitch activates both electronic switches simultaneously. The tri-colour LEDs in the SensorSwitch indicate the battery status in four stages. The battery inputs take the form of MPX high-current connectors.
The output voltage is double-regulated, and can be set either to 5.9 V or 7.4 V.

Features:

  •     Double-regulated output voltages for receivers and servos
  •     Electronic On / Off switch, using either a magnetic trigger or the SensorSwitch
  •     On and Off switching signalled by visual and audible indicators
  •     Regulated output voltage of 5.9 V or 7.4 V
  •     LED voltage indicator for each battery separately
  •     Supports three battery types: LiPo, NiMH / NiCd, LiFePo
  •     Suppression of any servo feedback currents which might occur
  •     MPX battery inputs

Technical Data:

  • Operating voltage  4.0V - 9.0V
  • Power supply  2S LiPo, 2S LiFePo, 5S NiCd/NiMH
  • Current drain Power-on state  56mA
  • Current drain Standby  16µA
  • Maximum load current  Peak 2x6A
  • Drop-out voltage  0.3V
  • Output voltage  5.9V or 7.4V regulated
  • Dimensions  60x30x15 mm


This model includes the Magnet and Sensor.

Want to switch the unit with a SensorSwitch? Or a magnet? With the new PowerBox Gemini II the choice is yours!

Product description:

The Gemini II is the logical development of the PowerBox Gemini, which we have produced unchanged since 2005. The revised design incorporates ideas gleaned from customer requests and our own experience. The Gemini II has a considerably higher performance than the earlier model, since the case now consists of a high-quality machined aluminium heat-sink. Numerous supplementary features have also been added. For example, the pilot now has two options for activating the system: either by push-button using the SensorSwitch, or using a magnet. This also allows the implementation of a concealed installation; in this case an integral buzzer indicates the ON and OFF state.
 

Like all power supply systems from PowerBox Systems, the Gemini II boasts consistent redundant construction: two regulators, two controllers and two integral Hall sensors ensure a totally reliable power supply. The external SensorSwitch activates both electronic switches simultaneously. The tri-colour LEDs in the SensorSwitch indicate the battery status in four stages. The battery inputs take the form of MPX high-current connectors.
The output voltage is double-regulated, and can be set either to 5.9 V or 7.4 V.

Features:

  •     Double-regulated output voltages for receivers and servos
  •     Electronic On / Off switch, using either a magnetic trigger or the SensorSwitch
  •     On and Off switching signalled by visual and audible indicators
  •     Regulated output voltage of 5.9 V or 7.4 V
  •     LED voltage indicator for each battery separately
  •     Supports three battery types: LiPo, NiMH / NiCd, LiFePo
  •     Suppression of any servo feedback currents which might occur
  •     MPX battery inputs

Technical Data:

  • Operating voltage  4.0V - 9.0V
  • Power supply  2S LiPo, 2S LiFePo, 5S NiCd/NiMH
  • Current drain Power-on state  56mA
  • Current drain Standby  16µA
  • Maximum load current  Peak 2x6A
  • Drop-out voltage  0.3V
  • Output voltage  5.9V or 7.4V regulated
  • Dimensions  60x30x15 mm


This model includes the Magnet and Sensor.

More Information
SKU PBX-3125
Model N/A
Product Manufacturer N/A
Write Your Own Review
Only registered users can write reviews. Please, Sign in or create an account
To Top