MKS SERVOS

MKS SERVOS

All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba.
Micro and wing servos all use a MKS 5mm spline.

Desc

Items 1-9 of 16

View as Grid List
per page
  1. MKS HV747H High Voltage Mini Servo
    $92.99
    MKS HV747H High Voltage Mini Servo

    MKS HV747H High Voltage Mini Servo

     

    • Dead Band  0.001ms
    • Working Frequence  1520μs / 333hz
    • Operating Voltage  5.5 ~ 8.4 V DC Volts (2S Lipo un-regulated)
    • Operating Speed (6V)  0.17s
    • Operating Speed (7.4V)  0.14s
    • Operating Speed (8.4V)  0.13s
    • Stall Torque (6V)  11.8kg/cm
    • Stall Torque (7.4V)  13.8kg/cm
    • Stall Torque (8.4V)  15kg/cm
    • Motor Type  Coreless Motor
    • Gear Type  Chrome-Titanium alloy gear
    • Connector Wire Length  29.5 cm
    • Dimensions  35.5 x 15 x 28.5 mm
    • Weight  38.55g

    Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.

    Learn More
  2. MKS DS1220 Titanium Gear Ultra High Torque Standard Digital
    $79.99
    MKS DS1220 Titanium Gear Ultra High Torque Standard Digital

    MKS DS1220 Titanium Gear Ultra High Torque Standard Digital Servo

    • Dead Band  0.0008ms (Default)
    • Control System  +Pulse Width Control
    • Working Frequence  1520μs / 333hz
    • (RX) Required Pulse  3.0~6.6 Volt Peak to Peak Square Wave
    • Operating Voltage  4.8~6.6 V DC Volts
    • Operating Temperature Range  -10 to + 60 Degree C
    • Operating Speed (6V)  0.159 sec/60° degrees at no load
    • Operating Speed (6.6V)  0.14 sec/60° dagrees at no load
    • Stall Torque (6V)  24.9 kg-cm (346 oz/in)
    • Stall Torque (6.6V)  30.4 kg-cm (422 oz/in)
    • Motor Type  Coreless Motor
    • Potentiometer Drive  Direct Drive
    • Driver Type  FET
    • Bearing Type  Dual Ball Bearings
    • Gear Type  Titanium Gears
    • Programmable  NO
    • Connector Wire Length  15.0 cm (5.9 in)
    • Dimensions  40X20X37 mm
    • Weight  57.70 g ( 2.03oz)

    Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.

    Learn More
  3. MKS HV6130H Thin Digital Servo
    $77.50
    MKS HV6130H Thin Digital Servo

    MKS HV6130H Thin Digital Servo

    Dead Band  0.001 ms
    Control System  +Pulse Width Control
    Working Frequence  1520μs / 333Hz
    Operating Voltage  3.5~8.4 V DC Volt (2S Lipo un-regulated)
    Operating Speed (6V)  0.14 sec/60° degrees at no load
    Operating Speed (7.4V)  0.11 sec/60° degrees at no load
    Operating Speed (8.4V)  0.10 sec/60° degrees at no load
    Stall Torque (6V)  6 Kg/cm (83 oz/in)
    Stall Torque (7.4V)  7.6 Kg/cm (105.5 oz/in)
    Stall Torque (8.4V)  8.1 Kg/cm (112.5 oz/in)
    Motor Type  Coreless Motor
    Potentiometer Drive  Direct Drive
    Bearing Type  3x Ball Bearings + 2x Jewel Bearing
    Gear Type  Metal Alloy gear
    Dimensions  30x10x29.8 mm (1.1811X0.39X1.17 in)
    Weight  23g (0.81oz)

    See additional images for dimensions.

     

    Learn More
  4. MKS HV6130 Thin Wing Digital Servo
    $77.50
    MKS HV6130 Thin Wing Digital Servo

    MKS HV6130 Sailplane Thin Wing Digital Servo

    Dead Band  0.001 ms
    Control System  +Pulse Width Control
    Working Frequence  1520μs / 333Hz
    Operating Voltage  3.5~8.4 V DC Volt (2S Lipo un-regulated)
    Operating Speed (6V)  0.14 sec/60° degrees at no load
    Operating Speed (7.4V)  0.11 sec/60° degrees at no load
    Operating Speed (8.4V)  0.10 sec/60° degrees at no load
    Stall Torque (6V)  6 Kg/cm (83 oz/in)
    Stall Torque (7.4V)  7.6 Kg/cm (105.5 oz/in)
    Stall Torque (8.4V)  8.1 Kg/cm (112.5 oz/in)
    Motor Type  Coreless Motor
    Potentiometer Drive  Direct Drive
    Bearing Type  3x Ball Bearings + 2x Jewel Bearing
    Gear Type  Metal Alloy gear
    Dimensions  30x10x29.8 mm (1.1811X0.39X1.17 in)
    Weight  23g (0.81oz)

    See additional images for dimensions.

     

    Learn More
  5. MKS HV1250 Coreless High Speed 8.2V Digital Servo
    $89.99
    MKS HV1250 Coreless High Speed 8.2V Digital Servo

    MKS HV1250 Coreless High Speed 8.2V Digital Servo

    • Dead Band  0.0008ms (Default)
    • Control System  +Pulse Width Control
    • Working Frequence  1520μs / 333hz
    • (RX) Required Pulse  3.0~8.4 Volt Peak to Peak Square Wave
    • Operating Voltage  4.8~8.4 V DC Volts
    • Operating Temperature Range  -10 to + 60 Degree C
    • Operating Speed (7.4V)  0.061 sec/60° degrees at no load
    • Operating Speed (8.4V)  0.054 sec/60° dagrees at no load
    • Stall Torque (7.4V)  10.4 kg-cm (183 oz/in)
    • Stall Torque (8.4V)  11 kg-cm (144.43 oz/in)
    • Motor Type  Coreless Motor
    • Potentiometer Drive  Direct Drive
    • Driver Type  FET
    • Bearing Type  Dual Ball Bearings
    • Gear Type  Titanium Gears
    • Programmable  NO
    • Connector Wire Length  15.0 cm (5.9 in)
    • Dimensions  40X20X37 mm
    • Weight  57.70 g ( 2.03oz)

    See additional images for dimensions.

    Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.SKU  MKS-HV1250
     

    Learn More
  6. MKS HV777A+ Digital Ultra Torque High Voltage Servo
    $114.99
    MKS HV777A+ Digital Ultra Torque High Voltage Servo

    HV777A+ Aluminum upper Casing (0.1 sec/60° - 40.40 kg.cm (561.1 oz/in) @8.2V)

    • SKU  RC-MKS-HV777A+
    • Dead Band  0.0008 ms (Default)
    • Control System  +Pulse Width Control
    • Working Frequence  1520μs / 333hz
    • (RX) Required Pulse  3.5 ~8.4 Volt Peak to Peak Square Wave
    • Operating Voltage  6.0 ~7.4 V DC Volts
    • Operating Temperature Range  -10 to + 60 Degree C
    • Operating Speed (6V)  0.13 sec/60° degrees at no load
    • Operating Speed (7.4V)  0.11 sec/60° degrees at no load
    • Operating Speed (8.4V)  0.10 sec/60° degrees at no load
    • Stall Torque (6V)  29.50 kg/cm - 409.7 oz/in
    • Stall Torque (7.4V)  36.5 kg/cm - 506 oz/in
    • Stall Torque (8.4V)  40.40 kg/cm - 561.1 oz/in
    • Motor Type  Coreless Motor
    • Potentiometer Drive  Indirect Drive
    • Driver Type  FET
    • Bearing Type  Dual Ball Bearings
    • Gear Type  Titanium Gears
    • Connector Wire Length  15.0 cm (5.9 in)
    • Dimensions  40X20X40 mm (1.57x0.97x1.57 in)
    • Weight  75.45g - (2.66 oz)
    Learn More
  7. MKS HV6100 High Torque Coreless Thin 8.4V Digital Servo
    $43.99
    MKS HV6100 High Torque Coreless Thin 8.4V Digital Servo

    MKS HV6100 High Torque Coreless Thin 8.4V Digital ServoSKU  MKS-HV6100

    • Dead Band  0.001ms (Default)
    • Control System  +Pulse Width Control
    • Working Frequence  1500us / 333hz
    • (RX) Required Pulse  3.0 ~ 5.0 Volt Peak to Peak Square Wave
    • Operating Voltage  3.8 ~ 8.4 V DC Volts
    • Operating Temperature Range  -10 to + 60 Degree C
    • Operating Speed (6V)  0.14 sec/60° degrees at no load
    • Operating Speed (7.4V)  0.11 sec/60° degrees at no load
    • Operating Speed (8.4V)  0.10 sec/60° degrees at no load
    • Stall Torque (6V)  2.6 kg.cm (36.11 oz/in)
    • Stall Torque (7.4V)  3.0 kg.cm (41.66 oz/in)
    • Stall Torque (8.4V)  3.2 kg.cm (47.22 oz/in)
    • Motor Type  Coreless Motor
    • Potentiometer Drive  Direct Drive
    • Driver Type  FET
    • Bearing Type  2 Jewel Bearing + 1 Bronze Bushing
    • Gear Type  Metal + Aluminum-magnesium alloy Gears
    • Connector Wire Length  15.0 cm (5.9 in)
    • Dimensions  22.5X10X23.5 mm (0.89x 0.39x 0.93 in)
    • Weight  10 g (0.35 oz)

    See additional images for dimensions.


    Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.

    Learn More
  8. MKS HV93 High Speed Micro Digital Servo
    $69.99
    MKS HV93 High Speed Micro Digital Servo

    MKS HV93 High Speed Micro Digital Servo

    • SKU  MKS-HV93
    • Dead Band  0.001ms (Default)
    • Control System  +Pulse Width Control
    • Working Frequence  1520μs / 333hz
    • Operating Voltage  3.8~8.4 V DC Volts
    • Operating Speed (6V)  0.07 sec/60° degrees at no load
    • Operating Speed (8.4V)  0.05 sec/60° dagrees at no load
    • Stall Torque (6V)  31.25 oz/in (2.25 kg-cm)
    • Stall Torque (8.4V)  44.44 oz/in (3.2 kg-cm)
    • Motor Type  Coreless Motor
    • Potentiometer Drive  Direct Drive
    • Bearing Type  Dual Ball Bearings
    • Gear Type  Chrome-Titanium alloy gear
    • Programmable  NO
    • Dimensions  23X12X27.25 mm (0.9X0.47X1.07 in)
    • Weight  19.87 g

    See additional images for dimensions.

    Note: Not standard Futaba Spline.  Use DS6125 Arms.

    Learn More
  9. MKS HV747 Coreless Mini High Torque 8.4V Digital Servo
    $92.99
    MKS HV747 Coreless Mini High Torque 8.4V Digital Servo

    MKS HV747 Coreless Mini High Torque 8.4V Digital Servo

    • SKU  MKS-HV747
    • Dead Band  0.001ms
    • Working Frequence  1520μs / 333hz
    • Operating Voltage  5.5 ~ 8.4 V DC Volts (2S Lipo un-regulated)
    • Operating Speed (6V)  0.17s
    • Operating Speed (7.4V)  0.14s
    • Operating Speed (8.4V)  0.13s
    • Stall Torque (6V)  11.8kg/cm
    • Stall Torque (7.4V)  13.8kg/cm
    • Stall Torque (8.4V)  15kg/cm
    • Motor Type  Coreless Motor
    • Gear Type  Chrome-Titanium alloy gear
    • Connector Wire Length  29.5 cm
    • Dimensions  35.5 x 15 x 28.5 mm
    • Weight  38.55g

    See aditional images for dimensions.

    Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.

    Learn More
Desc

Items 1-9 of 16

View as Grid List
per page
To Top