- $29.99Borescope Inspection Camera
Description: The new electronic product 5.5mm diameter endoscope is now the most smallest in diameter in the world. With the focal distance of 3cm to infinite,the image can be seen clearly via it in dark area. The 6 LED lighting can be free adjustable according to your need and capture 1.3MP image. The fine and high technology product can greatly meet your needs as Intraoral camera,underwater camera,waterproof Micro-camera,motor vehicle detector,sewer pipeline detector,search and rescue,criminal and custom detector,archaeological detect,the PCB detection,home care,aviation and space industries,care and tractors industries,petroleum drilling industries,constructions and so on.
- Waterproof wire endoscope
- Diameter:5.5mm head, 5 meters long flexible tube
- High resolution 1.3MP with 1/12" VGA CMO
- 6 LED lighting adjustable, can be inspected the hard-to-see areas.
- Waterproof : IP67, 60°Viewable Angle. Can take photo & video and save in your computer.
Package content:1USB Endoscope,1Software CD,1User ManualThis Mini USB Inspection Endoscope use optoelectronic technology to investigate hard-to-reach area. It helps you to diagnose broken part, weld point and machine equipment to save time and increase productivity. It is also can be used in medical treatment.Small size,light weight,and its high definition make it a good assistant in your work and life.
- Flexible cable Neck: 500cm long
- Function items: Spec Description Camera: 1/12'' VGA COMS Pixel: 640480. 1280720 Resolution: 12801024,1280720, 800600, 640480, 352288 Capture Resolution: Up to 640480,1280720
- LED: 6pcs LED light Brightness Auto Exposed ontrol: Auto F/NO: 2.8 Camera gousing diameter: 5.5mm Wide visual view angle: 60°
- Led switch : Adjustable lightness switch Focal Distance: 3CM-infinate
No longer must you question the quality of your aircraft structure; inspect it yourself! A must have for every ARF owner!!Learn More
- $8.00SECRAFT Canopy Lock V1 (M4) Red
SECRAFT Canopy Lock V1_M4 (2) - Red
Material: aluminium 6061-T6 (anodized)
Bolt Size : M4 (Bolt not inclulded)
2 per package
Installation washer set is designed to streamline and simplify removal and installation process. Easily installs to the side of the fuselage or engine cowl. Helps simplify opening canopy or removing engine cowl when needed. You will need to provide your own 6-32 bolt.Learn More
- $65.00SparkSwitch 12V
Powerbox SparkSwitch - 12V Regulated Output
- Operating voltage 4.0V - 9.0V
- Current drain Power-on state 19mA
- Current drain Standby 0.2μA
- Maximum load current max. 2A
- Output voltage 5.9V / 7.4V / 12V
- Signal input PWM
- Dimensions 56 x 19 x 16 mm
- Weight 22g incl. Patchwire
The SparkSwitch is a reliable, high-performance ignition switch. The overall design of the SparkSwitch is deliberately simple, but omits no important functions. The ignition switch is immediately ready for use as supplied, and needs no setting up. The only requirement is to set up the switch channel at the RC system transmitter.
The SparkSwitch can be used to turn the ignition circuit on and off from the transmitter, and is suitable for use with power supplies consisting of NC, LiPo or LiFe cells. The output voltage is subject to linear stabilisation, and is regulated at 5.9 Volt: a value which is suitable for all types of ignition system. The separate plug-in ultra-bright 5 mm LED should be mounted in the area of the engine cowl, in order to indicate the switched state.
A particularly user-friendly feature is that the unit detects when the receiving system is switched off, and draws no current from the ignition battery thereafter. This means that there is no need for an additional switch between the battery and the SparkSwitch, and forgetting to switch off the ignition battery is no longer a problem.
As you would expect, the battery can also be recharged without being disconnected.
The power circuits for the receiver and the ignition system are isolated from each other by an opto-coupler, effectively preventing interference from reaching the receiver.
The set includes accessories such as two connecting leads and the LED and mount.
The SparkSwitch has also proved excellent in practice as an electronic switch for supplementary working systems such as lighting circuits.Learn More
- $10.99Tailwheel Bracket, 16-35 lb
- Springs absorbs both ground bumps and steering shocks
- Solid plastic bracket mount
- 1/8" diameter spring steel axle
- All necessary hardware is included
- Tailwheel not included
Sullivan's 16-35 lbs tailwheel brackets for RC AirplanesLearn More