ZAP Adhesives

ZAP Adhesives

What Ever Your Application
What Ever Your Demands . . .

The Zap Adhesive System
has the most complete range
of formulas and sizes to fit
your needs.

Desc

Items 1-9 of 12

View as Grid List
per page
  1. Poly ZAP Glue, 1/2 oz
    $5.99
    Poly ZAP Glue, 1/2 oz

    Poly ZAP Glue, 1/2 oz

    High-performance formula for lexan, delron, nylon, plycarbonate, rubber, etc. Ideal for canopies and ARF Kits. Won't fog if Kicker is not used. 1/2-oz

    Learn More
  2. ZAP Z-ENDS Tips (24)
    $4.99
    ZAP Z-ENDS Tips (24)
    •     ALLOWS FOR SMALLER DROPS
    •     PRECISION APPLICATION
    •     EXTENSION INTO HARD-TO-REACH PLACES
    •     FITS MOST BRANDS OF CA BOTTLES

    Flexi-tips allow micro drops of glue to be placed in hard-to-reach areas.

    Pack of 24

    Learn More
  3. Slo ZAP CA Glue - 1oz
    $8.19
    Slo ZAP CA Glue - 1oz

    Slo ZAP CA Glue, 1 oz

    Thick and strong for high-stress areas. Ideal for laminating and forming fillets. Allows you 30 seconds to position; cures in 60 sec.

    Learn More
  4. ZAP Gel 3gram
    $1.79
    ZAP Gel 3gram
    • SUPER THICK FORMULA
    • JELLY LIKE CONCENTRATED CA
    • WILL NOT RUN OR FLOW
    • CAN BE APPLIED TO VERTICAL OR OVERHEAD SURFACES
    • USE ZIP KICKER TO ACCELERATE CURE TIME  

    Uses:

    ZAP GEL Is the thickest and strongest CA glue available. The tube comes with a long tapered tip allowing precise application of just the right amount of CA. From small pin point drops to the ability to lay down a bead of glue makes it very popular for many different hobbies and industries. The role playing gaming industry uses It for gluing pewter and plastic figures of all sizes. Fly tiers and custom lure manufactures like ZAP GEL because it stays where they want it. Jewelry makers like the high strength and the ability to apply just the right amount. Model builders also like the high strength features and use it for servo mounts, laminating, gluing plywood, anywhere a fast curing high strength joint is needed. Great for a clamp-less fixture in furniture and door / window manufacturing.

    Helpful Hints: 

    ZAP GEL a gap filling formula, it will fill open pockets in porous woods and materials with one application. To speed the cure time ZIP KICKER may be sprayed on the joint after the glue has been applied. When forming a fillet or filling a large gap spray ZIP KICKER directly on the glue, it will start to harden immediately first forming a hard outer shell with the inside curing at a slower rate creating an extremely strong bond. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. The curing time will vary depending on the thickness of the glue. When spread out thinly it will cure much faster than a thick bead. For critical applications test sample joints for designed strength requirements. 

    Learn More
  5. ZAP Z-ENDS Tips
    $4.25
    ZAP Z-ENDS Tips
    • 10 EXTENDER TIPS
    • 12 INCHES OF MICRO-DROPPER TUBING
    • WORKS WITH ALL SIZE BOTTLES OF ZAP

    Uses:

    Into, under, around, or through, Z-ENDS extend the length of ZAP bottle nozzles for getting into hard-to-reach areas. Use Z-ENDS for more precise control of glue placement and glue amount. Since Z-ENDS are replaceable, a clogged or damaged glue tip doesn’t mean tossing out that bottle and wasting glue. The Micro-Dropper tubing is used to deposit very small amounts of glue to the smallest of areas. The tubing fits into the open end of either the standard bottle or Z-END. The tubing comes standard at 12 inches long but can be cut as needed to suit your needs. 

    Helpful Hints: 

    Z-ENDS fit over the standard bottle ends of all ZAP glues. The tips of Z-ENDS can be cut back to deposit larger amounts of glue. Sometimes glue can build up on the outside of a Z-END, let it harden and it will pop right off leaving a clean open tip. When using the Micro-Dropper tubing let the glue wick down through to the tube end, then gently squeeze the bottle to deliver a small drop of glue.

    Learn More
  6. Z-7 Debonder
    $3.99
    Z-7 Debonder
    • DEBONDING AGENT FOR ALL SUPER GLUES
    • REMOVES CURED CYANOACRYLATE
    • WILL NOT CRAZE MOST PLASTICS
    • ODORLESS

    Uses:

    Z-7 DEBONDER works to remove cured CA glues from skin, work surfaces, most plastics, and model finishes. Z-7 DEBONDER can also be used to remove adhesive left from stickers, pen and marker inks, some paints and stains, decals, correction fluids and finger nail polish. You can use Z-7 DEBONDER to weatherize and highlight your models and soften CA glue prior to sanding.

    Helpful Hints:

    Z-7 DEBONDER Is best applied directly from the bottle right onto the glue to be removed. Z-7 DEBONDER works by softening the glue so it can be wiped away. Several applications may be necessary to completely remove all of the glue. To remove from your fingers or other body parts, apply Z-7 DEBONDER directly on the glue let it sit for a minute or so, rub the area with your finger, wipe away the softened glue and apply additional Z-7 DEBONDER if needed. If your fingers are glued together apply Z-7 DEBONDER all around the area glued, let it work on the glue for a minute or so, then gently roll your fingers to loosen the glue, apply more and continue working the glued area until yours fingers separate. To remove from a surface, apply directly to the glue and let sit for several minutes, wipe away the softened glue and repeat the application if required. To weather your model apply debonder to a rag first and gently wipe the painted areas you wish to look worn. Although Z-7 DEBONDER will work on most materials and paints, always test on samples for compatibility.

    Learn More
  7. ZAP-O Foam Safe Odorless .7oz
    $11.39
    ZAP-O Foam Safe Odorless .7oz

    Features:

    • Odorless "no more tears" formula
    • Safe for all hobby foams
    • Medium thick, cures in 15 seconds
    • .7 oz bottle

    Overview:

    Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PAAPT28).

    Works best on:

    • Carbon Fiber
    • Cell Foam
    • Ceramics
    • EPS Foam
    • Foam Board
    • Polystyrene
    • Wood
    • XPS Foam
    Learn More
  8. Slow Zap CA- 2oz
    $14.69
    Slow Zap CA- 2oz
    • VERY HIGH VISCOSITY FORMULA
    • SUPER THICK AND SUPER STRONG
    • ALLOWS PART POSITIONING FOR APPROXIMATELY 30 TO 40 SECONDS
    • USE ZIP KICKER TO ACCELERATE CURE TIME
    • AVAILABLE IN 2 SIZES

    Uses:

    SLO ZAP CA Is called a thick formula. The thicker the formula, the slower the cure time, that’s why we call it SLO ZAP. Although it is thick it is still a liquid and will flow. Penetration into porous materials is very minimal. SLO ZAP is an excellent gap filler and provides extra time when positioning wood parts. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas. This is a specialty glue and mostly used in modeling, wood working, antique furniture repair, and mold / pattern shops. Wood turners use this product as the final filler when repairing larger cracks. Furniture refinishers use this glue in conjunction with zip kicker to repair loose chair rungs, and mortis and tenon joints. Mold and pattern shops use it to fill in cracks and seams. Use it on fiberglass and fabric to partially fill in the weave and to bond the cloth to the substrate. When dry it produces a very hard surface.

    Helpful Hints:

    This glue is SLOW but STRONG!! Use it on harder types of wood. For maximum strength let SLO ZAP cure on its own, best accomplished by providing some light to medium clamping pressure on the pieces to be joined. SLO ZAP will set up faster when sprayed with kicker, the outside will cure immediately but still allow about 30 seconds to allow the inside to fully cure. To speed the cure time and still have a few seconds of positioning, spray ZIP KICKER on one part, let dry, apply SLO ZAP to the other, then join the two parts. When fixing furniture joints, separate the parts if possible, treat the tenon or rung with ZIP KICKER, making sure not to get any on the other part, let the kicker dry, put SLO ZAP in the mating part and join the two together. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. For critical applications test sample joints for designed strength requirements.

    Learn More
  9. Zap Thin CA 2oz
    $13.29
    Zap Thin CA 2oz
    • SUPERIOR PENETRATING FORMULA
    • SUPER THIN - WATER LIKE CONSISTENCY
    • BONDS AND CURES IN 1 TO 5 SECONDS
    • WORKS ON MOST MATERIALS
    • AVAILABLE IN 5 CONVENIENT SIZES

    Uses:

    ZAP CA Is the thinnest CA in the ZAP product line. The penetrating or wicking ability of this glue makes it a favorite of modelers around the world. Balsa wood is bonded almost instantaneously, with the glue sometimes traveling several inches into the parts. The consistent performance and strength of the glue is what sets it apart from other brands. This product is also widely used throughout the hobby industry; the thin formula allows the glue to go where most cannot. Some uses besides hobbies and crafts include; jewelry manufacturing and repair, taxidermy, mold and pattern making, furniture refinishing and antique repair, auto detailing, archery, darts, dental molds and patterns, and ceramic repair. Wood turners like the penetrating ability for hardening soft areas and preventing the propagation of cracks. Furniture refinishers can count on ZAP CA to wick under loose veneer without having to remove the piece and chance damage. Mold and pattern shops coat the outside of the wood pattern, hardening it for final finishing. Cracks almost disappear in ceramic and hardened plaster pieces. Use it on fiberglass and cloth to bond, reinforce, and strengthen wood parts and assemblies. Plastic parts can be joined with an almost invisible seam.

    Helpful Hints: 

    This glue is FAST!! It travels fast and sets up fast. It will bond skin instantly. Because of this glues wicking ability it will travel along an edge or seam for several inches. It will penetrate deep in to a crack just by applying the glue at one end. When bonding balsa wood, hold the parts together and apply a small amount of glue at the seam where the parts meet. The glue will penetrate the joint and wick into the balsa parts. Don’t hold the balsa to close to the joint or you will find that you are glued to your parts. For porous products you may have to apply more glue to get the strongest bond, it would be best to try bonding some test pieces to determine the proper amount. When sealing and hardening wood parts use in a well ventilated area and work on small sections. Do not use kicker with this glue, in most cases the glue will have set before you can apply the accelerator. For critical applications test sample joints for designed strength requirements.

    Learn More
Desc

Items 1-9 of 12

View as Grid List
per page
To Top