HYSOL

HYSOL

Hysol Aerospace Grade Epoxy by Loctite

Desc

Items 1-9 of 14

View as Grid List
per page
  1. Hysol E-00NS
    $15.95
    Hysol E-00NS

    The Hysol E-00NS is a fast setting, non-sagging, thixotropic, industrial grade epoxy adhesive.


         Features:

    •         1:1 mix ratio
    •         5-minute worklife
    •         Cures at room temperature to form a translucent, rigid, machinable bond-line
    •         Resistant to a wide range of chemicals and solvents
    •         Acts as an excellent electrical insulator
    •         Typical applications include bonding plastic, metal, glass, wood, ceramic, rubber, and masonry materials
    •         Especially suited for use on vertical surfaces to avoid run-off
    •         Designed for use in component assembly, appliances, electronics, & fiber optics

       Specifications:

    •         Container: 50mL dual cartridge
    •         Color: Clear colorless to slightly yellow liquid
    •         Chemical type (resin): Epoxy
    •         Chemical type (hardener): Mercaptan
    •         Temperature range: Room temperature cure after mixing
    •         Full cure speed: 12 hours
    Learn More
  2. Hysol 1:1 Plunger
    $7.00
    Hysol 1:1 Plunger

    Hysol 1:1 Plunger

    1:1 ratio plunger for Hysol. Fits the Dreamworks and most Loctite Glue guns.

    Replacement for standard glue guns with dual cartridge.

     

     

    Learn More
  3. Hysol E-20HP 5 Pack
    $73.00
    Hysol E-20HP 5 Pack

    E-20HP (also known as VPOXY ) Aerospace Grade Epoxy

    Hysol 9462  vs  E-20HP - the differences

    • Hysol 9462 is white, E-20HP is clear
    • Hysol 9462 is totally thixotropic - i.e. it will not run or sag. E-20HP is slightly less thixotropic - thus it may penetrate some materials better.
    • Hysol 9462 initial setup time is about 3 hours at 75°F. E-20HP initial setup time is about 1 hour at 75°F.
    • Technical data on the strength properties of both glues render them about the same.
    • Hysol 9462 and/or E-20HP are Aerospace grade adhesives and the strongest epoxy based glues available to the modeler.

    Dreamworks has been using this Aerospace grade glue years, bonding sub assemblies on our UAV's and Target Drones.
    Note: E-20HP requires our 2:1 plunger if you already have an Hysol dispenser gun.

    Item sold in cost savings 5 pack!

    Learn More
  4. Hysol 608 5 Pack
    $61.50
    Hysol 608 5 Pack

    Hysol Epoxy Adhesive, High Strength is a fast setting, high strength, medium viscosity, low odor adhesive with a 5-minute worklife. Cures at room temperature to form a clear bondline. Easy-to-use 1:1 mix ratio.

    Hysol 608 is a clear, fast setting epoxy adhesive used
    in many applications where optical clarity and/or fast cure rates
    are needed. Hysol 608 bonds a variety of materials including
    metals and plastics.

    Features:

        Clear
        Easy to Mix
        1:1 Mix by Weight and Volume
        Quick Set
        High Strength

        Room Temperature or Heat Cure
     

     

    Item sold in cost savings 5 pack!

    Learn More
  5. Hysol 608
    $14.25
    Hysol 608

    Hysol Epoxy Adhesive, High Strength is a fast setting, high strength, medium viscosity, low odor adhesive with a 5-minute worklife. Cures at room temperature to form a clear bondline. Easy-to-use 1:1 mix ratio.

    Hysol 608 is a clear, fast setting epoxy adhesive used
    in many applications where optical clarity and/or fast cure rates
    are needed. Hysol 608 bonds a variety of materials including
    metals and plastics.

     

    Features:

    • Clear
    • Easy to Mix
    • 1:1 Mix by Weight and Volume
    • Quick Set
    • High Strength
    • Room Temperature or Heat Cure

    Item sold individually

    Learn More
  6. Hysol 9462 5 Pack
    $72.50
    Hysol 9462 5 Pack

    Turbine powered aircraft deserve the best aerospace grade adhesive product available and Hysol 9462 is it! Our Hysol is a thixotropic, slow cure, aerospace grade, 2-part epoxy system that is perfect for bonding wood, fiberglass, plastic and metal. Also known as Aeropoxy.

    Dreamworks has been using this Aerospace grade glue for years, bonding sub assemblies on our UAV's and Target Drones .

    Five 50ML Dual feed cartridge
     

    Item sold in cost savings 5 pack!

    Learn More
  7. Hysol Hand Plunger
    $4.95
    Hysol Hand Plunger

    Hysol Hand Plunger

    Economic Hand Plunger for dispensing Hysol 9462 and other 1:1 glues

    Learn More
  8. Hysol 2:1 Plunger
    $7.00
    Hysol 2:1 Plunger

    Hysol 2:1 Plunger

    2:1 ratio plunger for Hysol and Vpoxy Glues. Fits the Dreamworks and most  Loctite Glue guns.

    Note: For 2:1 plunger to fit the Dreamworks Glue Gun, Minor modification to the gun is necessary. You must dremel the large side plunger pocket to clear the plunger. A one minute modification. Please see the "Images" tab above for clarification.

     

     

    Learn More
  9. Hysol E-20HP
    $15.50
    Hysol E-20HP

    E-20HP (also known as VPOXY ) Aerospace Grade Epoxy

     

    Hysol 9462  vs  E-20HP - the differences

     

    • Hysol 9462 is white, E-20HP is clear
    • Hysol 9462 is totally thixotropic - i.e. it will not run or sag. E-20HP is slightly less thixotropic - thus it may penetrate some materials better.
    • Hysol 9462 initial setup time is about 3 hours at 75°F. E-20HP initial setup time is about 1 hour at 75°F.
    • Technical data on the strength properties of both glues render them about the same.
    • Hysol 9462 and/or E-20HP are Aerospace grade adhesives and the strongest epoxy based glues available to the modeler.

     

    Dreamworks has been using this Aerospace grade glue for years, bonding sub assemblies on our UAV's and Target Drones 
    Note: E-20HP requires our 2:1 plunger if you already have an Hysol dispenser gun.

     

    Learn More
Desc

Items 1-9 of 14

View as Grid List
per page
To Top