AIR TRAPS

AIR TRAPS

 Air Traps prevent any air bubbles from reaching the turbine, thus preventing a potential flame-out .

Desc

Items 1-9 of 27

View as Grid List
per page
  1. Intairco High Flow iTrap Telemetry 250ml (8.8floz)
    $245.00
    Intairco High Flow iTrap Telemetry 250ml (8.8floz)

    Intairco iTrap Tel 60 Dual Inlet, Barb Fittings - Suit XLarge Tygon and 8mm OD Festo Tube

    New version does not require seperate mount.


    Intairco brings you the iTrap Tel 60

    The World’s First Intelligent Air Trap!!

    Just imagine if you could have an alarm notification on your transmitter to warn you that you were collecting air in your Air Trap allowing you to make a safe landing to investigate the cause…… long before that inevitable flame out.

    Well now this is possible thanks to Intairco’s innovatively designed iTrap Tel with Fuel Sensing!

    The iTrap Tel has an internal electronic sensor. Once the surface of this sensor is exposed to air it sends a signal to the Telemetry Interface Module (iTM) that in turn is connected into the radio’s proprietary telemetry network.

    The iTM that is supplied with the iTrap Tel is compatible with Futaba, Jeti, JR, Multiplex and Spektrum Radio Systems that are equipped with Telemetry Receivers.

    Other great features of the iTrap include an integral mounting system as well as an innovative internal Tie Bolt Stem design allowing complete disassembly by the owner if required.

    And of course, it still features our proven SS Diffuser as used so successfully in our Super Traps.

    Specifications:

    Nominal Capacity: 250ml (8.8fl oz)

    Length: 110mm (4.3in)

    Width: 64mm (2.5in)

    Height: 64mm (2.5in)

    Dry Weight: 170g (6oz)

    Compatibility: Futaba, Jeti, JR, Multiplex & Spektrum

    Learn More
  2. Intairco High Flow iTrap Telemetry 175ml (6.0floz)
    $235.00
    Intairco High Flow iTrap Telemetry 175ml (6.0floz)

    Product Description:

    New version does not require seperate mount.

    Intairco iTrap Tel 50, Barb Fittings - Suit XLarge Tygon and 6mm Festo Tube

    Intairco brings you the iTrap Tel 50

    The World’s First Intelligent Air Trap!!

    Just imagine if you could have an alarm notification on your transmitter to warn you that you were collecting air in your Air Trap allowing you to make a safe landing to investigate the cause…… long before that inevitable flame out.

    Well now this is possible thanks to Intairco’s innovatively designed iTrap Tel with Fuel Sensing!

    The iTrap Tel has an internal electronic sensor. Once the surface of this sensor is exposed to air it sends a signal to the Telemetry Interface Module (iTM) that in turn is connected into the radio’s proprietary telemetry network.

    The iTM that is supplied with the iTrap Tel is compatible with Futaba, Jeti, JR, Multiplex and Spektrum Radio Systems that are equipped with Telemetry Receivers.

    Other great features of the iTrap include an integral mounting system as well as an innovative internal Tie Bolt Stem design allowing complete disassembly by the owner if required.

    And of course, it still features our proven SS Diffuser as used so successfully in our Super Traps.

    Specifications:

    Nominal Capacity: 175ml (6fl oz)

    Length: 85mm (3.3in)

    Width: 55mm (2.2in)

    Height: 55mm (2.2in)

    Dry Weight: 140g (5oz)

    Compatibility: Futaba, Jeti, JR, Multiplex & Spektrum

    Learn More
  3. Flight Composite Tech (FCT) Clear UAT 200ml
    $165.00
    Flight Composite Tech (FCT) Clear UAT 200ml

    Introducing the Innovative Flight Composite Tech (FCT) UAT. Cylinder Type - CLEAR 200ml(7.039oz)

    Expertly constructed by FCT utilising High Tech CNC Machining.

    Air Traps in Turbine Fuel Systems are designed to catch any air bubbles which can cause Flame Outs if they reach the Turbine.

    The centrally located fuel pick up incorporates the standard fine mesh type filter that is easily replaced and serviced.

    As this design of UAT acts as a filter It is also important to be able to easily clean the filter, this is not something which can be easily achieved with currently available UATs.  Either the whole UAT has to be replaced or a seal broken and remade.  With this UAT ease of cleaning is designed in.
    And the unit reassembled easily as a self sealing 'O' Ring is included on the neck of the screwed fittings.

    Key Features:


    •clear Polycarbonate tube Anodised Aluminium Components - 200ml
    • High Quality Mounting Brackets with Hardware.
    • The whole front fuel nipple assembly is easily unscrewed.
    • 4mm fuel supply nipple. (fits Standard 1/8" Tygon).
    • 6mm vent and fuel feed nipples. (Fits Large 3/16" Tygon).
    • Compression Type Barbed Fittings.

    Dimensions: 

    • Diameter 50mm(1.969").
    • Length 120mm(5.969")Including Fittings.
    • Weight w/Brackets 116g (4.1/8oz.)
    Learn More
  4. Flight Composite Tech (FCT) Clear UAT 100ml
    $140.00
    Flight Composite Tech (FCT) Clear UAT 100ml

    Introducing the Innovative Flight Composite Tech (FCT) UAT. Cylinder Type - CLEAR 100ml (3.38oz)

    Expertly constructed by FCT utilising High Tech CNC Machining and the latest  construction techniques.

    Air Traps in Turbine Fuel Systems are designed to catch any air bubbles which can cause Flame Outs if they reach the Turbine.

    The centrally located fuel pick up incorporates the standard "fine mash " type filter that is easily replaced and serviced.

    As this design of UAT acts as a filter It is also important to be able to easily clean the filter, this is not something which can be easily achieved with currently available UATs.  Either the whole UAT has to be replaced or a seal broken and remade.  With this UAT ease of cleaning is designed in.
    And the unit reassembled easily as a self sealing 'O' Ring is included on the neck of the screwed fittings.

    Key Features:
    • Clear polycarbonate tube Anodised Aluminium Components - 100ml
    • High Quality Mounting Brackets with Hardware.
    • The whole front fuel nipple assembly is easily unscrewed.
    • 4mm fuel supply nipple. (fits Standard 1/8" Tygon).


    • 6mm vent and fuel feed nipples. (Fits Large 3/16" Tygon).
    • Compression Type Barbed Fittings.

    Dimensions: 

    • Diameter 40mm (1.57").
    • Length 115mm (4.5") Including Fittings.
    • Weight w/Brackets 70g (2.1/2oz.)
    Learn More
  5. Intairco Replacement M7 Barb Fittings - Suit XL Tygon and 8mm OD Festo Tube
    $3.95
    Intairco Replacement M7 Barb Fittings - Suit XL Tygon and 8mm OD Festo Tube

    Intairco Replacement M7 Barb Fittings - Suit XL Tygon and 8mm OD Festo Tube

    Learn More
  6. Intairco Super Trap Replacement Filter
    $20.99
    Intairco Super Trap Replacement Filter

    Intairco Super Trap Replacement Filter

    Super-Flow Sintered Filter

    Learn More
  7. Intairco Horizontal Mount for 175ml Air Trap
    $23.50
    Intairco Horizontal Mount for 175ml Air Trap

    Intairco Horizontal Mount for 175ml Air Trap (sold seperatly).

    CNC Machined Alloy Mount for the new Super Flow Series Air Traps by Intairco.

    Alows Horizontal Mounting Option, complete with mounting hardware.

    Learn More
Desc

Items 1-9 of 27

View as Grid List
per page
To Top