UniLight Lighting

UniLight Lighting

Visible aircraft lighting also at daylight?
Strobe light and no functional disturbances?
Easy to mount, easy to operate?
Reasonable price and high quality?

... THAT IS uniLIGHT !

Desc

Items 1-9 of 195

View as Grid List
per page
  1. UniLight Wing Wiring Kit 3.0m
    $18.00
    UniLight Wing Wiring Kit 3.0m

    Wing Wiring Kit - 3.0 Meter

    Optimized wiring of lightsystems with wings. NEW ! cable with different profile causes the best performancce on minimal weight.This 4-pole cable is made out of a very strong live wire, neutral wire for the main load(Strobe/Spotlight) and two thin conducter for side-functions.

    Two cables for wings made from 4-pole Teflon for combilights and spotlights and connector, coding: orange, black, gray, white.

     

    Learn More
  2. UniLight Wing Wiring Kit 2.0m
    $15.00
    UniLight Wing Wiring Kit 2.0m

    Wing Wiring Kit - 2.0 Meter

    Optimized wiring of lightsystems with wings. NEW ! cable with different profile causes the best performancce on minimal weight.This 4-pole cable is made out of a very strong live wire, neutral wire for the main load(Strobe/Spotlight) and two thin conducter for side-functions.

    Two cables for wings made from 4-pole Teflon for combilights and spotlights and connector, coding: orange, black, gray, white.

     

    Learn More
  3. UniLight Night MEDIUM Connection Set
    $45.00
    UniLight Night MEDIUM Connection Set

    MEDIUM Connection Set

    Set for easy mounting and contacting the MEDIUM DIY set. The set includes safety mounting plates, which, in addition to the mechanical mountings, contain a second circuit with a red and a green limiting light. Thus, in case of a defect still the fundamental position recognition remains, a new safety feature for the night flight!

    uniLIGHT Night Blades

        Compact size with maximum performance
        Lowest impact on flight behavior
        New cable and plugless installation
        Optimized, adjustable cooling reflector
        Reduced self-glare
        5 sizes for all standards
        especially for wings and symmetrical for the tail unit
        Asymmetric design for maximum ruggedness
        Safety holder with position light available
        large systems as cable and autonomous battery version

    Assembly and operation

        First, the enclosed, small contact plate is firmly glued into the edge of the wings, sides or on the elevator, preferably with good epoxy and optional pinnacles. Make sure that the writing on the contact plates is readable so that the polarity is correct. In the top view, right is always plus.
        The connection cable is guided centrally within the surface to the fuselage. All Night Blades can simply be operated in parallel on a 2S LiPo battery or on any uniLIGHT lighting control. Pay attention to the zuelssige current load and sufficient battery capacity, a shutdown at deep discharge could be fatal at night!
        For commissioning, the Night-Blade is simply placed on the mounting plate with the two screws and tightened, the electrical contact succeeds automatically. Make sure that the labels are always readable.
        The reflector surfaces are bent once so that the largest possible part of the light emission is directed to the model. ATTENTION: the reflector surfaces harden and can only be bent a few times. Fix the glued surface before you align the surfaces by hand or a small pliers to prevent breakage of the splice.
        After the flight, the Night Blades can simply be unscrewed and easily transported. There is no trace left of the night flight system.

    Technical specifications

    Construction: 1.5mm fiberglass carrier
    Overall size: 7.5x57 / 80mm
    Delivery: three mounting plates for the wireless connection of two wing blades and a tail blade, 1m connection cable, ready-made for direct operation on 2S LiPo and any uniLIGHT light control

     

    Learn More
  4. UniLight Nightfly Blade DIY Set for Medium size (up to 2m) Model
    $120.00
    UniLight Nightfly Blade DIY Set for Medium size (up to 2m) Model

    Unilight DIY set for most models with up to 2 meters span. The set consists of two wing blades for the wings and a tail balde for the tail and rear fuselage.

    There are no mounting plates included. Optionally there is the safety connection set NIGHT-M-CONRG.

    Note: Does not include wiring, battery or controller module. Light Fixtures Only.


    MEDIUM DIY set, up to 2m

    The set consists of two wing wings for the wings and a tail for the rear and rear fuselage.

    There are no mounting plates included. Optionally there is the safety connection set NIGHT-M-CONRG.

    uniLIGHT nightblades:

    • Compact size with maximum performance
    • Lowest influence on flight behavior
    • New cable and plugless installation
    • Optimized, adjustable cooling reflector
    • Reduced self-glare
    • 5 sizes for all standards
    • especially for wings and symmetrical for the tail unit
    • Asymmetrical design for maximum robustness
    • Safety holder with position light available
    • large systems as cable and autonomous battery version

    Assembly and operation:

    First, the enclosed, small contact plate is glued firmly in the edge of the wings, sides or the elevator, preferably with good epoxy resin and optional battlements. Make sure that the lettering on the contact plates is readable so that the polarity is correct. In the plan view is always plus.
    The connection cable is guided centrally within the surface to the fuselage. All Night Blades can simply be operated in parallel on a 2S LiPo battery or on a uniLIGHT light control. Pay attention to the permissible current load and sufficient battery capacity, a shutdown at deep discharge could be deadly at night!
    For commissioning, the Night Blade is simply placed on the mounting plate with the two screws and tightened, the electrical contact is made automatically. Make sure the labels are always readable.
    The reflector surfaces are bent once, so that as much of the light emission as possible is directed towards the model. ATTENTION: The reflector surfaces harden and can only be bent a few times. Secure the adhesive surface before you align the surfaces by hand or with a small pair of pliers to prevent breakage of the splice.
    After the flight the Night Blades can simply be unscrewed and easily transported. There is no trace left of the night flight system.

    Technical specifications:

    • Construction: 1.5mm fiberglass carrier
    • Electric: 8V, 1.4A / 0.65A
    • Light intensity: ~ 900/550 lumens WHITE
    • Overall dimensions: 210x57mm and 150x36mm
    • Weight: 2x28g, 1x12g
    • Delivery: ready for immediate use on 2S LiPo and uniLIGHT lighting control

     

    Learn More
  5. UniLight 20mm Drop-Out Spotlight HV, REVERSE, 4x2W
    $97.00
    UniLight 20mm Drop-Out Spotlight HV, REVERSE, 4x2W

    20mm Drop-Out Spotlight HV, REVERSE, 4x2W

    Our new series of folding mechanisms allows usage of powerful spotlights for folding out. Modelled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Whether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment. Now with diamond HV servos which is approbated for each system.

    AUXILIARY spotlights folds out against the direction of the flight. In driven state is only the backside visable, not the reflector.

    Flat 20mm 8Wx2 spotlights are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A diamond HV servo is integrated in the mechanics. The assemblys are already built, it's possible that it's needed to glue the base plate together.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Diamond HV servo included
        Pre-assembled

    Technical data

    Performance: 2x4W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.35A
    Beam angle: ~100°
    Light Intensity: 100x2 Lumen WHITE
    Light Intensity: 95x2 Lumen WARMWHITE
    Weight: 20g (Servo included)
    Dimension: 52x22mm, Height 12,5mm

     

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  6. UniLight 20mm Drop-Out Spotlight HV, 4x2W
    $95.00
    UniLight 20mm Drop-Out Spotlight HV, 4x2W

    20mm Drop-Out Spotlight HV, 4x2W

    Our new series of folding mechanisms allows usage of powerful spotlights for folding out. Modelled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Whether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment. Now with diamond HV servos which is approbated for each system.


    Flat 20mm 8Wx2 spotlights are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A diamond HV servo is integrated in the mechanics. The assemblys are already built, it's possible that it's needed to glue the base plate together.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Diamond HV servo included
        Pre-assembled

    Technical data

    Performance: 2x4W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.35A
    Beam angle: ~100°
    Light Intensity: 100x2 Lumen WHITE
    Light Intensity: 95x2 Lumen WARMWHITE
    Weight: 22g (Servo included)
    Dimension: 53x22mm, Height 13,5mm

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  7. UniLight 16mm Drop-Out Spotlight HV, REVERSE, 4x2W
    $85.00
    UniLight 16mm Drop-Out Spotlight HV, REVERSE, 4x2W

    16mm Drop-Out Spotlight HV, REVERSE, 4x2W

    Miniatur spotlights for folding out. Modelled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Whether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment. Now with diamond HV servos which is approbated for each system

    AUXILIARY spotlights folds out against the direction of the flight. In driven state is only the backside visable, not the reflector

    Flat 16mm spotlights HighGrade are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A diamond HV servo is integrated in the mechanics. The assemblys are already built, it's possible that it's needed to glue the base plate together.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Diamond HV servo included
        Pre-assembled

    Technical data

    Performance: 2x4W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.35A
    Beam angle: ~100°
    Light Intensity: 100x2 Lumen WHITE
    Light Intensity: 95x2 Lumen WARMWHITE
    Weight: 18g (Servo included)
    Dimension: 53x22mm, Height 12,5mm

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  8. UniLight 1.2W Aluminium-Round Light, 12mm Green
    $17.00
    UniLight 1.2W Aluminium-Round Light, 12mm Green

    1.2W Aluminium-Round Light, 12mm GREEN


    Technical Data

    Electricity: up to 1.2W reference power, 10-14V
    Beam angle: ~160°
    Luminous flux: ~30-40lm
    Dimension: 12x17mm
    Weight: 4g (without cable)
    Delivery: 1m connection cable included

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  9. UniLight 1.2W Aluminium-Round Light, 12mm Red
    $17.00
    UniLight 1.2W Aluminium-Round Light, 12mm Red

    1.2W Aluminium-Round Light, 12mm RED


    Technical Data

    Electricity: up to 1.2W reference power, 10-14V
    Beam angle: ~160°
    Luminous flux: ~30-40lm
    Dimension: 12x17mm
    Weight: 4g (without cable)
    Delivery: 1m connection cable included

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
Desc

Items 1-9 of 195

View as Grid List
per page
To Top