CONTROL MODULES

CONTROL MODULES
Desc

5 Items

View as Grid List
per page
  1. UniLight Controller Pack 7.2v 2900 mah 2s1p- Li-ion pack
    $38.95
    UniLight Controller Pack 7.2v 2900 mah 2s1p- Li-ion pack

    Custom battery pack for UniLight Controller lighting system - 7.2v - 2900 mah - 2s1p- Li-ion pack w/6" 22 ga wire & JST connector, voltage test lead & JST/XH balance tap

    Flight weight: 3.9oz (110 grams)
    Size: 2.75 x 1.5 x .75in (7 x 3.8 x 2cm)
    Discharge Amperage: 5.2Amp (2C)
    Charge Rate: 3 Amp (1c)

    Learn More
  2. UniLight Controller 2-Channel
    $33.00
    UniLight Controller 2-Channel

    uniLIGHT BLACK.2

    State of the art light controller: BLACK-Series

    Our 2-channel module is the small entry-level version into the uniLIGHT system. It is easy to use and brings brilliant and fast results for all model ranges. The main application covers the use of an ACL or BEACON light, NAV lights with or without strobe function and switchable landing lights.

    New in BLACK Series:

    •     Dynamic nicer, faster and sharper defined light effects
    •     Dimensions reduced size and weight, optimized for 2-channel applications
    •     Safety basic short cut protection, cut off and automatic restore
    •     Battery deep discharge protection for connected Lipos
    •     Master-Slave Operation no switch in power circuit necessary, activation by the receiver channel
    •     Scale now with B.2 module soft transition selectable
    •     Sport Navigation and strobe special function for many sport applications

    Technical Data:

    •     receiver side 4.8-9.6V
    •     weight ~3g, without wire
    •     dimension 45x22x6mm
    •     load per channel 1.5A to 16V (3A peak)
    •     total load up to 3A
    •     galvanically isolated circuits
    •     operation without RC possible
    •     15 effects with variable speed
    •     short circuit protection
    •     deep discharge protection

    Special Function:

    •     Slow Signals a soft transition simulates a soft glow-on and glow-off like an old glow bulb or simulates a rotating beacon effect of slow blinking functions.
    •     Fast Signals during strobe sequences a basic level of around 20% power is given to the light. With these function a strong strobe light can be operated as navigation light AND at the same time be a strobe signal. Perfectly usable on sport models: one light, two functions!
       
    Learn More
  3. UniLight Controller 1-Channel
    $28.00
    UniLight Controller 1-Channel

    uniLIGHT BLACK.1

    One-Channel state of the at light controller: BLACK-Series

    The BLACK.1 controller is a nice the solution for simplest applications. It’s made for single functional jobs like navigation-, blink-, strobe/ACL or spotlights in easy models. Usually without the need of a receiver channel - but this is optional possible. The controller is directly connected to a 2S/3S Lipo. In programming mode it’s possible to select a free light schema, which is used automatically in future. If plugged to a receiver, the light schema can be selected by the transmitter.

    Simplest solution for position flashlights on gliders and sport models, navigation lights on multicopters, spotlights for horizon signals on jets,...

    The B.1 controller can also be used in combination with existing uniLIGHT controllers as power stage for spotlights, channel extension, special effects...

    New in BLACK Series:

    •     Dynamic nicer, faster and sharper defined light effects
    •     Dimensions reduced size and weight, optimized for 2-channel applications
    •     Safety basic short cut protection, cut off and automatic restore
    •     Battery deep discharge protection for connected Lipos

    Technical Data:

    •     receiver side 4.8-9.6V
    •     weight ~1.5g, without wire
    •     dimension 45x14x6mm
    •     3A to 16V (5A peak)
    •     operation without RC possible
    •     11 effects with variable speed
    •     short circuit protection
    •     deep discharge protection
       
    Learn More
  4. UniLight Controller 8-Channel PRO
    $79.00
    UniLight Controller 8-Channel PRO

    UniLight Controller 8-Channel PRO

    The system for all tasks!

    The 8-Channel Module offers universal use for all lighting tasks in functional model-making. Up to 8 electrical- and lighting circuits can be implemented and thereby, two different operating voltages can be used. Via a Windows PC, you can program the module with our software per USB. For each channel five freely programmable light sequences are programmable, which can be selected via servo travel from -100% to +100%. Additionally, the speed of the light effect can be configured on the module depending on personal taste and on the scale of the model.

    Technical data

        Control side receiver 4.8-9.6V
        Only ca. 18g (without cable)
        Dimension: 50x60x8mm
        Light signals 8 Channels with 3A to 30V, pulse load up to 5A
        Total load up to 2x5A
        Galvanically isolated circuits
        Operation possible without RC signal
        Smooth shifting programmable
        Freely programmable effects sequences
        2 programmable servo outputs for landing lights, undercarriage or fireworks
        2 permanent and 5 freely programmable light sequences for selection, all with variable speed
        Freely available Windows configuration software
        Assistence function for production of standard light signals
        Storing and exchanging of profiles


    Demo

    Windows configuration tool

    Learn More
  5. UniLight Module Afterburner
    $42.00
    UniLight Module Afterburner

    UniLight Module Afterburner

    Afterburner-Simulation with unmatched performance

    Our 2-Channel Afterburner Module is especially designed for very powerful afterburner rings and generates besides the typical "flickering" effects even more additional functions.
    Like all uniLIGHT modules, the function selection is made via servo travel and via parts of it respectively. The receiver selects the performance and additionally, the speed of the effect can be selected on the button.

    Functions for MAIN
    This is the main channel for the afterburner ring. The contacts are provided twice and internal switched in parallel to carry the required current. Switch the contacts ALWAYS ONLY in parallel by connecting both cables of the ring homopolar. The main channel will then simulate the afterburner function.

    Functions for BOOST
    The second channel can be used for another functional enhancement (boost) and is beeing patched in in the top sector of the servo travel. This means that a second afterburner ring can be patched in. In addition, a pump can be triggered to inject smoke or fluid.


    Technical Data:

    •     Control side receiver 4.8-9.6V
    •     Only about 12g without cable
    •     Dimension: 50x35x8mm
    •     Light signals 2x2 Channels with 8A to 30V
    •     Total load up to 12A
    •     galvanically isolated circuits
    •     4 operating modes with 9 different steps
    Learn More
Desc

5 Items

View as Grid List
per page
To Top