DROPOUT SPOTLIGHTS

DROPOUT SPOTLIGHTS
Desc

4 Items

View as Grid List
per page
  1. UniLight 16mm Drop-Out Spotlight HV, 4W
    $90.00
    UniLight 16mm Drop-Out Spotlight HV, 4W

    16mm Drop-Out Spotlight HV, 4W

    Miniatur spotlights for folding out. Modelled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Whether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment. Now with diamond HV servos which is approbated for each system


    Flat 16mm spotlights HighGrade are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A diamond HV servo is integrated in the mechanics. The assemblys are already built, it's possible that it's needed to glue the base plate together.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE
        Diamond HV servo included
        Pre-assembled

    Technical data

    Performance: 4W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.35A
    Beam angle: ~100°
    Light Intensity: 110 Lumen WHITE
    Light Intensity: 100 Lumen WARMWHITE
    Weight: 19g (Servo included)
    Dimension: 51x22mm, Height 13,5mm

     

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  2. UniLight 40mm Drop-Out Spotlight 8Wx2 White
    $115.00
    UniLight 40mm Drop-Out Spotlight 8Wx2 White

    40mm Drop-Out Spotlight 8Wx2, T-Fuse - White

    Our new series of folding mechanisms allows useage of powerful spotlights for folding out. Modeled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Wether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment.


    Flat 40mm 8Wx2 spotlights with temperature protection are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A Savöx SH-0254 is integrated in the mechanics, which means you only have to define the mounting position and push rod. The construction with the enclosed parts allows two different mounting positions of the rotation axis to the servo: behind the axis or above the axi for fuslage mounting.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection
        Savöx SH-0254 included
        Pre-assembled
        Various mounting positions!

    Technical Data:

    Performance: 2x8W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.7A
    Abstrahlwinkel: ~100°
    Light Intensity: 200x2 Lumen WHITE
    Light Intensity: 180x2 Lumen WARMWHITE
    Weight: 50g (Servo included)

    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  3. UniLight 35mm Drop-Out Spotlight 8Wx2 White
    $110.00
    UniLight 35mm Drop-Out Spotlight 8Wx2 White

    35mm Drop-Out Spotlight 8Wx2, T-Fuse - White

    Our new series of folding mechanisms allows useage of powerful spotlights for folding out. Modeled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Wether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment.


    Flat 35mm 8Wx2 spotlights with temperature protection are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A Savöx SH-0254 is integrated in the mechanics, which means you only have to define the mounting position and push rod. The construction with the enclosed parts allows two different mounting positions of the rotation axis to the servo: behind the axis or above the axi for fuslage mounting.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection
        Savöx SH-0254 included
        Pre-assembled
        Various mounting positions!

    Technical Data

    Performance: 2x8W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.7A
    Abstrahlwinkel: ~100°
    Light Intensity: 200x2 Lumen WHITE
    Light Intensity: 180x2 Lumen WARMWHITE
    Weight: 50g (Servo included)

    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  4. UniLight 30mm Drop-Out Spotlight 8Wx2 White
    $105.00
    UniLight 30mm Drop-Out Spotlight 8Wx2 White

    30mm Drop-Out Spotlight 8Wx2, T-Fuse - White

    Now with DYMOND DS 2820 MG Digital High Voltage Servo!

    Our new series of folding mechanisms allows useage of powerful spotlights for folding out. Modeled after real airplanes, drop-out spotlights are now easily and quickly realisable in model aircrafts. Wether for optical reasons or as an additional brake flap, a drop-out spotlight is an enormous enrichment.

    Flat 30mm 8Wx2 spotlights with temperature protection are used for our pre-assembled spotlights. They allow enormous luminous power in small dimensions. A DYMOND Servo is integrated in the mechanics, which means you only have to define the mounting position and push rod. The construction with the enclosed parts allows three different mounting positions of the rotation axis to the servo: in front of the axis, behind the axis or above the axi for fuslage mounting.

        Spotlights of high-quality aluminium reflector
        Wide angle beam: 110°
        Completely made of massive aluminium, CNC manufactured
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection
        DYMOND DS 2820 MG Servo included
        Pre-assembled
        Various mounting positions!

    Technical Data

    Performance: 2x8W reference power
    Voltage: 8V, use enclosed resistor for 12V!
    Electricty: 0.7A
    Abstrahlwinkel: ~100°
    Light Intensity: 200x2 Lumen WHITE
    Light Intensity: 180x2 Lumen WARMWHITE
    Weight: 50g (Servo included)

    Assembly BEHIND Axis
    Dimension: 97.5x40mm, Height 18.5mm
    or freely hanging: 62.5x40mm, Height 18.5mm

    Assembly IN FRONT OF Axis
    Dimension: 97.5x40mm, Height 18.5mm

    Assembly ABOVE Axis
    Dimension: 69x40mm, Height 38mm

    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
Desc

4 Items

View as Grid List
per page
To Top