SPOTLIGHTS

SPOTLIGHTS
Desc

Items 1-9 of 17

View as Grid List
per page
  1. UniLight 4W Gears-Spotlight, 20mm
    $24.00
    UniLight 4W Gears-Spotlight, 20mm

    4W Gears-Spotlight, 20mm

    Flat spotlight with CNC manufactured aluminium reflector with 20mm diameter and assembly plate for horizontal cooling. Ideal on undercarriages or as pop-up spotlights. The enclosed heatsink can be glued on for improving operation time. The spotlight can be directly glued on the undercarriage leg with thermal conductive adhesive, then the mounting flange can be completely removed, so that only the reflector remains.

    Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 4W connection cable (accessories). Please ensure sufficient cooling air during operation.

    Technical Data

    Performance: 4W reference power
    Voltage: 8V, use enclosed resistor for 12V
    Electricity: 0.35A
    Beam angle: ~100°
    Light intensity: ~100 Lumen WHITE
    Light intensity: ~95 Lumen WARMWHITE
    Dimension: D20x39x9mm
    Weight: 7g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  2. UniLight 4W Gears-Spotlight, 16mm
    $24.00
    UniLight 4W Gears-Spotlight, 16mm

    4W Gears-Spotlight, 16mm

    Small spotlight with CNC manufactured aluminium reflector with 16mm diameter and assembly plate for horizontal cooling. Ideal on undercarriages or as folding spotlights. The enclosed heatsink can be glued on for improving operation time. The spotlight can be directly glued on the undercarriage leg with thermal conductive adhesive, then the mounting flange can be completely removed, so that only the reflector remains.

    Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a W connection cable (accessories). Please ensure sufficient cooling air during operation.

    Technical Data

    Performance: 4W reference power
    Voltage: 8V, use enclosed resistor for 12V
    Electricity: 0.35A
    Beam angle: ~100°
    Light intensity: ~100 Lumen WHITE
    Light intensity: ~95 Lumen WARMWHITE
    Dimension: D16x36x9mm
    Weight: 6g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  3. UniLight 16Wx2 Ultra-Power-Spotlight, 35mm
    $56.00
    UniLight 16Wx2 Ultra-Power-Spotlight, 35mm

    16Wx2 Ultra-Power-Spotlight, 35mm, T-Fuse White

    This 35mm category spotlight is suitable for all larger models and provides, on the basis of its enormous light power and wide angle beam, maximum visibility under all conditions. The enormous light power of the two extremely powerful emitter requires air cooling for continuous operation. If this is not the case, the integrated overtemperature protection switches off the spotlight after 3-4minutes through the sensor implemented in the heatsink.

    Ideal in tiptanks, hood or also as landing spotlight in big high-winger. Due to the short construction, they are perfectly suitable for fuselage nose.

        High-quality aluminium reflector
        Wide angle beam: 100°
        Completely made of massive aluminium, CNC manufactured
        x2-technology for doubling light intensity
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection

    Technical Data

    Performance: 2x8Wx2 reference power
    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Voltage: 8V, use enclosed resistor additionally for 12V!
    Electricity: max. 1.4A
    Beam angle: ~100°
    Light intensity: 2x400 Lumen WHITE
    Light intensity: 2x350 Lumen WARMWHITE
    Dimension: D35x31mm
    Weight: 2817g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  4. UniLight 8Wx2 Alu-Spotlight, 40mm
    $46.00
    UniLight 8Wx2 Alu-Spotlight, 40mm

    8Wx2 Alu-Spotlight, 40mm, T-Fuse White

    This innovative 40mm category spotlight is suitable for all larger models and provides, on the basis of its enormous light power and wide angle beam, maximum visibility under all conditions. The integrated overtemperature protection was implemented in the mounted heatsink. In the event of overloading, it switches off the spotlight.

    Ideal in tiptanks, hood or also as landing light in big high-winger. Due to the short construction, they are perfectly suitable for fuselage nose and drop down spotlight.

        High-quality aluminium reflector
        Wide angle beam: 100°
        Completely made of massive aluminium, CNC manufactured
        x2-technology for doubling light intensity
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection

    Technical Data

    Performance: 2x8W reference power
    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Voltage: 8V, use enclosed resistor additionally for 12V!
    Electricity: 0.7A
    Beam angle: ~100°
    Light intensity: 200x2 Lumen WHITE
    Light intensity: 180x2 Lumen WARMWHITE
    Dimension: D40x23mm
    Weight: 25g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  5. UniLight 8Wx2 Aluminium Spotlight, 30mm
    $41.00
    UniLight 8Wx2 Aluminium Spotlight, 30mm

    8Wx2 Aluminium Spotlight, 30mm, T-Fuse White

    This innovative 30mm category spotlight is suitable for all larger models and provides, on the basis of its enormous light power and wide angle beam, maximum visibility under all conditions. The integrated overtemperature protection was implemented in the mounted heatsink. In the event of overloading, it switches off the spotlight.

    Ideal in tiptanks, hood or also as landing light in big high-winger. Due to the short construction, they are perfectly suitable for fuselage nose and drop down spotlight.

        High-quality aluminium reflector
        Wide angle beam: 100°
        Completely made of massive aluminium, CNC manufactured
        x2-technology for doubling light intensity
        Available in WHITE and WARMWHITE
        Integrated overtemperature protection

    Technical data

    Performance: 2x8W reference power
    Overtemperature protection: switch-off and clocking of the light at 65-70°
    Voltage: 8V, use enclosed resistor additionally for 12V!
    Electricity: 0.7A
    Beam angle: ~100°
    Light intensity: 200x2 Lumen WHITE
    Light intensity: 180x2 Lumen WARMWHITE
    Dimension: D30x21mm
    Weight: 15g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  6. UniLight 8Wx2 Gears-Spotlight, UltraPower, 20mm
    $32.00
    UniLight 8Wx2 Gears-Spotlight, UltraPower, 20mm

    8Wx2 Gears-Spotlight, UltraPower, 20mm White

    Flat Ultra-Power spotlight with up to 400 Lumen, CNC manufactured aluminium reflector with 20mm diameter and assembly plate for horizontal cooling. Ideal on undercarriages or as pop-up spotlights. The enclosed heatsink should necessarily be glued on for cooling purposes. It is recommended to directly glue the spotlight on the undercarriage leg with thermal conductive adhesive, then heatsink and mounting flange can be completely removed, so that only the reflector remains. Attention: this Ultra-Power luminaire has no temperature protection, a wärmeschlüssige (?) connection to the carrier (undercarriage leg) is highly recommended.

    Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 8W connection cable (accessories). Please ensure sufficient cooling air during operation.

    Technical Data

    Performance: 4W reference power
    Voltage: 8V, use enclosed resistor for 12V
    Electricity: 0.7A
    Beam angle: ~100°
    Light intensity: ~400 Lumen WHITE
    Light intensity: ~350 Lumen WARMWHITE
    Dimension: D20x39x9mm
    Weight: 7g (without cable)
    Delivery: ready to use with 1m connection cable, heatsink and additional resistor for 3S operation

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  7. UniLight 8Wx2 Gears-Spotlight, 16mm
    $30.00
    UniLight 8Wx2 Gears-Spotlight, 16mm

    8Wx2 Gears-Spotlight, 16mm White

    Small Ultra-Power spotlight with up to 400 Lumen, CNC manufactured aluminium reflector with 16mm diameter and assembly plate for horizontal cooling. Ideal on undercarriages or as folding spotlights. The enclosed heatsink should necessarily be glued on for cooling purposes. It is recommended to directly glue the spotlight on the undercarriage leg with thermal conductive adhesive, then heatsink and mounting flange can be completely removed, so that only the reflector remains. Attention: this Ultra-Power luminaire has no temperature protection, a wärmeschlüssige (?) connection to the carrier (undercarriage leg) is highly recommended.

    Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 8W connection cable (accessories). Please ensure sufficient cooling air during operation.

    Technical Data

    Performance: 4W reference power
    Voltage: 8V, use enclosed resistor for 12V
    Electricity: 0.7A
    Beam angle: ~100°
    Light intensity: ~400 Lumen WHITE
    Light intensity: ~350 Lumen WARMWHITE
    Dimension: D16x36x9mm
    Weight: 6g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  8. UniLight 8Wx2 Gears-Spotlight, UltraPower, 26mm
    $31.00
    UniLight 8Wx2 Gears-Spotlight, UltraPower, 26mm

    8Wx2 Gears-Spotlight, UltraPower, 26mm White

    Flat Ultra-Power spotlight with up to 400 Lumen, CNC manufactured aluminium reflector with 26mm diameter. The spotlight must be glued directly on the gear leg with thermal conductive adhesive. Attention: this Ultra-Power luminaire has no temperature protection, a heat bridge connection to the carrier (undercarriage leg) is highly recommended.

    Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 8W connection cable (accessories). Please ensure sufficient cooling air during operation.

    Technical Data

    Performance: 8Wx2 reference power
    Voltage: 8V, use enclosed resistor for 12V, 0.7A
    Beam angle: ~100°
    Light intensity: ~400 Lumen WHITE
    Light intensity: ~350 Lumen WARMWHITE
    Dimension: D26x11mm
    Weight: 10g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
  9. UniLight 8Wx2 Ultra-Power Spotlight, 26mm
    $44.00
    UniLight 8Wx2 Ultra-Power Spotlight, 26mm

    8Wx2 Ultra-Power Spotlight, 26mm, T-Fuse White

    Compact ultrapower spotlight with up to 400 Lumen light power, CNC made high quality aluminium reflector with 26mm diamter.

    Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These 8W luminaires are not suitable for continuous operation without additional cooling, operation times of a few minutes are possible, designed for use als landing spotlight. Please check operation temperatures. The integrated temperature sensor will switch off the light in case of overheating.

    Technical Data

    Performance: 8Wx2 reference power
    Voltage: 8V, use enclosed resistor for 12V, 0.7A
    Beam angle: ~100°
    Light intensity: ~400 Lumen WHITE
    Light intensity: ~350 Lumen WARMWHITE
    Dimension: D26x23mm
    Weight: 12g (without cable)
    Delivery: ready to use with 1m connection cable and additional resistor for 3S operation

    With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.


    The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

    Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

    Note: The LED lights are extremely bright! Never look directly into a LED!

    Learn More
Desc

Items 1-9 of 17

View as Grid List
per page
To Top