Pipes & Nozzles

While we do stock some high volume Jet Pipes, Most are made to order. Pipes are non-returnable unless damaged or defective. Please allow 10-14days for special pipes to ship.

Desc

3 Items

View as Grid List
per page
  1. Multipurpose Aluminum Foil Tape
    $7.25
    Multipurpose Aluminum Foil Tape

    Multipurpose Aluminum Foil Tape  

    The highly reflective surface of this indoor/outdoor tape dissipates heat. Tape is also conformable, so it can be applied to irregular and curved surfaces. Great for protecting fiberglass and servo leads from engine/pipe heat.

    Specs:

    • Temperature range is -40° to +425° F
    • Apply at +30° to +120°  F.
    • Supplied on a cardboard spool with a 3" ID.
    • 0.003" thick tape has 0.002" thick aluminum foil with 0.001" of acrylic adhesive.
    • 2" Wide x 5 Yards
    Learn More
  2. Ceramic Blanket
    $19.95
    Ceramic Blanket

    Ceramic Blanket

    Protect your airframe with Dreamworks ceramic blanket. Shields heat up to 1260 degrees Celcius. Perfect protection in engine bays and pipe sections. Two 12" x 24" sheets per pack. We suggest high temp RTV for bonding blanket to surface.

    Specs:

    • 1mm thick
    • 12" x 24" sheets
    • Protects up to 1260C
    • 1.25oz per sheet
    Learn More
  3. Heat Shield
    $18.25
    Heat Shield

    High Temperature exhaust gases from both turbine and piston engines are sometimes unavoidably close to parts of the airframe. Tailpipes and mufflers contain the flame but the convective heat can be too much for the surrounding balsa, plastic, or fiberglass structures.

    Two to three brushed on coats of this water based, ceramic material, "Heat Shield" will protect those exposed parts of your model. Simply treat the inside of the engine cowl (piston engines) or the inside of the aft fuselage (turbine) and the surface temperature of the model will remain cool. In the unusual case of a turbine tailpipe fire on start up, you will have several seconds longer to extinguish it before any damage to the model occurs.

    Heat Shield comes in a 8oz can and is easily applied with a brush, clean up with soapy water. For extra protection the thickness can be built up with additional layers of fiberglass cloth and Heat Shield.

    Learn More
Desc

3 Items

View as Grid List
per page
To Top