Thermal Protection

Thermal barriers, protection and heat reflective products.

Desc

Items 1-9 of 10

View as Grid List
per page
  1. Cool-Tape – Heat Reflective Tape 1.5"x15' Roll
    $14.95
    Cool-Tape – Heat Reflective Tape 1.5"x15' Roll

    Cool-Tape – Heat Reflective Tape 1.5" x 15' Roll

    Cool Tape is a flexible and strong self-adhesive thermal insulating tape capable of protecting up to 400°F continuous heat. Made of one mil aluminized material bonded to a woven glass fiber matting, Cool Tape is a general use solution for sealing seams, covering irregular shapes, body panels, loose wires, cables, hoses, and fuel lines.

    Material: Aluminized reflective foil, with glass fiber and self adhesive backing
    Size:.012" thick
    Temperature Rating: 400°F Continuous, 2000°F radiant heat
    Color: Silver

    •     Withstands direct heat up to 400°F and 1500°F radiant heat
    •     Flexible and easy to apply
    •     Strong self-adhesive backing
    •     Use to secure panels, seal air boxes, wrap wiring & more
    •     MADE IN THE USA
       
    Learn More
  2. Cool Tube Extreme 1/2" x 3'-Black
    $18.30
    Cool Tube Extreme 1/2" x 3'-Black

    Cool Tube Extreme

    1/2" x 3'-Black

    Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme is flexible enough to conform to tight bends and provide superior protection against extreme temperatures, weather conditions and abrasions.

    Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.

    •         No need to remove wires, cables or hoses
    •         Can be slit lengthwise for easy install
    •         Easily trim to length
    •         Tough, durable with an easy to clean finish
    •         Reflects 750° F direct continuous heat
       
    Learn More
  3. Cool Tube Extreme 1/2" x 3'-Silver
    $12.95
    Cool Tube Extreme 1/2" x 3'-Silver

    Cool Tube Extreme

    1/2" x 3'-Silver

    Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme is flexible enough to conform to tight bends and provide superior protection against extreme temperatures, weather conditions and abrasions.

    Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.

    •         No need to remove wires, cables or hoses
    •         Can be slit lengthwise for easy install
    •         Easily trim to length
    •         Tough, durable with an easy to clean finish
    •         Reflects 750° F direct continuous heat
       
    Learn More
  4. Reflect-A-GOLD Heat Reflective Material   2"x15' Roll
    $39.95
    Reflect-A-GOLD Heat Reflective Material 2"x15' Roll

    Reflect-A-GOLD - 2” x 15’ roll.

    Reflect-A-GOLD is a metalized polyimide laminated to glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments.Ultra light-weight and easy to apply.

    Highly reflective, it is the ideal material to reflect radiant heat away from fuel tanks, body panels, engine compartments, bulk heads, seat bottoms – any area that needs protection from heat.

    • For fuel tanks, body panels, engine compartments, bulk heads, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light-weight and flexible-Trim to size
    • Used by the top race teams around the world including Chad Reed's TwoTwo Motorsports

    Material: metalized polyimide film laminated to glass cloth with a high temperature pressure sensitive adhesive
    Size: .012"
    Temperature Rating: 850°F Continuous, 1500°F Intermittent
    Color: Gold

     

    Learn More
  5. Reflect-A-GOLD Heat Reflective Material   1-1/2"x15' Roll
    $32.95
    Reflect-A-GOLD Heat Reflective Material 1-1/2"x15' Roll

    Reflect-A-GOLD - 1-1/2” x 15’ roll.

    Reflect-A-GOLD is a metalized polyimide laminated to glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments.Ultra light-weight and easy to apply.

    Highly reflective, it is the ideal material to reflect radiant heat away from fuel tanks, body panels, engine compartments, bulk heads, seat bottoms – any area that needs protection from heat.

    • For fuel tanks, body panels, engine compartments, bulk heads, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light-weight and flexible-Trim to size
    • Used by the top race teams around the world including Chad Reed's TwoTwo Motorsports

    Material: metalized polyimide film laminated to glass cloth with a high temperature pressure sensitive adhesive
    Size: .012"
    Temperature Rating: 850°F Continuous, 1500°F Intermittent
    Color: Gold

     

    Learn More
  6. Reflect-A-GOLD Heat Reflective Material 12"x24" Sheet
    $34.95
    Reflect-A-GOLD Heat Reflective Material 12"x24" Sheet

    Reflect-A-GOLD - 12” x 24” sheet.

    Reflect-A-GOLD is a metalized polyimide laminated to glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments.Ultra light-weight and easy to apply.

    Highly reflective, it is the ideal material to reflect radiant heat away from fuel tanks, body panels, engine compartments, bulk heads, seat bottoms – any area that needs protection from heat.

    • For fuel tanks, body panels, engine compartments, bulk heads, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light-weight and flexible-Trim to size
    • Used by the top race teams around the world including Chad Reed's TwoTwo Motorsports

    Material: metalized polyimide film laminated to glass cloth with a high temperature pressure sensitive adhesive
    Size: .012"
    Temperature Rating: 850°F Continuous, 1500°F Intermittent
    Color: Gold

     

    Learn More
  7. Reflect-A-GOLD Heat Reflective Material 12"x12" Sheet
    $18.95
    Reflect-A-GOLD Heat Reflective Material 12"x12" Sheet

    Reflect-A-GOLD - 12” x 12” sheet.

    Reflect-A-GOLD is a metalized polyimide laminated to glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments.Ultra light-weight and easy to apply.

    Highly reflective, it is the ideal material to reflect radiant heat away from fuel tanks, body panels, engine compartments, bulk heads, seat bottoms – any area that needs protection from heat.

    • For fuel tanks, body panels, engine compartments, bulk heads, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light-weight and flexible-Trim to size
    • Used by the top race teams around the world including Chad Reed's TwoTwo Motorsports

    Material: metalized polyimide film laminated to glass cloth with a high temperature pressure sensitive adhesive
    Size: .012"
    Temperature Rating: 850°F Continuous, 1500°F Intermittent
    Color: Gold

     

    Learn More
  8. Heat Shroud – Aluminized Sleeving
    $34.95
    Heat Shroud – Aluminized Sleeving

    Heat Shroud - 1/2" to 1-1/4" ID x 3 ft

    Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same product as DEI Heat Sheath, but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

    Added Versatility Because of the hook and loop closure, the single size of Heat Shroud can be adjusted to fit lines from 1/2" up to to 1 1/4" diameter.

    Material: Aluminized Mylar bonded to 19oz woven glass fiber
    Size: various
    Temperature Rating: 500°F Continuous, 2000°F Intermittent
    Color: Silver

    Learn More
  9. Ultra Sheath MA – Next Generation Sleeving
    $19.95
    Ultra Sheath MA – Next Generation Sleeving

    Extreme Heat Line & Hose Protection - 1/2" ID x 3ft

    Designed to be the ultimate protection for your cables, lines, wire or hoses. Ultra Sheath MA™ has a higher sustained heat capability of up to 1100°F and is more flexible than standard foil or bonded aluminum products. Constructed from a process that impregnates molten aluminum to the core fabric giving it higher heat reflective properties. It’s the perfect choice for tight high heat applications.

    • Easy to trim to desired length
    • Direct heat to 1100°F
    • Tightly woven fibers impregnated by molten aluminum give it it’s highly reflective properties
    • Won't flake or crack
    • Ultra Lightweight material, great for racing applications
    • Also available in bulk lengths

    Material: Bonded Molten Aluminum-fiberglass construction
    Size: 12oz fabric, .014" thick
    Temperature Rating: 1100°F Continuous, 2000°F Intermittent
    Color: Silver

     

     

    Learn More
Desc

Items 1-9 of 10

View as Grid List
per page
To Top