In stock
SKU
UNL-DUAL24F120RW

UniLight 24mm, 12Wx2 Navigation & Strobe, T-Fuse - Red/White

$42.00
24mm, 12Wx2 Navigation & Strobe, T-Fuse Red/White. A white 8Wx2 flashlight and a 4Wx2 position light combined in a housing with integrated cooling surfaces. Both lights are individually controlled and thus ideally suited for the combined operation as position and flashlight. An integrated overtemperature protection switches off the system in case of overheating. The luminaire is delivered as a ready assembled unit on an aluminium cooling plate and a changeable polycarbonate cap as covering. The luminaire is ready to use for 2S Lipo (ca. 8V) operation. With 3S (12V), the enclosed resistor has to be used. Alternatively use a 4W-3S and a 8W-3S adapter cable. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These luminaires with assembly of cooling elemets are suitable for the combined operation as position and flashlight, i.e. the position light glows continuously, the white 8W luminaire solely blinks/flashes. Make sure that air convection is possible. Please check operation temperatures after installation. Technical Data. Electricity: 8W reference power, 8(12)V, 0.7A and 4W reference power, 8(12)V, 0.35A. Beam angle: >160°. Dimension base panel: 24x75x9mm. Thickness assembly plate: 2mm. Luminous flux: 2x50 Lumen RED. Luminous flux: 2x70 Lumen GREEN. Luminous flux: 2x200 Lumen WHITE. Weight: 15g (without cable). Delivery: ready to use with 2m connection cable and series resistor for 2S, resistors for 3S enclosed. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!.

24mm, 12Wx2 Navigation & Strobe, T-Fuse Red/White

A white 8Wx2 flashlight and a 4Wx2 position light combined in a housing with integrated cooling surfaces. Both lights are individually controlled and thus ideally suited for the combined operation as position and flashlight. An integrated overtemperature protection switches off the system in case of overheating.

The luminaire is delivered as a ready assembled unit on an aluminium cooling plate and a changeable polycarbonate cap as covering. The luminaire is ready to use for 2S Lipo (ca. 8V) operation. With 3S (12V), the enclosed resistor has to be used. Alternatively use a 4W-3S and a 8W-3S adapter cable.

Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These luminaires with assembly of cooling elemets are suitable for the combined operation as position and flashlight, i.e. the position light glows continuously, the white 8W luminaire solely blinks/flashes. Make sure that air convection is possible. Please check operation temperatures after installation.
Technical Data

Electricity: 8W reference power, 8(12)V, 0.7A and 4W reference power, 8(12)V, 0.35A
Beam angle: >160°
Dimension base panel: 24x75x9mm
Thickness assembly plate: 2mm
Luminous flux: 2x50 Lumen RED
Luminous flux: 2x70 Lumen GREEN
Luminous flux: 2x200 Lumen WHITE
Weight: 15g (without cable)
Delivery: ready to use with 2m connection cable and series resistor for 2S, resistors for 3S enclosed

The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

Note: The LED lights are extremely bright! Never look directly into a LED!

More Information
SKU UNL-DUAL24F120RW
Write Your Own Review
Only registered users can write reviews. Please, Sign in or create an account
To Top